Update to boost 1.83 and be sure we compile in gcc13. #337

Workflow file for this run

	###
	# Initially copied from
	# https://github.com/actions/starter-workflows/blob/main/ci/python-package.yml
	# And later based on the version I (jamadden) updated at gevent/gevent
	#
	# Original comment follows.
	###
	###
	# This workflow will install Python dependencies, run tests and lint with a variety of Python versions
	# For more information see: https://help.github.com/actions/language-and-framework-guides/using-python-with-github-actions
	###

	###
	# Important notes on GitHub actions:
	#
	# - We only get 2,000 free minutes a month (private repos)
	# - We only get 500MB of artifact storage
	# - Cache storage is limited to 7 days and 5GB.
	# - macOS minutes are 10x as expensive as Linux minutes
	# - windows minutes are twice as expensive.
	#
	# So keep those workflows light.
	#
	# In December 2020, github only supports x86/64. If we wanted to test
	# on other architectures, we can use docker emulation, but there's no
	# native support.
	#
	# Another major downside: You can't just re-run the job for one part
	# of the matrix. So if there's a transient test failure that hit, say, 3.8,
	# to get a clean run every version of Python runs again. That's bad.
	# https://github.community/t/ability-to-rerun-just-a-single-job-in-a-workflow/17234/65

	name: tests


	# Triggers the workflow on push or pull request events
	on: [push, pull_request]
	# Limiting to particular branches might be helpful to conserve minutes.
	#on:
	# push:
	# branches: [ $default-branch ]
	# pull_request:
	# branches: [ $default-branch ]

	env:
	# Weirdly, this has to be a top-level key, not ``defaults.env``
	PYTHONHASHSEED: 8675309
	PYTHONUNBUFFERED: 1
	PYTHONDONTWRITEBYTECODE: 1
	# PYTHONDEVMODE leads to crashes in pylibmc.
	# See https://github.com/lericson/pylibmc/issues/254
	# - PYTHONDEVMODE=1
	PYTHONFAULTHANDLER: 1

	PIP_UPGRADE_STRATEGY: eager
	# Don't get warnings about Python 2 support being deprecated. We
	# know. The env var works for pip 20.
	PIP_NO_PYTHON_VERSION_WARNING: 1
	PIP_NO_WARN_SCRIPT_LOCATION: 1

	# Disable some warnings produced by libev especially and also some Cython generated code.
	# These are shared between GCC and clang so it must be a minimal set.
	# TODO: Figure out how to set env vars per platform without resorting to inline scripting.
	CFLAGS: -Ofast -pipe
	CXXFLAGS: -Ofast -pipe
	# Uploading built wheels for releases.
	# TWINE_PASSWORD is encrypted and stored directly in the
	# travis repo settings.
	TWINE_USERNAME: __token__

	###
	# caching
	###
	CCACHE_DIR: ~/.ccache
	CC: "ccache gcc"
	CCACHE_NOCPP2: true
	CCACHE_SLOPPINESS: file_macro,time_macros,include_file_ctime,include_file_mtime
	CCACHE_NOHASHDIR: true

	#


	jobs:
	test:
	runs-on: ${{ matrix.os }}
	strategy:
	matrix:
	# 3.12.1 breaks zope.testrunner.
	# See https://github.com/zopefoundation/zope.testrunner/issues/157
	python-version: ['pypy-3.10', '3.12.0', 3.8, 3.9, '3.10', '3.11']
	os: [ubuntu-latest, macos-latest]
	exclude:
	# Can't build persistent on 3.12 with -UNDEBUG because it
	# accesses fields of objects that aren't there in assert statements;
	# we build linux with assertions enabled, and unless there is a 3.12
	# persistent wheel, we have to exclude that one.
	# The same thing goes for PyPy.
	- os: ubuntu-latest
	python-version: pypy-3.10

	steps:
	- name: checkout
	uses: actions/checkout@v3

	- name: Set up Python ${{ matrix.python-version }}
	uses: actions/setup-python@v4
	with:
	python-version: ${{ matrix.python-version }}
	cache: 'pip'
	cache-dependency-path: setup.py

	- name: Install ccache, configure CFLAGS (ubuntu)
	uses: ./.github/actions/config-cc

	- name: Install native libs
	uses: ./.github/actions/install-native-libs


	- name: Install Build Dependencies
	run: \|
	pip install -U pip
	pip install -U -q setuptools wheel twine
	pip install -q -U 'cython>=3.0'
	pip install -U coverage
	pip install -U cffi
	- name: Build mysqlclient
	# Ubuntu 20 doesn't have libmysqlclient.20, but mysqlclient
	# client binaries on PyPI are linked against that. We can install that,
	# but then SSL breaks for an unknown reason, and we can't disable SSL
	# because authentication requires it (maybe we could change the authentiaction plugin?)
	# So instead we install the development sources and compile mysqlclient locally.
	# The relevant package, libmysqlclient-dev, is already installed.
	if: startsWith( matrix.os, 'ubuntu-20')
	run: \|
	pip install --no-binary :all: mysqlclient

	- name: Install RelStorage (non-Mac)
	if: ${{ ! startsWith(runner.os, 'Mac') }}
	run: \|
	python setup.py bdist_wheel
	WHL=$(ls dist/*whl)
	python -m pip install -U "$WHL[test,docs,all_tested_drivers]"
	env:
	# Ensure we test with assertions enabled.
	# As opposed to the manylinux builds, which we distribute and
	# thus only use O3 (because Ofast enables fast-math, which has
	# process-wide effects), we test with Ofast here, because we
	# expect that some people will compile it themselves with that setting.
	CPPFLAGS: "-Ofast -UNDEBUG"

	- name: Install RelStorage (Mac)
	if: startsWith(runner.os, 'Mac')
	run: \|
	python setup.py bdist_wheel
	WHL=$(ls dist/*whl)
	python -m pip install -U "$WHL[test,docs,all_tested_drivers]"
	env:
	# Unlike the above, we are actually distributing these
	# wheels, so they need to be built for production use.
	CPPFLAGS: "-O3"
	# Build for both architectures
	ARCHFLAGS: "-arch x86_64 -arch arm64"

	- name: Check RelStorage build
	run: \|
	ls -l dist
	twine check dist/*
	- name: Upload RelStorage wheel
	uses: actions/upload-artifact@v2
	with:
	name: RelStorage-${{ runner.os }}-${{ matrix.python-version }}.whl
	path: dist/*whl
	- name: lint
	if: matrix.python-version == '3.11' && startsWith(runner.os, 'Linux')
	# At this writing, PyLint 2.17/astroid 2.15 won't work on 3.12
	run: \|
	pip install -U pylint
	python -m pylint --limit-inference-results=1 --rcfile=.pylintrc relstorage -f parseable -r n
	- name: Initialize Test Databases
	if: startsWith(runner.os, 'macOS')
	run: \|
	brew services start mysql
	brew services start postgresql
	# Make sure postgresql is accepting connections.
	# TODO: Use pg_isready in a loop?
	sleep 5
	# XXX: mysql isn't currently starting. Why? So
	# skip initializing it.
	#
	# brew postgres uses the current username, apparently, instead of
	# the standard "postgres" user as the root. It still uses 'postgres'
	# as the default database, though.
	brew services list
	RELSTORAGETEST_PG_UNAME=$USER RELSTORAGETEST_PG_DBNAME=postgres .travis/postgres.sh
	- name: Initialize Test Databases
	if: startsWith(runner.os, 'Linux')
	run: \|
	sudo systemctl start mysql.service
	echo Configuring MySQL
	RELSTORAGETEST_MY_PW="--password=root" .travis/mysql.sh
	# XXX: Disabled: The software is installed, but isn't running by default,
	# apparently. They really want you to use a docker service.
	# echo Configuring PostgreSQL
	# .travis/postgres.sh
	- name: Run tests and report coverage
	uses: ./.github/actions/run-tests
	with:
	useCoverage: ${{ !startsWith(matrix.python-version, 'pypy') }}
	- name: Coveralls Parallel
	uses: coverallsapp/github-action@v2
	if: ${{ !startsWith(matrix.python-version, 'pypy') }}
	with:
	flag-name: run-${{ join(matrix.*, '-') }}
	parallel: true
	- name: Publish package to PyPI (mac)
	# We cannot 'uses: pypa/[email protected]' because
	# that's apparently a container action, and those don't run on
	# the Mac.
	if: github.event_name == 'push' && startsWith(github.ref, 'refs/tags') && startsWith(runner.os, 'Mac')
	env:
	TWINE_PASSWORD: ${{ secrets.TWINE_PASSWORD }}
	run: \|
	twine upload --skip-existing dist/*

	coveralls-finish:
	needs: test
	if: ${{ always() }}
	runs-on: ubuntu-latest
	steps:
	- name: Coveralls Finished
	uses: coverallsapp/github-action@v2
	with:
	parallel-finished: true

	manylinux:
	needs: test
	runs-on: ubuntu-latest
	# We use a regular Python matrix entry to share as much code as possible.
	strategy:
	matrix:
	python-version: [3.9]
	image:
	- manylinux_2_28_x86_64
	- manylinux2014_aarch64
	- manylinux2014_ppc64le
	- manylinux2014_s390x
	- manylinux2014_x86_64
	- musllinux_1_1_x86_64
	- musllinux_1_1_aarch64
	name: ${{ matrix.image }}
	steps:
	- name: checkout
	uses: actions/checkout@v3
	- name: Set up Python ${{ matrix.python-version }}
	uses: actions/setup-python@v4
	with:
	python-version: ${{ matrix.python-version }}
	- name: Set up QEMU
	uses: docker/setup-qemu-action@v2
	with:
	platforms: all
	- name: Build RelStorage
	env:
	DOCKER_IMAGE: quay.io/pypa/${{ matrix.image }}
	run: bash ./scripts/releases/make-manylinux
	- name: Store RelStorage wheels
	uses: actions/upload-artifact@v3
	with:
	path: wheelhouse/*whl
	name: ${{ matrix.image }}_wheels.zip
	- name: Publish package to PyPI
	uses: pypa/[email protected]
	if: github.event_name == 'push' && startsWith(github.ref, 'refs/tags')
	with:
	user: __token__
	password: ${{ secrets.TWINE_PASSWORD }}
	skip_existing: true
	packages_dir: wheelhouse/


	# TODO:
	# * Use YAML syntax to share snippets, like the old .travis.yml did
	# Sadly, as of 2021-02-01, Github Actions does not support anchors at
	# all. Just having an anchor results in an error:
	#
	# The workflow is not valid. .github/workflows/tests.yml: Anchors
	# are not currently supported. Remove the anchor 'an-strategy'
	#
	# The alternative of using composite actions doesn't work either,
	# because composite actions are limited to running shell scripts.
	# Steps in them can't call other actions with `uses:`, and nor can
	# they be conditional with `if:`.

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Update to boost 1.83 and be sure we compile in gcc13. #337

Workflow file

Update to boost 1.83 and be sure we compile in gcc13. #337

Jobs

Run details

Workflow file for this run