Interactive Pinout

User Manual

• bottom microUSB is required for operation
• top microUSB is sometimes needed for firmware updates
• blinking blue LD2 means "alive"
• red LD3 means "board has failed test
• green LD1 next to blinking blue means "test successful"

See https://github.com/rusefi/rusefi-hardware/tree/main/digital-inputs for firmware

Part of https://github.com/rusefi/rusefi infrastucture

https://github.com/rusefi/rusefi/wiki/dev-hardware-quality-control

Digital Inputs

• 48 channels of high/low digital inputs
• pin requirment: 4 ADC inputs and 9 GPIO

GPIO:

• output: x4 address pins
• output: x4 test control pins
• output: mux off

See #6

Changelog

rev C

• CAN board fix
• second CAN board added
• OUT0 pin moved from PA11 to PD8
• https://github.com/rusefi/stim/issues?q=label%3Arev-C+is%3Aclosed

rev 0.2

• CAN bus
• superseal header

rev 0.1

• it works!