Skip to content

MorseApplet

Jump to bottom
Travis Goodspeed edited this page Jul 31, 2018 · 1 revision

The Morse applet can be used to transmit Morse code by a carrier wave on the currently selected frequency. These can be received on a Single Sideband (SSB) receiver, such as the Yaesu FT-817 or Kenwood TH-D74.

Press 7 to transmit 73 (goodbye), 1 to transmit CQ, or 0 to transmit K. Pressing / will transmit the call sign.

Pressing = placing the watch into a raw CW mode, in which the sidebutton or the + key will act as a straight key. Press = again to exit raw mode.

Clone this wiki locally