Interactive Pinout

User Manual

bottom microUSB is required for operation
top microUSB is sometimes needed for firmware updates
blinking blue LD2 means "alive"
red LD3 means "board has failed test
green LD1 next to blinking blue means "test successful"

See https://github.com/rusefi/rusefi-hardware/tree/main/digital-inputs for firmware

Part of https://github.com/rusefi/rusefi infrastucture

https://github.com/rusefi/rusefi/wiki/dev-hardware-quality-control

Digital Inputs

48 channels of high/low digital inputs
pin requirment: 4 ADC inputs and 9 GPIO

GPIO:

output: x4 address pins
output: x4 test control pins
output: mux off

See #6

Changelog

rev C

CAN board fix
second CAN board added
OUT0 pin moved from PA11 to PD8
https://github.com/rusefi/stim/issues?q=label%3Arev-C+is%3Aclosed

rev 0.2

CAN bus
superseal header

rev 0.1

it works!