Racecar

Racecar is a friendly and easy-to-approach Kafka consumer framework. It allows you to write small applications that process messages stored in Kafka topics while optionally integrating with your Rails models.

The framework is based on rdkafka-ruby, which, when used directly, can be a challenge: it's a flexible library with lots of knobs and options. Most users don't need that level of flexibility, though. Racecar provides a simple and intuitive way to build and configure Kafka consumers.

NOTE: Racecar requires Kafka 0.10 or higher.

Table of content

1. Installation
2. Usage
   1. Creating consumers
   2. Running consumers
   3. Producing messages
   4. Configuration
   5. Testing consumers
   6. Deploying consumers
   7. Handling errors
   8. Logging
   9. Operations
   10. Upgrading from v1 to v2
   11. Compression
3. Development
4. Contributing
5. Support and Discussion
6. Copyright and license

Installation

Add this line to your application's Gemfile:

gem 'racecar'

And then execute:

$ bundle

Or install it yourself as:

$ gem install racecar

Then execute (if you're in a Rails application):

$ bundle exec rails generate racecar:install

This will add a config file in config/racecar.yml.

Usage

Racecar is built for simplicity of development and operation. First, a short introduction to the Kafka consumer concept as well as some basic background on Kafka.

Kafka stores messages in so-called partitions which are grouped into topics. Within a partition, each message gets a unique offset.

In Kafka, consumer groups are sets of processes that collaboratively process messages from one or more Kafka topics; they divide up the topic partitions amongst themselves and make sure to reassign the partitions held by any member of the group that happens to crash or otherwise becomes unavailable, thus minimizing the risk of disruption. A consumer in a group is responsible for keeping track of which messages in a partition it has processed – since messages are processed in-order within a single partition, this means keeping track of the offset into the partition that has been processed. Consumers periodically commit these offsets to the Kafka brokers, making sure that another consumer can resume from those positions if there is a crash.

Creating consumers

A Racecar consumer is a simple Ruby class that inherits from Racecar::Consumer:

class UserBanConsumer < Racecar::Consumer
  subscribes_to "user_banned"

  def process(message)
    data = JSON.parse(message.value)
    user = User.find(data["user_id"])
    user.banned = true
    user.save!
  end
end

In order to create your own consumer, run the Rails generator racecar:consumer:

$ bundle exec rails generate racecar:consumer TapDance

This will create a file at app/consumers/tap_dance_consumer.rb which you can modify to your liking. Add one or more calls to subscribes_to in order to have the consumer subscribe to Kafka topics.

Now run your consumer with bundle exec racecar TapDanceConsumer.

Note: if you're not using Rails, you'll have to add the file yourself. No-one will judge you for copy-pasting it.

Running consumers in parallel (experimental)

Warning - limited battle testing in production environments; use at your own risk!

If you want to process different partitions in parallel, and don't want to deploy a number of instances matching the total partitions of the topic, you can specify the number of workers to spin up - that number of processes will be forked, and each will register its own consumer in the group. Some things to note:

• This would make no difference on a single partitioned topic - only one consumer would ever be assigned a partition. A couple of example configurations to process all partitions in parallel (we'll assume a 15 partition topic):
  • Parallel workers set to 3, 5 separate instances / replicas running in your container orchestrator
  • Parallel workers set to 5, 3 separate instances / replicas running in your container orchestrator
• Since we're forking new processes, the memory demands are a little higher
  • From some initial testing, running 5 parallel workers requires no more than double the memory of running a Racecar consumer without parallelism.

The number of parallel workers is configured per consumer class; you may only want to take advantage of this for busier consumers:

class ParallelProcessingConsumer < Racecar::Consumer
  subscribes_to "some-topic"

  self.parallel_workers = 5

  def process(message)
    ...
  end
end

Initializing consumers

You can optionally add an initialize method if you need to do any set-up work before processing messages, e.g.

class PushNotificationConsumer < Racecar::Consumer
  subscribes_to "notifications"

  def initialize
    @push_service = PushService.new # pretend this exists.
  end

  def process(message)
    data = JSON.parse(message.value)

    @push_service.notify!(
      recipient: data.fetch("recipient"),
      notification: data.fetch("notification"),
    )
  end
end

This is useful to do any one-off work that you wouldn't want to do for each and every message.

Setting the starting position

When a consumer is started for the first time, it needs to decide where in each partition to start. By default, it will start at the beginning, meaning that all past messages will be processed. If you want to instead start at the end of each partition, change your subscribes_to like this:

subscribes_to "some-topic", start_from_beginning: false

Note that once the consumer has started, it will commit the offsets it has processed until and in the future will resume from those.

Processing messages in batches

If you want to process whole batches of messages at a time, simply rename your #process method to #process_batch. The method will now be called with an array of message objects:

class ArchiveEventsConsumer < Racecar::Consumer
  subscribes_to "events"

  def process_batch(messages)
    file_name = [
      messages.first.topic, # the topic this batch of messages came from.
      messages.first.partition, # the partition this batch of messages came from.
      messages.first.offset, # offset of the first message in the batch.
      messages.last.offset, # offset of the last message in the batch.
    ].join("-")

    File.open(file_name, "w") do |file|
      # the messages in the batch.
      messages.each do |message|
        file << message.value
      end
    end
  end
end

An important detail is that, if an exception is raised while processing a batch, the whole batch is re-processed.

Message headers

Any headers set on the message will be available when consuming the message:

message.headers #=> { "Header-A" => 42, ... }

Long-running message processing

In order to avoid your consumer being kicked out of its group during long-running message processing operations, you'll need to let Kafka regularly know that the consumer is still healthy. There's two mechanisms in place to ensure that:

Heartbeats: They are automatically sent in the background and ensure the broker can still talk to the consumer. This will detect network splits, ungraceful shutdowns, etc.

Message Fetch Interval: Kafka expects the consumer to query for new messages within this time limit. This will detect situations with slow IO or the consumer being stuck in an infinite loop without making actual progress. This limit applies to a whole batch if you do batch processing. Use max_poll_interval to increase the default 5 minute timeout, or reduce batching with fetch_messages.

Tearing down resources when stopping

When a Racecar consumer shuts down, it gets the opportunity to tear down any resources held by the consumer instance. For example, it may make sense to close any open files or network connections. Doing so is simple: just implement a #teardown method in your consumer class and it will be called during the shutdown procedure.

class ArchiveConsumer < Racecar::Consumer
  subscribes_to "events"

  def initialize
    @file = File.open("archive", "a")
  end

  def process(message)
    @file << message.value
  end

  def teardown
    @file.close
  end
end

Running consumers

Racecar is first and foremost an executable consumer runner. The racecar executable takes as argument the name of the consumer class that should be run. Racecar automatically loads your Rails application before starting, and you can load any other library you need by passing the --require flag, e.g.

$ bundle exec racecar --require dance_moves TapDanceConsumer

The first time you execute racecar with a consumer class a consumer group will be created with a group id derived from the class name (this can be configured). If you start racecar with the same consumer class argument multiple times, the processes will join the existing group – even if you start them on other nodes. You will typically want to have at least two consumers in each of your groups – preferably on separate nodes – in order to deal with failures.

Producing messages

Consumers can produce messages themselves, allowing for powerful stream processing applications that transform and filter message streams. The API for this is simple:

class GeoCodingConsumer < Racecar::Consumer
  subscribes_to "pageviews"

  def process(message)
    pageview = JSON.parse(message.value)
    ip_address = pageview.fetch("ip_address")

    country = GeoCode.country(ip_address)

    # Enrich the original message:
    pageview["country"] = country

    # The `produce` method enqueues a message to be delivered after #process
    # returns. It won't actually deliver the message.
    produce(JSON.dump(pageview), topic: "pageviews-with-country", key: pageview["id"])
  end
end

The deliver! method can be used to block until the broker received all queued published messages (according to the publisher ack settings). This will automatically being called in the shutdown procedure of a consumer.

You can set message headers by passing a headers: option with a Hash of headers.

Standalone Producer

Racecar provides a standalone producer to publish messages to Kafka directly from your Rails application:

# app/controllers/comments_controller.rb
class CommentsController < ApplicationController
  def create
    @comment = Comment.create!(params)

    # This will publish a JSON representation of the comment to the `comments` topic
    # in Kafka. Make sure to create the topic first, or this may fail.
    Racecar.produce_sync(value:comment.to_json, topic: "comments")
  end
end

The above example will block the server process until the message has been delivered. If you want deliveries to happen in the background in order to free up your server processes more quickly, call #deliver_async instead:

# app/controllers/comments_controller.rb
class CommentsController < ApplicationController
  def show
    @comment = Comment.find(params[:id])

    event = {
      name: "comment_viewed",
      data: {
        comment_id: @comment.id,
        user_id: current_user.id
      }
    }

    # By delivering messages asynchronously you free up your server processes faster.
    Racecar.produce_async(value: event.to_json, topic: "activity")
  end
end

In addition to improving response time, delivering messages asynchronously also protects your application against Kafka availability issues -- if messages cannot be delivered, they'll be buffered for later and retried automatically.

A third method is to produce messages first (without delivering the messages to Kafka yet), and deliver them synchronously later:

 # app/controllers/comments_controller.rb
 class CommentsController < ApplicationController
   def create
     @comment = Comment.create!(params)

     event = {
       name: "comment_created",
       data: {
         comment_id: @comment.id
         user_id: current_user.id
       }
     }

     # This will queue the two messages in the internal buffer and block server process until they are delivered.
    Racecar.wait_for_delivery do
      Racecar.produce_async(comment.to_json, topic: "comments")
      Racecar.produce_async(event.to_json, topic: "activity")
    end
   end
 end

Configuration

Racecar provides a flexible way to configure your consumer in a way that feels at home in a Rails application. If you haven't already, run bundle exec rails generate racecar:install in order to generate a config file. You'll get a separate section for each Rails environment, with the common configuration values in a shared common section.

Note: many of these configuration keys correspond directly to similarly named concepts in rdkafka-ruby; for more details on low-level operations, read that project's documentation.

It's also possible to configure Racecar using environment variables. For any given configuration key, there should be a corresponding environment variable with the prefix RACECAR_, in upper case. For instance, in order to configure the client id, set RACECAR_CLIENT_ID=some-id in the process in which the Racecar consumer is launched. You can set brokers by passing a comma-separated list, e.g. RACECAR_BROKERS=kafka1:9092,kafka2:9092,kafka3:9092.

Finally, you can configure Racecar directly in Ruby. The file config/racecar.rb will be automatically loaded if it exists; in it, you can configure Racecar using a simple API:

Racecar.configure do |config|
  # Each config variable can be set using a writer attribute.
  config.brokers = ServiceDiscovery.find("kafka-brokers")
end

Basic configuration

• brokers – A list of Kafka brokers in the cluster that you're consuming from. Defaults to localhost on port 9092, the default Kafka port.
• client_id – A string used to identify the client in logs and metrics.
• group_id – The group id to use for a given group of consumers. Note that this must be different for each consumer class. If left blank a group id is generated based on the consumer class name such that (for example) a consumer with the class name BaconConsumer would default to a group id of bacon-consumer.
• group_id_prefix – A prefix used when generating consumer group names. For instance, if you set the prefix to be kevin. and your consumer class is named BaconConsumer, the resulting consumer group will be named kevin.bacon-consumer.

Batches

• fetch_messages - The number of messages to fetch in a single batch. This can be set on a per consumer basis.

Logging

• logfile – A filename that log messages should be written to. Default is nil, which means logs will be written to standard output.
• log_level – The log level for the Racecar logs, one of debug, info, warn, or error. Default is info.

Consumer checkpointing

The consumers will checkpoint their positions from time to time in order to be able to recover from failures. This is called committing offsets, since it's done by tracking the offset reached in each partition being processed, and committing those offset numbers to the Kafka offset storage API. If you can tolerate more double-processing after a failure, you can increase the interval between commits in order to better performance. You can also do the opposite if you prefer less chance of double-processing.

• offset_commit_interval – How often to save the consumer's position in Kafka. Default is every 10 seconds.

Timeouts & intervals

All timeouts are defined in number of seconds.

• session_timeout – The idle timeout after which a consumer is kicked out of the group. Consumers must send heartbeats with at least this frequency.
• heartbeat_interval – How often to send a heartbeat message to Kafka.
• max_poll_interval – The maximum time between two message fetches before the consumer is kicked out of the group. Put differently, your (batch) processing must finish earlier than this.
• pause_timeout – How long to pause a partition for if the consumer raises an exception while processing a message. Default is to pause for 10 seconds. Set this to 0 in order to disable automatic pausing of partitions or to -1 to pause indefinitely.
• pause_with_exponential_backoff – Set to true if you want to double the pause_timeout on each consecutive failure of a particular partition.
• socket_timeout – How long to wait when trying to communicate with a Kafka broker. Default is 30 seconds.
• max_wait_time – How long to allow the Kafka brokers to wait before returning messages. A higher number means larger batches, at the cost of higher latency. Default is 1 second.
• message_timeout – How long to try to deliver a produced message before finally giving up. Default is 5 minutes. Transient errors are automatically retried. If a message delivery fails, the current read message batch is retried.
• statistics_interval – How frequently librdkafka should publish statistics about its consumers and producers; you must also add a statistics_callback method to your processor, otherwise the stats are disabled. The default is 1 second, however this can be quite memory hungry, so you may want to tune this and monitor.

Memory & network usage

Kafka is really good at throwing data at consumers, so you may want to tune these variables in order to avoid ballooning your process' memory or saturating your network capacity.

Racecar uses rdkafka-ruby under the hood, which fetches messages from the Kafka brokers in a background thread. This thread pushes fetch responses, possible containing messages from many partitions, into a queue that is read by the processing thread (AKA your code). The main way to control the fetcher thread is to control the size of those responses and the size of the queue.

• max_bytes — Maximum amount of data the broker shall return for a Fetch request.
• min_message_queue_size — The minimum number of messages in the local consumer queue.

The memory usage limit is roughly estimated as max_bytes * min_message_queue_size, plus whatever your application uses.

SSL encryption, authentication & authorization

• security_protocol – Protocol used to communicate with brokers (:ssl)
• ssl_ca_location – File or directory path to CA certificate(s) for verifying the broker's key
• ssl_crl_location – Path to CRL for verifying broker's certificate validity
• ssl_keystore_location – Path to client's keystore (PKCS#12) used for authentication
• ssl_keystore_password – Client's keystore (PKCS#12) password
• ssl_certificate_location – Path to the certificate
• ssl_key_location – Path to client's certificate used for authentication
• ssl_key_password – Client's certificate password

SASL encryption, authentication & authorization

Racecar has support for using SASL to authenticate clients using either the GSSAPI or PLAIN mechanism either via plaintext or SSL connection.

• security_protocol – Protocol used to communicate with brokers (:sasl_plaintext :sasl_ssl)

• sasl_mechanism – SASL mechanism to use for authentication (GSSAPI PLAIN SCRAM-SHA-256 SCRAM-SHA-512)

• sasl_kerberos_principal – This client's Kerberos principal name

• sasl_kerberos_kinit_cmd – Full kerberos kinit command string, %{config.prop.name} is replaced by corresponding config object value, %{broker.name} returns the broker's hostname

• sasl_kerberos_keytab – Path to Kerberos keytab file. Uses system default if not set

• sasl_kerberos_min_time_before_relogin – Minimum time in milliseconds between key refresh attempts

• sasl_username – SASL username for use with the PLAIN and SASL-SCRAM-.. mechanism

• sasl_password – SASL password for use with the PLAIN and SASL-SCRAM-.. mechanism

Producing messages

These settings are related to consumers that produce messages to Kafka.

• partitioner – The strategy used to determine which topic partition a message is written to when Racecar produces a value to Kafka. The codec needs to be one of consistent, consistent_random murmur2 murmur2_random fnv1a fnv1a_random either as a Symbol or a String, defaults to consistent_random
• producer_compression_codec – If defined, Racecar will compress messages before writing them to Kafka. The codec needs to be one of gzip, lz4, or snappy, either as a Symbol or a String.

Datadog monitoring

Racecar supports Datadog monitoring integration. If you're running a normal Datadog agent on your host, you just need to set datadog_enabled to true, as the rest of the settings come with sane defaults.

• datadog_enabled – Whether Datadog monitoring is enabled (defaults to false).
• datadog_host – The host running the Datadog agent.
• datadog_port – The port of the Datadog agent.
• datadog_socket_path – The unix domain socket of the Datadog agent (when set takes precedence over host/port).
• datadog_namespace – The namespace to use for Datadog metrics.
• datadog_tags – Tags that should always be set on Datadog metrics.

Furthermore, there's a standard Datadog dashboard configuration file that you can import to get started with a Racecar dashboard for all of your consumers.

Consumers Without Rails

By default, if Rails is detected, it will be automatically started when the consumer is started. There are cases where you might not want or need Rails. You can pass the --without-rails option when starting the consumer and Rails won't be started.

Testing consumers

Since consumers are merely classes that implement a simple interface, they're dead simple to test.

Here's an example of testing a consumer class using RSpec and Rails:

# app/consumers/create_contacts_consumer.rb
#
# Creates a Contact whenever an email address is written to the
# `email-addresses` topic.
class CreateContactsConsumer < Racecar::Consumer
  subscribes_to "email-addresses"

  def process(message)
    email = message.value

    Contact.create!(email: email)
  end
end

# spec/consumers/create_contacts_consumer_spec.rb
describe CreateContactsConsumer do
  it "creates a Contact for each email address in the topic" do
    message = double("message", value: "[email protected]")
    consumer = CreateContactsConsumer.new

    consumer.process(message)

    expect(Contact.where(email: "[email protected]")).to exist
  end
end

Deploying consumers

If you're already deploying your Rails application using e.g. Capistrano, all you need to do to run your Racecar consumers in production is to have some process supervisor start the processes and manage them for you.

Foreman is a very straightford tool for interfacing with several process supervisor systems. You define your process types in a Procfile, e.g.

racecar-process-payments: bundle exec racecar ProcessPaymentsConsumer
racecar-resize-images: bundle exec racecar ResizeImagesConsumer

If you've ever used Heroku you'll recognize the format – indeed, deploying to Heroku should just work if you add Racecar invocations to your Procfile and enable the Heroku integration

With Foreman, you can easily run these processes locally by executing foreman run; in production you'll want to export to another process management format such as Upstart or Runit. capistrano-foreman allows you to do this with Capistrano.

Deploying to Kubernetes

If you run your applications in Kubernetes, use the following Deployment spec as a starting point:

Recreate Strategy

apiVersion: apps/v1
kind: Deployment
metadata:
  name: my-racecar-deployment
  labels:
    app: my-racecar
spec
  replicas: 4 # <-- this is a good value if you have a multliple of 4 partitions
  selector:
    matchLabels:
      app: my-racecar
  strategy:
    type: Recreate # <-- this is the important part.
  template:
    metadata:
      labels:
        app: my-racecar
    spec:
      containers:
        - name: my-racecar
          image: my-racecar-image
          command: ["bundle", "exec", "racecar", "MyConsumer"]
          env: # <-- you can configure the consumer using environment variables!
            - name: RACECAR_BROKERS
              value: kafka1,kafka2,kafka3
            - name: RACECAR_OFFSET_COMMIT_INTERVAL
              value: 5

This configuration uses the recreate strategy which completely terminates all consumers before starting new ones. It's simple and easy to understand but can result in significant 'downtime' where no messages are processed.

Rolling Updates and 'sticky-cooperative' Assignment

A newer alternative is to use the consumer's "cooperative-sticky" assignment strategy which allows healthy consumers to keep processing their partitions while others are terminated. This can be combined with a restricted rolling update to minimize processing downtime.

Add to your Racecar config:

Racecar.configure do |c|
  c.partition_assignment_strategy = "cooperative-sticky"
end

Replace the Kubernetes deployment strategy with:

  strategy:
    type: RollingUpdate
    rollingUpdate:
        maxSurge: 0 # <- Never boot an excess consumer
        maxUnavailable: 1 # <- The deploy 'rolls' one consumer at a time

These two configurations should be deployed together.

While maxSurge should always be 0, maxUnavailable can be increased to reduce deployment times in exchange for longer pauses in message processing.

Liveness Probe

Racecar comes with a built-in liveness probe, primarily for use with Kubernetes, but useful for any deployment environment where you can periodically run a process to check the health of your consumer.

To use this feature:

1. Set the liveness_probe_enabled config option to true.
2. Configure your Kubernetes deployment liveness probe to run this command $ racecarctl liveness_probe

When enabled (see config) Racecar will touch the file at the specified path each time it finishes polling Kafka and processing the messages in the batch (if any).

The modified time of this file can be observed to determine when the consumer last exhibited 'liveness'.

Running racecarctl liveness_probe will return a successful exit status if the last 'liveness' event happened within an acceptable time, which you can set as liveness_probe_max_interval.

liveness_probe_max_interval should be long enough to account for both the Kafka polling time of max_wait_time and the processing time of a full message batch.

On receiving SIGTERM, Racecar will gracefully shut down and delete this file, causing the probe to fail immediately after exit.

You may wish to tolerate more than one failed probe run to accommodate for environmental variance and clock changes.

The Configuration section for the various ways the liveness probe can be configured. (We recommend environment variables).

Slow racecar.rb / racecar.yml? Skip config files!

If your config files need to do something expensive, such as load Rails, you can enable RACECAR_LIVENESS_PROBE_SKIP_CONFIG_FILES. The liveness probe command will then skip loading your configuration and execute quickly.

Most other configuration values can be set via the environment, we recommend you do this for liveness probe settings.

Example Kubernetes Configuration

apiVersion: apps/v1
kind: Deployment
spec:
  template:
    spec:
      containers:
      - name: consumer

        args:
        - racecar
        - SomeConsumer

        env:
        # Skip config loading to run fast, only the following values are needed
        - name: RACECAR_LIVENESS_PROBE_SKIP_CONFIG_FILES
          value: "true"
        - name: RACECAR_LIVENESS_PROBE_ENABLED
          value: "true"
        - name: RACECAR_LIVENESS_PROBE_FILE_PATH
          value: "/tmp/racecar-liveness"
        - name: RACECAR_LIVENESS_PROBE_MAX_INTERVAL
          value: "5"

        livenessProbe:
          exec:
            command:
            - racecarctl
            - liveness_probe

          # Allow up to 3 consecutive failures before terminating Pod:
          failureThreshold: 3

          # Wait 30 seconds before starting the probes:
          initialDelaySeconds: 30

          # Perform the check every 10 seconds:
          periodSeconds: 10

Deploying to Heroku

If you run your applications in Heroku and/or use the Heroku Kafka add-on, you application will be provided with 4 ENV variables that allow connecting to the cluster: KAFKA_URL, KAFKA_TRUSTED_CERT, KAFKA_CLIENT_CERT, and KAFKA_CLIENT_CERT_KEY.

Racecar has a built-in helper for configuring your application based on these variables – just add require "racecar/heroku" and everything should just work.

Please note aliasing the Heroku Kafka add-on will break this integration. If you have a need to do that, please ask on the discussion board.

# This takes care of setting up your consumer based on the ENV
# variables provided by Heroku.
require "racecar/heroku"

class SomeConsumer < Racecar::Consumer
  # ...
end

Running consumers in the background

While it is recommended that you use a process supervisor to manage the Racecar consumer processes, it is possible to daemonize the Racecar processes themselves if that is more to your liking. Note that this support is currently in alpha, as it hasn't been tested extensively in production settings.

In order to daemonize Racecar, simply pass in --daemonize when executing the command:

$ bundle exec racecar --daemonize ResizeImagesConsumer

This will start the consumer process in the background. A file containing the process id (the "pidfile") will be created, with the file name being constructed from the consumer class name. If you want to specify the name of the pidfile yourself, pass in --pidfile=some-file.pid.

Since the process is daemonized, you need to know the process id (PID) in order to be able to stop it. Use the racecarctl command to do this:

$ bundle exec racecarctl stop --pidfile=some-file.pid

Again, the recommended approach is to manage the processes using process managers. Only do this if you have to.

Handling errors

When processing messages from a Kafka topic, your code may encounter an error and raise an exception. The cause is typically one of two things:

1. The message being processed is somehow malformed or doesn't conform with the assumptions made by the processing code.
2. You're using some external resource such as a database or a network API that is temporarily unavailable.

In the first case, you'll need to either skip the message or deploy a new version of your consumer that can correctly handle the message that caused the error. In order to skip a message, handle the relevant exception in your #process method:

def process(message)
  data = JSON.parse(message.value)
  # ...
rescue JSON::ParserError => e
  puts "Failed to process message in #{message.topic}/#{message.partition} at offset #{message.offset}: #{e}"
  # It's probably a good idea to report the exception to an exception tracker service.
end

Since the exception is handled by your #process method and is no longer raised, Racecar will consider the message successfully processed. Tracking these errors in an exception tracker or some other monitoring system is highly recommended, as you otherwise will have little insight into how many messages are being skipped this way.

If, on the other hand, the exception was cause by a temporary network or database problem, you will probably want to retry processing of the message after some time has passed. By default, if an exception is raised by the #process method, the consumer will pause all processing of the message's partition for some number of seconds, configured by setting the pause_timeout configuration variable. This allows the consumer to continue processing messages from other partitions that may not be impacted by the problem while still making sure to not drop the original message. Since messages in a single Kafka topic partition must be processed in order, it's not possible to keep processing other messages in that partition.

In addition to retrying the processing of messages, Racecar also allows defining an error handler callback that is invoked whenever an exception is raised by your #process method. This allows you to track and report errors to a monitoring system:

Racecar.config.on_error do |exception, info|
  MyErrorTracker.report(exception, {
    topic: info[:topic],
    partition: info[:partition],
    offset: info[:offset],
  })
end

It is highly recommended that you set up an error handler. Please note that the info object contains different keys and values depending on whether you are using process or process_batch. See the instrumentation_payload object in the process and process_batch methods in the Runner class for the complete list.

Errors related to Compression

A sample error might look like this:

E, [2022-10-09T11:28:29.976548 #15] ERROR -- : (try 5/10): Error for topic subscription #<struct Racecar::Consumer::Subscription topic="support.entity_incremental.views.view_ticket_ids", start_from_beginning=false, max_bytes_per_partition=104857, additional_config={}>: Local: Not implemented (not_implemented)

Please see Compression

Logging

By default, Racecar will log to STDOUT. If you're using Rails, your application code will use whatever logger you've configured there.

In order to make Racecar log its own operations to a log file, set the logfile configuration variable or pass --log filename.log to the racecar command.

Operations

In order to gracefully shut down a Racecar consumer process, send it the SIGTERM signal. Most process supervisors such as Runit and Kubernetes send this signal when shutting down a process, so using those systems will make things easier.

In order to introspect the configuration of a consumer process, send it the SIGUSR1 signal. This will make Racecar print its configuration to the standard error file descriptor associated with the consumer process, so you'll need to know where that is written to.

Upgrading from v1 to v2

In order to safely upgrade from Racecar v1 to v2, you need to completely shut down your consumer group before starting it up again with the v2 Racecar dependency.

Compression

Racecar v2 requires a C library (zlib) to compress the messages before producing to the topic. If not already installed on you consumer docker container, please install using following command in Dockerfile of consumer

apt-get update && apt-get install -y libzstd-dev

Development

After checking out the repo, run bin/setup to install dependencies. Then, run rspec to run the tests. You can also run bin/console for an interactive prompt that will allow you to experiment.

The integration tests run against a Kafka instance that is not automatically started from within rspec. You can set one up using the provided docker-compose.yml by running docker-compose up.

Running RSpec within Docker

There can be behavioural inconsistencies between running the specs on your machine, and in the CI pipeline. Due to this, there is now a Dockerfile included in the project, which is based on the CircleCI ruby 2.7.8 image. This could easily be extended with more Dockerfiles to cover different Ruby versions if desired. In order to run the specs via Docker:

• Uncomment the tests service from the docker-compose.yml
• Bring up the stack with docker-compose up -d
• Execute the entire suite with docker-compose run --rm tests bundle exec rspec
• Execute a single spec or directory with docker-compose run --rm tests bundle exec rspec spec/integration/consumer_spec.rb

Please note - your code directory is mounted as a volume, so you can make code changes without needing to rebuild

Contributing

Bug reports and pull requests are welcome on GitHub. Feel free to join our Slack team and ask how best to contribute!

Support and Discussion

If you've discovered a bug, please file a Github issue, and make sure to include all the relevant information, including the version of Racecar, rdkafka-ruby, and Kafka that you're using.

If you have other questions, or would like to discuss best practises, or how to contribute to the project, join our Slack team!

Copyright and license

Copyright 2017 Daniel Schierbeck & Zendesk

Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License.

You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.