NAS-123179 / 23.10 / Update Linux kernel to v6.1.40 #98
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
commit 66d8fc0 upstream. The @source inode must be valid. It is even checked via IS_SWAPFILE() above making it pretty clear. So no need to check it when we unlock. What doesn't need to exist is the @target inode. The lock_two_inodes() helper currently swaps the @Inode1 and @inode2 arguments if @Inode1 is NULL to have consistent lock class usage. However, we know that at least for vfs_rename() that @Inode1 is @source and thus is never NULL as per above. We also know that @source is a different inode than @target as that is checked right at the beginning of vfs_rename(). So we know that @source is valid and locked and that @target is locked. So drop the check whether @source is non-NULL. Fixes: 28eceed ("fs: Lock moved directories") Reported-by: kernel test robot <[email protected]> Reported-by: Dan Carpenter <[email protected]> Closes: https://lore.kernel.org/r/[email protected] Message-Id: <[email protected]> [brauner: use commit message from patch I sent concurrently] Signed-off-by: Christian Brauner <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
…immediately commit 03e0add upstream. I've been noticing odd racing behavior in the inodegc code that could only be explained by one cpu adding an inode to its inactivation llist at the same time that another cpu is processing that cpu's llist. Preemption is disabled between get/put_cpu_ptr, so the only explanation is scheduler mayhem. I inserted the following debug code into xfs_inodegc_worker (see the next patch): ASSERT(gc->cpu == smp_processor_id()); This assertion tripped during overnight tests on the arm64 machines, but curiously not on x86_64. I think we haven't observed any resource leaks here because the lockfree list code can handle simultaneous llist_add and llist_del_all functions operating on the same list. However, the whole point of having percpu inodegc lists is to take advantage of warm memory caches by inactivating inodes on the last processor to touch the inode. The incorrect scheduling seems to occur after an inodegc worker is subjected to mod_delayed_work(). This wraps mod_delayed_work_on with WORK_CPU_UNBOUND specified as the cpu number. Unbound allows for scheduling on any cpu, not necessarily the same one that scheduled the work. Because preemption is disabled for as long as we have the gc pointer, I think it's safe to use current_cpu() (aka smp_processor_id) to queue the delayed work item on the correct cpu. Fixes: 7cf2b0f ("xfs: bound maximum wait time for inodegc work") Signed-off-by: Darrick J. Wong <[email protected]> Reviewed-by: Dave Chinner <[email protected]> Signed-off-by: Dave Chinner <[email protected]> Signed-off-by: Amir Goldstein <[email protected]> Acked-by: Darrick J. Wong <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit b37c4c8 upstream. Now that we've allegedly worked out the problem of the per-cpu inodegc workers being scheduled on the wrong cpu, let's put in a debugging knob to let us know if a worker ever gets mis-scheduled again. Signed-off-by: Darrick J. Wong <[email protected]> Reviewed-by: Dave Chinner <[email protected]> Signed-off-by: Dave Chinner <[email protected]> Signed-off-by: Amir Goldstein <[email protected]> Acked-by: Darrick J. Wong <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 2d5f38a upstream. The fscounters scrub code doesn't work properly because it cannot quiesce updates to the percpu counters in the filesystem, hence it returns false corruption reports. This has been fixed properly in one of the online repair patchsets that are under review by replacing the xchk_disable_reaping calls with an exclusive filesystem freeze. Disabling background gc isn't sufficient to fix the problem. In other words, scrub doesn't need to call xfs_inodegc_stop, which is just as well since it wasn't correct to allow scrub to call xfs_inodegc_start when something else could be calling xfs_inodegc_stop (e.g. trying to freeze the filesystem). Neuter the scrubber for now, and remove the xchk_*_reaping functions. Signed-off-by: Darrick J. Wong <[email protected]> Reviewed-by: Dave Chinner <[email protected]> Signed-off-by: Dave Chinner <[email protected]> Signed-off-by: Amir Goldstein <[email protected]> Acked-by: Darrick J. Wong <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 2254a73 upstream. syzbot reported this warning from the faux inodegc shrinker that tries to kick off inodegc work: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 102 at kernel/workqueue.c:1445 __queue_work+0xd44/0x1120 kernel/workqueue.c:1444 RIP: 0010:__queue_work+0xd44/0x1120 kernel/workqueue.c:1444 Call Trace: __queue_delayed_work+0x1c8/0x270 kernel/workqueue.c:1672 mod_delayed_work_on+0xe1/0x220 kernel/workqueue.c:1746 xfs_inodegc_shrinker_scan fs/xfs/xfs_icache.c:2212 [inline] xfs_inodegc_shrinker_scan+0x250/0x4f0 fs/xfs/xfs_icache.c:2191 do_shrink_slab+0x428/0xaa0 mm/vmscan.c:853 shrink_slab+0x175/0x660 mm/vmscan.c:1013 shrink_one+0x502/0x810 mm/vmscan.c:5343 shrink_many mm/vmscan.c:5394 [inline] lru_gen_shrink_node mm/vmscan.c:5511 [inline] shrink_node+0x2064/0x35f0 mm/vmscan.c:6459 kswapd_shrink_node mm/vmscan.c:7262 [inline] balance_pgdat+0xa02/0x1ac0 mm/vmscan.c:7452 kswapd+0x677/0xd60 mm/vmscan.c:7712 kthread+0x2e8/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308 This warning corresponds to this code in __queue_work: /* * For a draining wq, only works from the same workqueue are * allowed. The __WQ_DESTROYING helps to spot the issue that * queues a new work item to a wq after destroy_workqueue(wq). */ if (unlikely(wq->flags & (__WQ_DESTROYING | __WQ_DRAINING) && WARN_ON_ONCE(!is_chained_work(wq)))) return; For this to trip, we must have a thread draining the inodedgc workqueue and a second thread trying to queue inodegc work to that workqueue. This can happen if freezing or a ro remount race with reclaim poking our faux inodegc shrinker and another thread dropping an unlinked O_RDONLY file: Thread 0 Thread 1 Thread 2 xfs_inodegc_stop xfs_inodegc_shrinker_scan xfs_is_inodegc_enabled <yes, will continue> xfs_clear_inodegc_enabled xfs_inodegc_queue_all <list empty, do not queue inodegc worker> xfs_inodegc_queue <add to list> xfs_is_inodegc_enabled <no, returns> drain_workqueue <set WQ_DRAINING> llist_empty <no, will queue list> mod_delayed_work_on(..., 0) __queue_work <sees WQ_DRAINING, kaboom> In other words, everything between the access to inodegc_enabled state and the decision to poke the inodegc workqueue requires some kind of coordination to avoid the WQ_DRAINING state. We could perhaps introduce a lock here, but we could also try to eliminate WQ_DRAINING from the picture. We could replace the drain_workqueue call with a loop that flushes the workqueue and queues workers as long as there is at least one inode present in the per-cpu inodegc llists. We've disabled inodegc at this point, so we know that the number of queued inodes will eventually hit zero as long as xfs_inodegc_start cannot reactivate the workers. There are four callers of xfs_inodegc_start. Three of them come from the VFS with s_umount held: filesystem thawing, failed filesystem freezing, and the rw remount transition. The fourth caller is mounting rw (no remount or freezing possible). There are three callers ofs xfs_inodegc_stop. One is unmounting (no remount or thaw possible). Two of them come from the VFS with s_umount held: fs freezing and ro remount transition. Hence, it is correct to replace the drain_workqueue call with a loop that drains the inodegc llists. Fixes: 6191cf3 ("xfs: flush inodegc workqueue tasks before cancel") Signed-off-by: Darrick J. Wong <[email protected]> Reviewed-by: Dave Chinner <[email protected]> Signed-off-by: Dave Chinner <[email protected]> Signed-off-by: Amir Goldstein <[email protected]> Acked-by: Darrick J. Wong <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
based on commit 0503ea8 upstream. This was inadvertently fixed during the removal of __vma_adjust(). When __vma_adjust() is adjusting next with a negative value (pushing vma->vm_end lower), there would be two writes to the maple tree. The first write is unnecessary and uses all allocated nodes in the maple state. The second write is necessary but will need to allocate nodes since the first write has used the allocated nodes. This may be a problem as it may not be safe to allocate at this time, such as a low memory situation. Fix the issue by avoiding the first write and only write the adjusted "next" VMA. Reported-by: John Hsu <[email protected]> Link: https://lore.kernel.org/lkml/[email protected]/ Cc: [email protected] Cc: [email protected] Signed-off-by: Liam R. Howlett <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit a82796a upstream. During system resume DP MST requires AUX to be working already before the HW state readout of the given encoder. Since AUX requires the encoder/PHY TypeC mode to be initialized, which atm only happens during HW state readout, these AUX transfers can change the TypeC mode incorrectly (disconnecting the PHY for an enabled encoder) and trigger the state check WARNs in intel_tc_port_sanitize(). Fix this by initializing the TypeC mode earlier both during driver loading and system resume and making sure that the mode can't change until the encoder's state is read out. While at it add the missing DocBook comments and rename intel_tc_port_sanitize()->intel_tc_port_sanitize_mode() for consistency. Signed-off-by: Imre Deak <[email protected]> Reviewed-by: Mika Kahola <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 6716572 upstream. An enabled TC MST port holds one TC port link reference, regardless of the number of enabled streams on it, but the TC port HW readout takes one reference for each active MST stream. Fix the HW readout, taking only one reference for MST ports. This didn't cause an actual problem, since the encoder HW readout doesn't yet support reading out the MST HW state. Signed-off-by: Imre Deak <[email protected]> Reviewed-by: Ville Syrjälä <[email protected]> Reviewed-by: Mika Kahola <[email protected]> Reviewed-by: Andrzej Hajda <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 06f6626 upstream. At least restoring the MST topology during system resume needs to use AUX before the display HW readout->sanitization sequence is complete, but on TC ports the PHY may be in the wrong mode for this, resulting in the AUX transfers to fail. The initial TC port mode is kept fixed as BIOS left it for the above HW readout sequence (to prevent changing the mode on an enabled port). If the port is disabled this initial mode is TBT - as in any case the PHY ownership is not held - even if a DP-alt sink is connected. Thus, the AUX transfers during this time will use TBT mode instead of the expected DP-alt mode and so time out. Fix the above by connecting the PHY during port initialization if the port is disabled, which will switch to the expected mode (DP-alt in the above case). As the encoder/pipe HW state isn't read-out yet at this point, check if the port is enabled based on the DDI_BUF enabled flag. Save the read-out initial mode, so intel_tc_port_sanitize_mode() can check this wrt. the read-out encoder HW state. Signed-off-by: Imre Deak <[email protected]> Reviewed-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 085679b upstream. Commit dd5c672 ("arm64: bcmbca: Merge ARCH_BCM4908 to ARCH_BCMBCA") removes config ARCH_BCM4908 as config ARCH_BCMBCA has the same intent. Probably due to concurrent development, commit 002181f ("mtd: parsers: add Broadcom's U-Boot parser") introduces 'Broadcom's U-Boot partition parser' that depends on ARCH_BCM4908, but this use was not visible during the config refactoring from the commit above. Hence, these two changes create a reference to a non-existing config symbol. Adjust the MTD_BRCM_U_BOOT definition to refer to ARCH_BCMBCA instead of ARCH_BCM4908 to remove the reference to the non-existing config symbol ARCH_BCM4908. Signed-off-by: Lukas Bulwahn <[email protected]> Signed-off-by: Miquel Raynal <[email protected]> Link: https://lore.kernel.org/linux-mtd/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
…ails commit 3e70489 upstream. Otherwise a dangling reference to a rule object that is gone remains in the set binding list. Fixes: 26b5a57 ("netfilter: nf_tables: add NFT_TRANS_PREPARE_ERROR to deal with bound set/chain") Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 6eef7a2 upstream. If nf_conntrack_init_start() fails (for example due to a register_nf_conntrack_bpf() failure), the nf_conntrack_helper_fini() clean-up path frees the nf_ct_helper_hash map. When built with NF_CONNTRACK=y, further netfilter modules (e.g: netfilter_conntrack_ftp) can still be loaded and call nf_conntrack_helpers_register(), independently of whether nf_conntrack initialized correctly. This accesses the nf_ct_helper_hash dangling pointer and causes a uaf, possibly leading to random memory corruption. This patch guards nf_conntrack_helper_register() from accessing a freed or uninitialized nf_ct_helper_hash pointer and fixes possible uses-after-free when loading a conntrack module. Cc: [email protected] Fixes: 12f7a50 ("netfilter: add user-space connection tracking helper infrastructure") Signed-off-by: Florent Revest <[email protected]> Reviewed-by: Florian Westphal <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 515ad53 upstream. When adding a rule to a chain referring to its ID, if that chain had been deleted on the same batch, the rule might end up referring to a deleted chain. This will lead to a WARNING like following: [ 33.098431] ------------[ cut here ]------------ [ 33.098678] WARNING: CPU: 5 PID: 69 at net/netfilter/nf_tables_api.c:2037 nf_tables_chain_destroy+0x23d/0x260 [ 33.099217] Modules linked in: [ 33.099388] CPU: 5 PID: 69 Comm: kworker/5:1 Not tainted 6.4.0+ #409 [ 33.099726] Workqueue: events nf_tables_trans_destroy_work [ 33.100018] RIP: 0010:nf_tables_chain_destroy+0x23d/0x260 [ 33.100306] Code: 8b 7c 24 68 e8 64 9c ed fe 4c 89 e7 e8 5c 9c ed fe 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d 31 c0 89 c6 89 c7 c3 cc cc cc cc <0f> 0b 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d 31 c0 89 c6 89 c7 [ 33.101271] RSP: 0018:ffffc900004ffc48 EFLAGS: 00010202 [ 33.101546] RAX: 0000000000000001 RBX: ffff888006fc0a28 RCX: 0000000000000000 [ 33.101920] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 33.102649] RBP: ffffc900004ffc78 R08: 0000000000000000 R09: 0000000000000000 [ 33.103018] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8880135ef500 [ 33.103385] R13: 0000000000000000 R14: dead000000000122 R15: ffff888006fc0a10 [ 33.103762] FS: 0000000000000000(0000) GS:ffff888024c80000(0000) knlGS:0000000000000000 [ 33.104184] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 33.104493] CR2: 00007fe863b56a50 CR3: 00000000124b0001 CR4: 0000000000770ee0 [ 33.104872] PKRU: 55555554 [ 33.104999] Call Trace: [ 33.105113] <TASK> [ 33.105214] ? show_regs+0x72/0x90 [ 33.105371] ? __warn+0xa5/0x210 [ 33.105520] ? nf_tables_chain_destroy+0x23d/0x260 [ 33.105732] ? report_bug+0x1f2/0x200 [ 33.105902] ? handle_bug+0x46/0x90 [ 33.106546] ? exc_invalid_op+0x19/0x50 [ 33.106762] ? asm_exc_invalid_op+0x1b/0x20 [ 33.106995] ? nf_tables_chain_destroy+0x23d/0x260 [ 33.107249] ? nf_tables_chain_destroy+0x30/0x260 [ 33.107506] nf_tables_trans_destroy_work+0x669/0x680 [ 33.107782] ? mark_held_locks+0x28/0xa0 [ 33.107996] ? __pfx_nf_tables_trans_destroy_work+0x10/0x10 [ 33.108294] ? _raw_spin_unlock_irq+0x28/0x70 [ 33.108538] process_one_work+0x68c/0xb70 [ 33.108755] ? lock_acquire+0x17f/0x420 [ 33.108977] ? __pfx_process_one_work+0x10/0x10 [ 33.109218] ? do_raw_spin_lock+0x128/0x1d0 [ 33.109435] ? _raw_spin_lock_irq+0x71/0x80 [ 33.109634] worker_thread+0x2bd/0x700 [ 33.109817] ? __pfx_worker_thread+0x10/0x10 [ 33.110254] kthread+0x18b/0x1d0 [ 33.110410] ? __pfx_kthread+0x10/0x10 [ 33.110581] ret_from_fork+0x29/0x50 [ 33.110757] </TASK> [ 33.110866] irq event stamp: 1651 [ 33.111017] hardirqs last enabled at (1659): [<ffffffffa206a209>] __up_console_sem+0x79/0xa0 [ 33.111379] hardirqs last disabled at (1666): [<ffffffffa206a1ee>] __up_console_sem+0x5e/0xa0 [ 33.111740] softirqs last enabled at (1616): [<ffffffffa1f5d40e>] __irq_exit_rcu+0x9e/0xe0 [ 33.112094] softirqs last disabled at (1367): [<ffffffffa1f5d40e>] __irq_exit_rcu+0x9e/0xe0 [ 33.112453] ---[ end trace 0000000000000000 ]--- This is due to the nft_chain_lookup_byid ignoring the genmask. After this change, adding the new rule will fail as it will not find the chain. Fixes: 837830a ("netfilter: nf_tables: add NFTA_RULE_CHAIN_ID attribute") Cc: [email protected] Reported-by: Mingi Cho of Theori working with ZDI Signed-off-by: Thadeu Lima de Souza Cascardo <[email protected]> Reviewed-by: Florian Westphal <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit caf3ef7 upstream. When evaluating byteorder expressions with size 2, a union with 32-bit and 16-bit members is used. Since the 16-bit members are aligned to 32-bit, the array accesses will be out-of-bounds. It may lead to a stack-out-of-bounds access like the one below: [ 23.095215] ================================================================== [ 23.095625] BUG: KASAN: stack-out-of-bounds in nft_byteorder_eval+0x13c/0x320 [ 23.096020] Read of size 2 at addr ffffc90000007948 by task ping/115 [ 23.096358] [ 23.096456] CPU: 0 PID: 115 Comm: ping Not tainted 6.4.0+ #413 [ 23.096770] Call Trace: [ 23.096910] <IRQ> [ 23.097030] dump_stack_lvl+0x60/0xc0 [ 23.097218] print_report+0xcf/0x630 [ 23.097388] ? nft_byteorder_eval+0x13c/0x320 [ 23.097577] ? kasan_addr_to_slab+0xd/0xc0 [ 23.097760] ? nft_byteorder_eval+0x13c/0x320 [ 23.097949] kasan_report+0xc9/0x110 [ 23.098106] ? nft_byteorder_eval+0x13c/0x320 [ 23.098298] __asan_load2+0x83/0xd0 [ 23.098453] nft_byteorder_eval+0x13c/0x320 [ 23.098659] nft_do_chain+0x1c8/0xc50 [ 23.098852] ? __pfx_nft_do_chain+0x10/0x10 [ 23.099078] ? __kasan_check_read+0x11/0x20 [ 23.099295] ? __pfx___lock_acquire+0x10/0x10 [ 23.099535] ? __pfx___lock_acquire+0x10/0x10 [ 23.099745] ? __kasan_check_read+0x11/0x20 [ 23.099929] nft_do_chain_ipv4+0xfe/0x140 [ 23.100105] ? __pfx_nft_do_chain_ipv4+0x10/0x10 [ 23.100327] ? lock_release+0x204/0x400 [ 23.100515] ? nf_hook.constprop.0+0x340/0x550 [ 23.100779] nf_hook_slow+0x6c/0x100 [ 23.100977] ? __pfx_nft_do_chain_ipv4+0x10/0x10 [ 23.101223] nf_hook.constprop.0+0x334/0x550 [ 23.101443] ? __pfx_ip_local_deliver_finish+0x10/0x10 [ 23.101677] ? __pfx_nf_hook.constprop.0+0x10/0x10 [ 23.101882] ? __pfx_ip_rcv_finish+0x10/0x10 [ 23.102071] ? __pfx_ip_local_deliver_finish+0x10/0x10 [ 23.102291] ? rcu_read_lock_held+0x4b/0x70 [ 23.102481] ip_local_deliver+0xbb/0x110 [ 23.102665] ? __pfx_ip_rcv+0x10/0x10 [ 23.102839] ip_rcv+0x199/0x2a0 [ 23.102980] ? __pfx_ip_rcv+0x10/0x10 [ 23.103140] __netif_receive_skb_one_core+0x13e/0x150 [ 23.103362] ? __pfx___netif_receive_skb_one_core+0x10/0x10 [ 23.103647] ? mark_held_locks+0x48/0xa0 [ 23.103819] ? process_backlog+0x36c/0x380 [ 23.103999] __netif_receive_skb+0x23/0xc0 [ 23.104179] process_backlog+0x91/0x380 [ 23.104350] __napi_poll.constprop.0+0x66/0x360 [ 23.104589] ? net_rx_action+0x1cb/0x610 [ 23.104811] net_rx_action+0x33e/0x610 [ 23.105024] ? _raw_spin_unlock+0x23/0x50 [ 23.105257] ? __pfx_net_rx_action+0x10/0x10 [ 23.105485] ? mark_held_locks+0x48/0xa0 [ 23.105741] __do_softirq+0xfa/0x5ab [ 23.105956] ? __dev_queue_xmit+0x765/0x1c00 [ 23.106193] do_softirq.part.0+0x49/0xc0 [ 23.106423] </IRQ> [ 23.106547] <TASK> [ 23.106670] __local_bh_enable_ip+0xf5/0x120 [ 23.106903] __dev_queue_xmit+0x789/0x1c00 [ 23.107131] ? __pfx___dev_queue_xmit+0x10/0x10 [ 23.107381] ? find_held_lock+0x8e/0xb0 [ 23.107585] ? lock_release+0x204/0x400 [ 23.107798] ? neigh_resolve_output+0x185/0x350 [ 23.108049] ? mark_held_locks+0x48/0xa0 [ 23.108265] ? neigh_resolve_output+0x185/0x350 [ 23.108514] neigh_resolve_output+0x246/0x350 [ 23.108753] ? neigh_resolve_output+0x246/0x350 [ 23.109003] ip_finish_output2+0x3c3/0x10b0 [ 23.109250] ? __pfx_ip_finish_output2+0x10/0x10 [ 23.109510] ? __pfx_nf_hook+0x10/0x10 [ 23.109732] __ip_finish_output+0x217/0x390 [ 23.109978] ip_finish_output+0x2f/0x130 [ 23.110207] ip_output+0xc9/0x170 [ 23.110404] ip_push_pending_frames+0x1a0/0x240 [ 23.110652] raw_sendmsg+0x102e/0x19e0 [ 23.110871] ? __pfx_raw_sendmsg+0x10/0x10 [ 23.111093] ? lock_release+0x204/0x400 [ 23.111304] ? __mod_lruvec_page_state+0x148/0x330 [ 23.111567] ? find_held_lock+0x8e/0xb0 [ 23.111777] ? find_held_lock+0x8e/0xb0 [ 23.111993] ? __rcu_read_unlock+0x7c/0x2f0 [ 23.112225] ? aa_sk_perm+0x18a/0x550 [ 23.112431] ? filemap_map_pages+0x4f1/0x900 [ 23.112665] ? __pfx_aa_sk_perm+0x10/0x10 [ 23.112880] ? find_held_lock+0x8e/0xb0 [ 23.113098] inet_sendmsg+0xa0/0xb0 [ 23.113297] ? inet_sendmsg+0xa0/0xb0 [ 23.113500] ? __pfx_inet_sendmsg+0x10/0x10 [ 23.113727] sock_sendmsg+0xf4/0x100 [ 23.113924] ? move_addr_to_kernel.part.0+0x4f/0xa0 [ 23.114190] __sys_sendto+0x1d4/0x290 [ 23.114391] ? __pfx___sys_sendto+0x10/0x10 [ 23.114621] ? __pfx_mark_lock.part.0+0x10/0x10 [ 23.114869] ? lock_release+0x204/0x400 [ 23.115076] ? find_held_lock+0x8e/0xb0 [ 23.115287] ? rcu_is_watching+0x23/0x60 [ 23.115503] ? __rseq_handle_notify_resume+0x6e2/0x860 [ 23.115778] ? __kasan_check_write+0x14/0x30 [ 23.116008] ? blkcg_maybe_throttle_current+0x8d/0x770 [ 23.116285] ? mark_held_locks+0x28/0xa0 [ 23.116503] ? do_syscall_64+0x37/0x90 [ 23.116713] __x64_sys_sendto+0x7f/0xb0 [ 23.116924] do_syscall_64+0x59/0x90 [ 23.117123] ? irqentry_exit_to_user_mode+0x25/0x30 [ 23.117387] ? irqentry_exit+0x77/0xb0 [ 23.117593] ? exc_page_fault+0x92/0x140 [ 23.117806] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 23.118081] RIP: 0033:0x7f744aee2bba [ 23.118282] Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89 [ 23.119237] RSP: 002b:00007ffd04a7c9f8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c [ 23.119644] RAX: ffffffffffffffda RBX: 00007ffd04a7e0a0 RCX: 00007f744aee2bba [ 23.120023] RDX: 0000000000000040 RSI: 000056488e9e6300 RDI: 0000000000000003 [ 23.120413] RBP: 000056488e9e6300 R08: 00007ffd04a80320 R09: 0000000000000010 [ 23.120809] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000040 [ 23.121219] R13: 00007ffd04a7dc38 R14: 00007ffd04a7ca00 R15: 00007ffd04a7e0a0 [ 23.121617] </TASK> [ 23.121749] [ 23.121845] The buggy address belongs to the virtual mapping at [ 23.121845] [ffffc90000000000, ffffc90000009000) created by: [ 23.121845] irq_init_percpu_irqstack+0x1cf/0x270 [ 23.122707] [ 23.122803] The buggy address belongs to the physical page: [ 23.123104] page:0000000072ac19f0 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x24a09 [ 23.123609] flags: 0xfffffc0001000(reserved|node=0|zone=1|lastcpupid=0x1fffff) [ 23.123998] page_type: 0xffffffff() [ 23.124194] raw: 000fffffc0001000 ffffea0000928248 ffffea0000928248 0000000000000000 [ 23.124610] raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 [ 23.125023] page dumped because: kasan: bad access detected [ 23.125326] [ 23.125421] Memory state around the buggy address: [ 23.125682] ffffc90000007800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 23.126072] ffffc90000007880: 00 00 00 00 00 f1 f1 f1 f1 f1 f1 00 00 f2 f2 00 [ 23.126455] >ffffc90000007900: 00 00 00 00 00 00 00 00 00 f2 f2 f2 f2 00 00 00 [ 23.126840] ^ [ 23.127138] ffffc90000007980: 00 00 00 00 00 00 00 00 00 00 00 00 00 f3 f3 f3 [ 23.127522] ffffc90000007a00: f3 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 [ 23.127906] ================================================================== [ 23.128324] Disabling lock debugging due to kernel taint Using simple s16 pointers for the 16-bit accesses fixes the problem. For the 32-bit accesses, src and dst can be used directly. Fixes: 9651851 ("netfilter: add nftables") Cc: [email protected] Reported-by: Tanguy DUBROCA (@SidewayRE) from @synacktiv working with ZDI Signed-off-by: Thadeu Lima de Souza Cascardo <[email protected]> Reviewed-by: Florian Westphal <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 7387943 upstream. Using `% nr_cpumask_bits` is slow and complicated, and not totally robust toward dynamic changes to CPU topologies. Rather than storing the next CPU in the round-robin, just store the last one, and also return that value. This simplifies the loop drastically into a much more common pattern. Fixes: e7096c1 ("net: WireGuard secure network tunnel") Cc: [email protected] Reported-by: Linus Torvalds <[email protected]> Tested-by: Manuel Leiner <[email protected]> Signed-off-by: Jason A. Donenfeld <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit f58d0a9 upstream. Packets bound for peers can queue up prior to the device private key being set. For example, if persistent keepalive is set, a packet is queued up to be sent as soon as the device comes up. However, if the private key hasn't been set yet, the handshake message never sends, and no timer is armed to retry, since that would be pointless. But, if a user later sets a private key, the expectation is that those queued packets, such as a persistent keepalive, are actually sent. So adjust the configuration logic to account for this edge case, and add a test case to make sure this works. Maxim noticed this with a wg-quick(8) config to the tune of: [Interface] PostUp = wg set %i private-key somefile [Peer] PublicKey = ... Endpoint = ... PersistentKeepalive = 25 Here, the private key gets set after the device comes up using a PostUp script, triggering the bug. Fixes: e7096c1 ("net: WireGuard secure network tunnel") Cc: [email protected] Reported-by: Maxim Cournoyer <[email protected]> Tested-by: Maxim Cournoyer <[email protected]> Link: https://lore.kernel.org/wireguard/[email protected]/ Signed-off-by: Jason A. Donenfeld <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit e0edfdc upstream. Add earlycon support for imx8ulp platform. Signed-off-by: Sherry Sun <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 7eb1e47 upstream. Making 'blk' sector_t (i.e. 64 bit if LBD support is active) fails the 'blk>0' test in the partition block loop if a value of (signed int) -1 is used to mark the end of the partition block list. Explicitly cast 'blk' to signed int to allow use of -1 to terminate the partition block linked list. Fixes: b6f3f28 ("block: add overflow checks for Amiga partition support") Reported-by: Christian Zigotzky <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Michael Schmitz <[email protected]> Reviewed-by: Martin Steigerwald <[email protected]> Tested-by: Christian Zigotzky <[email protected]> Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit ab8aa4f upstream. When booting rts7751r2dplus_defconfig on QEMU, the system hangs due to an interrupt storm on IRQ 20. IRQ 20 aka event 0x280 is a cascaded IRL interrupt, which maps to IRQ_VOYAGER, the interrupt used by the Silicon Motion SM501 multimedia companion chip. As rts7751r2d_irq_demux() does not take into account the new virq offset, the interrupt is no longer translated, leading to an unhandled interrupt. Fix this by taking into account the virq offset when translating cascaded IRL interrupts. Fixes: a8ac296 ("sh: Avoid using IRQ0 on SH3 and SH4") Reported-by: Guenter Roeck <[email protected]> Closes: https://lore.kernel.org/r/[email protected] Signed-off-by: Geert Uytterhoeven <[email protected]> Reviewed-by: John Paul Adrian Glaubitz <[email protected]> Tested-by: John Paul Adrian Glaubitz <[email protected]> Tested-by: Guenter Roeck <[email protected]> Link: https://lore.kernel.org/r/2c99d5df41c40691f6c407b7b6a040d406bc81ac.1688901306.git.geert+renesas@glider.be Signed-off-by: John Paul Adrian Glaubitz <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit a2601b8 upstream. Take into account the virq offset when translating cascaded IRL interrupts. Fixes: a8ac296 ("sh: Avoid using IRQ0 on SH3 and SH4") Signed-off-by: Geert Uytterhoeven <[email protected]> Reviewed-by: John Paul Adrian Glaubitz <[email protected]> Link: https://lore.kernel.org/r/4fcb0d08a2b372431c41e04312742dc9e41e1be4.1688908186.git.geert+renesas@glider.be Signed-off-by: John Paul Adrian Glaubitz <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 3d20f7a upstream. Take into account the virq offset when translating cascaded interrupts. Fixes: a8ac296 ("sh: Avoid using IRQ0 on SH3 and SH4") Signed-off-by: Geert Uytterhoeven <[email protected]> Reviewed-by: John Paul Adrian Glaubitz <[email protected]> Link: https://lore.kernel.org/r/7d0cb246c9f1cd24bb1f637ec5cb67e799a4c3b8.1688908227.git.geert+renesas@glider.be Signed-off-by: John Paul Adrian Glaubitz <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 7c28a35 upstream. A recent change to start counting SuperH IRQ #s from 16 breaks support for the Hitachi HD64461 companion chip. Move the offchip IRQ base and HD64461 IRQ # by 16 in order to accommodate for the new virq numbering rules. Fixes: a8ac296 ("sh: Avoid using IRQ0 on SH3 and SH4") Signed-off-by: Artur Rojek <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> Reviewed-by: John Paul Adrian Glaubitz <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: John Paul Adrian Glaubitz <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Commit 8a79656 upstream. I observed poor performance of io_uring compared to synchronous IO. That turns out to be caused by deeper CPU idle states entered with io_uring, due to io_uring using plain schedule(), whereas synchronous IO uses io_schedule(). The losses due to this are substantial. On my cascade lake workstation, t/io_uring from the fio repository e.g. yields regressions between 20% and 40% with the following command: ./t/io_uring -r 5 -X0 -d 1 -s 1 -c 1 -p 0 -S$use_sync -R 0 /mnt/t2/fio/write.0.0 This is repeatable with different filesystems, using raw block devices and using different block devices. Use io_schedule_prepare() / io_schedule_finish() in io_cqring_wait_schedule() to address the difference. After that using io_uring is on par or surpassing synchronous IO (using registered files etc makes it reliably win, but arguably is a less fair comparison). There are other calls to schedule() in io_uring/, but none immediately jump out to be similarly situated, so I did not touch them. Similarly, it's possible that mutex_lock_io() should be used, but it's not clear if there are cases where that matters. Cc: [email protected] # 5.10+ Cc: Pavel Begunkov <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Andres Freund <[email protected]> Link: https://lore.kernel.org/r/[email protected] [axboe: minor style fixup] Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Link: https://lore.kernel.org/r/[email protected] Tested-by: Takeshi Ogasawara <[email protected]> Tested-by: Conor Dooley <[email protected]> Tested-by: Shuah Khan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Link: https://lore.kernel.org/r/[email protected] Tested-by: Takeshi Ogasawara <[email protected]> Tested-by: Bagas Sanjaya <[email protected]> Tested-by: Jon Hunter <[email protected]> Tested-by: Chris Paterson (CIP) <[email protected]> Tested-by: Ron Economos <[email protected]> Tested-by: Guenter Roeck <[email protected]> Tested-by: Joel Fernandes (Google) <[email protected]> Tested-by: Allen Pais <[email protected]> Tested-by: SeongJae Park <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit c1685a8 upstream. As float32 is also used in other places as a data type, it is necessary to rename the float32 variable in order to avoid confusion. Cc: [email protected] Tested-by: Kai-Heng Feng <[email protected]> Signed-off-by: Basavaraj Natikar <[email protected]> Signed-off-by: Akshata MukundShetty <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Benjamin Tissoires <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 8785436 upstream. Shift operation of 'exp' and 'shift' variables exceeds the maximum number of shift values in the u32 range leading to UBSAN shift-out-of-bounds. ... [ 6.120512] UBSAN: shift-out-of-bounds in drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_desc.c:149:50 [ 6.120598] shift exponent 104 is too large for 64-bit type 'long unsigned int' [ 6.120659] CPU: 4 PID: 96 Comm: kworker/4:1 Not tainted 6.4.0amd_1-next-20230519-dirty #10 [ 6.120665] Hardware name: AMD Birman-PHX/Birman-PHX, BIOS SFH_with_HPD_SEN.FD 04/05/2023 [ 6.120667] Workqueue: events amd_sfh_work_buffer [amd_sfh] [ 6.120687] Call Trace: [ 6.120690] <TASK> [ 6.120694] dump_stack_lvl+0x48/0x70 [ 6.120704] dump_stack+0x10/0x20 [ 6.120707] ubsan_epilogue+0x9/0x40 [ 6.120716] __ubsan_handle_shift_out_of_bounds+0x10f/0x170 [ 6.120720] ? psi_group_change+0x25f/0x4b0 [ 6.120729] float_to_int.cold+0x18/0xba [amd_sfh] [ 6.120739] get_input_rep+0x57/0x340 [amd_sfh] [ 6.120748] ? __schedule+0xba7/0x1b60 [ 6.120756] ? __pfx_get_input_rep+0x10/0x10 [amd_sfh] [ 6.120764] amd_sfh_work_buffer+0x91/0x180 [amd_sfh] [ 6.120772] process_one_work+0x229/0x430 [ 6.120780] worker_thread+0x4a/0x3c0 [ 6.120784] ? __pfx_worker_thread+0x10/0x10 [ 6.120788] kthread+0xf7/0x130 [ 6.120792] ? __pfx_kthread+0x10/0x10 [ 6.120795] ret_from_fork+0x29/0x50 [ 6.120804] </TASK> ... Fix this by adding the condition to validate shift ranges. Fixes: 93ce5e0 ("HID: amd_sfh: Implement SFH1.1 functionality") Cc: [email protected] Tested-by: Kai-Heng Feng <[email protected]> Signed-off-by: Basavaraj Natikar <[email protected]> Signed-off-by: Akshata MukundShetty <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Benjamin Tissoires <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 7a8227b upstream. dev_set_rx_mode() grabs a spin_lock, and the lan743x implementation proceeds subsequently to go to sleep using readx_poll_timeout(). Introduce a helper wrapping the readx_poll_timeout_atomic() function and use it to replace the calls to readx_polL_timeout(). Fixes: 23f0703 ("lan743x: Add main source files for new lan743x driver") Cc: [email protected] Cc: Bryan Whitehead <[email protected]> Cc: [email protected] Signed-off-by: Moritz Fischer <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit afa4bb7 upstream. Dave Airlie reports that gcc-13.1.1 has started complaining about some of the workqueue code in 32-bit arm builds: kernel/workqueue.c: In function ‘get_work_pwq’: kernel/workqueue.c:713:24: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] 713 | return (void *)(data & WORK_STRUCT_WQ_DATA_MASK); | ^ [ ... a couple of other cases ... ] and while it's not immediately clear exactly why gcc started complaining about it now, I suspect it's some C23-induced enum type handlign fixup in gcc-13 is the cause. Whatever the reason for starting to complain, the code and data types are indeed disgusting enough that the complaint is warranted. The wq code ends up creating various "helper constants" (like that WORK_STRUCT_WQ_DATA_MASK) using an enum type, which is all kinds of confused. The mask needs to be 'unsigned long', not some unspecified enum type. To make matters worse, the actual "mask and cast to a pointer" is repeated a couple of times, and the cast isn't even always done to the right pointer, but - as the error case above - to a 'void *' with then the compiler finishing the job. That's now how we roll in the kernel. So create the masks using the proper types rather than some ambiguous enumeration, and use a nice helper that actually does the type conversion in one well-defined place. Incidentally, this magically makes clang generate better code. That, admittedly, is really just a sign of clang having been seriously confused before, and cleaning up the typing unconfuses the compiler too. Reported-by: Dave Airlie <[email protected]> Link: https://lore.kernel.org/lkml/CAPM=9twNnV4zMCvrPkw3H-ajZOH-01JVh_kDrxdPYQErz8ZTdA@mail.gmail.com/ Cc: Arnd Bergmann <[email protected]> Cc: Tejun Heo <[email protected]> Cc: Nick Desaulniers <[email protected]> Cc: Nathan Chancellor <[email protected]> Signed-off-by: Linus Torvalds <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 7b7d709 upstream. This patch add the compound request handling to the some commands. Existing clients do not send these commands as compound requests, but ksmbd should consider that they may come. Cc: [email protected] Signed-off-by: Namjae Jeon <[email protected]> Signed-off-by: Steve French <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 98422bd upstream. ksmbd does not consider the case of that smb2 session setup is in compound request. If this is the second payload of the compound, OOB read issue occurs while processing the first payload in the smb2_sess_setup(). Cc: [email protected] Reported-by: [email protected] # ZDI-CAN-21355 Signed-off-by: Namjae Jeon <[email protected]> Signed-off-by: Steve French <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit b843add upstream. System crash, where driver is accessing scsi layer's memory (scsi_cmnd->device->host) to search for a well known internal pointer (vha). The scsi_cmnd was released back to upper layer which could be freed, but the driver is still accessing it. 7 [ffffa8e8d2c3f8d0] page_fault at ffffffff86c010fe [exception RIP: __qla2x00_eh_wait_for_pending_commands+240] RIP: ffffffffc0642350 RSP: ffffa8e8d2c3f988 RFLAGS: 00010286 RAX: 0000000000000165 RBX: 0000000000000002 RCX: 00000000000036d8 RDX: 0000000000000000 RSI: ffff9c5c56535188 RDI: 0000000000000286 RBP: ffff9c5bf7aa4a58 R8: ffff9c589aecdb70 R9: 00000000000003d1 R10: 0000000000000001 R11: 0000000000380000 R12: ffff9c5c5392bc78 R13: ffff9c57044ff5c0 R14: ffff9c56b5a3aa00 R15: 00000000000006db ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 8 [ffffa8e8d2c3f9c8] qla2x00_eh_wait_for_pending_commands at ffffffffc0646dd5 [qla2xxx] 9 [ffffa8e8d2c3fa00] __qla2x00_async_tm_cmd at ffffffffc0658094 [qla2xxx] Remove access of freed memory. Currently the driver was checking to see if scsi_done was called by seeing if the sp->type has changed. Instead, check to see if the command has left the oustanding_cmds[] array as sign of scsi_done was called. Cc: [email protected] Signed-off-by: Quinn Tran <[email protected]> Signed-off-by: Nilesh Javali <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Himanshu Madhani <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit d721b59 upstream. Klocwork reports array 'vha->host_str' of size 16 may use index value(s) 16..19. Use snprintf() instead of sprintf(). Cc: [email protected] Co-developed-by: Bikash Hazarika <[email protected]> Signed-off-by: Bikash Hazarika <[email protected]> Signed-off-by: Nilesh Javali <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Himanshu Madhani <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 6b504d0 upstream. Klocwork reported warning of NULL pointer may be dereferenced. The routine exits when sa_ctl is NULL and fcport is allocated after the exit call thus causing NULL fcport pointer to dereference at the time of exit. To avoid fcport pointer dereference, exit the routine when sa_ctl is NULL. Cc: [email protected] Signed-off-by: Nilesh Javali <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Himanshu Madhani <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit b68710a upstream. Klocwork warning: Buffer Overflow - Array Index Out of Bounds Driver uses fc_els_flogi to calculate size of buffer. The actual buffer is nested inside of fc_els_flogi which is smaller. Replace structure name to allow proper size calculation. Cc: [email protected] Signed-off-by: Quinn Tran <[email protected]> Signed-off-by: Nilesh Javali <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Himanshu Madhani <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 464ea49 upstream. Klocwork tool reported 'cur_dsd' may be dereferenced. Add fix to validate pointer before dereferencing the pointer. Cc: [email protected] Signed-off-by: Bikash Hazarika <[email protected]> Signed-off-by: Nilesh Javali <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Himanshu Madhani <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit af73f23 upstream. Klocwork reported warning of rport maybe NULL and will be dereferenced. rport returned by call to fc_bsg_to_rport() could be NULL and dereferenced. Check valid rport returned by fc_bsg_to_rport(). Cc: [email protected] Signed-off-by: Nilesh Javali <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Himanshu Madhani <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit b1b9d38 upstream. Klocwork reported array 'port_dstate_str' of size 10 may use index value(s) 10..15. Add a fix to correct the index of array. Cc: [email protected] Signed-off-by: Bikash Hazarika <[email protected]> Signed-off-by: Nilesh Javali <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Himanshu Madhani <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 00eca15 upstream. Klocwork tool reported pointer 'rport' returned from call to function fc_bsg_to_rport() may be NULL and will be dereferenced. Add a fix to validate rport before dereferencing. Cc: [email protected] Signed-off-by: Shreyas Deodhar <[email protected]> Signed-off-by: Nilesh Javali <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Himanshu Madhani <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 20fce50 upstream. System crash when qla2x00_start_sp(sp) returns error code EGAIN and wake_up gets called for uninitialized wait queue sp->nvme_ls_waitq. qla2xxx [0000:37:00.1]-2121:5: Returning existing qpair of ffff8ae2c0513400 for idx=0 qla2xxx [0000:37:00.1]-700e:5: qla2x00_start_sp failed = 11 BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI Hardware name: HPE ProLiant DL360 Gen10/ProLiant DL360 Gen10, BIOS U32 09/03/2021 Workqueue: nvme-wq nvme_fc_connect_ctrl_work [nvme_fc] RIP: 0010:__wake_up_common+0x4c/0x190 RSP: 0018:ffff95f3e0cb7cd0 EFLAGS: 00010086 RAX: 0000000000000000 RBX: ffff8b08d3b26328 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000003 RDI: ffff8b08d3b26320 RBP: 0000000000000001 R08: 0000000000000000 R09: ffffffffffffffe8 R10: 0000000000000000 R11: ffff95f3e0cb7a60 R12: ffff95f3e0cb7d20 R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8b2fdf6c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000002f1e410002 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: __wake_up_common_lock+0x7c/0xc0 qla_nvme_ls_req+0x355/0x4c0 [qla2xxx] ? __nvme_fc_send_ls_req+0x260/0x380 [nvme_fc] ? nvme_fc_send_ls_req.constprop.42+0x1a/0x45 [nvme_fc] ? nvme_fc_connect_ctrl_work.cold.63+0x1e3/0xa7d [nvme_fc] Remove unused nvme_ls_waitq wait queue. nvme_ls_waitq logic was removed previously in the commits tagged Fixed: below. Fixes: 219d27d ("scsi: qla2xxx: Fix race conditions in the code for aborting SCSI commands") Fixes: 5621b0d ("scsi: qla2xxx: Simpify unregistration of FC-NVMe local/remote ports") Cc: [email protected] Signed-off-by: Manish Rangankar <[email protected]> Signed-off-by: Nilesh Javali <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 3390200 upstream. This loop will exit successfully when "found" is false or in the failure case it times out with "wait_iter" set to -1. The test for timeouts is impossible as is. Fixes: b843add ("scsi: qla2xxx: Fix mem access after free") Signed-off-by: Dan Carpenter <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 3a6dbb6 upstream. Commit e4de205 ("MIPS: KVM: Fix NULL pointer dereference") missed converting one place accessing cop0 registers, which results in a build error, if KVM_MIPS_DEBUG_COP0_COUNTERS is enabled. Fixes: e4de205 ("MIPS: KVM: Fix NULL pointer dereference") Signed-off-by: Thomas Bogendoerfer <[email protected]> Reviewed-by: Philippe Mathieu-Daudé <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 1e66a17 upstream. This reverts commit 072030b. This is no longer necessary when using newer DMUB F/W. Cc: [email protected] Cc: Sean Wang <[email protected]> Cc: Marc Rossi <[email protected]> Cc: Hamza Mahfooz <[email protected]> Cc: Tsung-hua (Ryan) Lin <[email protected]> Reviewed-by: Leo Li <[email protected]> Signed-off-by: Mario Limonciello <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 9b07d27 upstream. swiotlb_memblock_alloc() calls memblock_alloc(), which calls (__init) memblock_alloc_try_nid(). However, swiotlb_membloc_alloc() can be marked as __init since it is only called by swiotlb_init_remap(), which is already marked as __init. This prevents a modpost build warning/error: WARNING: modpost: vmlinux.o: section mismatch in reference: swiotlb_memblock_alloc (section: .text) -> memblock_alloc_try_nid (section: .init.text) WARNING: modpost: vmlinux.o: section mismatch in reference: swiotlb_memblock_alloc (section: .text) -> memblock_alloc_try_nid (section: .init.text) This fixes the build warning/error seen on ARM64, PPC64, S390, i386, and x86_64. Fixes: 8d58aa4 ("swiotlb: reduce the swiotlb buffer size on allocation failure") Signed-off-by: Randy Dunlap <[email protected]> Cc: Alexey Kardashevskiy <[email protected]> Cc: Christoph Hellwig <[email protected]> Cc: [email protected] Cc: Mike Rapoport <[email protected]> Cc: [email protected] Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 158810b upstream. 2536989 deletes a check for the case where no 'lmax' is specified which 3037933 previously fixed as 'lmax' could be set to the device's MTU without any bound checking for QFQ_LMAX_MIN and QFQ_LMAX_MAX. Therefore, reintroduce the check. Fixes: 2536989 ("net/sched: sch_qfq: refactor parsing of netlink parameters") Acked-by: Jamal Hadi Salim <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Signed-off-by: Pedro Tammela <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 4e076c7 upstream. This requires a bit of background. Properly done a modeset driver's unload/remove sequence should be drm_dev_unplug(); drm_atomic_helper_shutdown(); drm_dev_put(); The trouble is that the drm_dev_unplugged() checks are by design racy, they do not synchronize against all outstanding ioctl. This is because those ioctl could block forever (both for modeset and for driver specific ioctls), leading to deadlocks in hotunplug. Instead the code sections that touch the hardware need to be annotated with drm_dev_enter/exit, to avoid accessing hardware resources after the unload/remove has finished. To avoid use-after-free issues all the involved userspace visible objects are supposed to hold a reference on the underlying drm_device, like drm_file does. The issue now is that we missed one, the atomic modeset ioctl can be run in a nonblocking fashion, and in that case it cannot rely on the implied drm_device reference provided by the ioctl calling context. This can result in a use-after-free if an nonblocking atomic commit is carefully raced against a driver unload. Fix this by unconditionally grabbing a drm_device reference for any drm_atomic_state structures. Strictly speaking this isn't required for blocking commits and TEST_ONLY calls, but it's the simpler approach. Thanks to shanzhulig for the initial idea of grabbing an unconditional reference, I just added comments, a condensed commit message and fixed a minor potential issue in where exactly we drop the final reference. Reported-by: shanzhulig <[email protected]> Suggested-by: shanzhulig <[email protected]> Reviewed-by: Maxime Ripard <[email protected]> Cc: Maarten Lankhorst <[email protected]> Cc: Thomas Zimmermann <[email protected]> Cc: David Airlie <[email protected]> Cc: [email protected] Signed-off-by: Daniel Vetter <[email protected]> Signed-off-by: Daniel Vetter <[email protected]> Signed-off-by: Linus Torvalds <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 74b449b upstream. Make the one Get Mac Address function for all manufacturers and change this call in handlers accordingly. Reviewed-by: Simon Horman <[email protected]> Signed-off-by: Ivan Mikhaylov <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
commit 7900713 upstream. Change ndo_set_mac_address to dev_set_mac_address because dev_set_mac_address provides a way to notify network layer about MAC change. In other case, services may not aware about MAC change and keep using old one which set from network adapter driver. As example, DHCP client from systemd do not update MAC address without notification from net subsystem which leads to the problem with acquiring the right address from DHCP server. Fixes: cb10c7c ("net/ncsi: Add NCSI Broadcom OEM command") Cc: [email protected] # v6.0+ 2f38e84 net/ncsi: make one oem_gma function for all mfr id Signed-off-by: Paul Fertser <[email protected]> Signed-off-by: Ivan Mikhaylov <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Link: https://lore.kernel.org/r/[email protected] Tested-by: SeongJae Park <[email protected]> Tested-by: Takeshi Ogasawara <[email protected]> Tested-by: Florian Fainelli <[email protected]> Tested-by: Bagas Sanjaya <[email protected]> Tested-by: Linux Kernel Functional Testing <[email protected]> Tested-by: Ron Economos <[email protected]> Tested-by: Guenter Roeck <[email protected]> Tested-by: Jon Hunter <[email protected]> Tested-by: Conor Dooley <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
This is the 6.1.40 stable release Signed-off-by: Umer Saleem <[email protected]>
Signed-off-by: Umer Saleem <[email protected]>
ixhamza
approved these changes
Jul 25, 2023
amotin
approved these changes
Jul 25, 2023
wongsyrone
pushed a commit
to wongsyrone/truenas-scale-linux
that referenced
this pull request
May 3, 2024
[ Upstream commit 244296c ] There are several places where either chan->lock or chan->vchan.lock was not held. Add appropriate locking. This fixes lockdep warnings like [ 31.077578] ------------[ cut here ]------------ [ 31.077831] WARNING: CPU: 2 PID: 40 at drivers/dma/xilinx/xilinx_dpdma.c:834 xilinx_dpdma_chan_queue_transfer+0x274/0x5e0 [ 31.077953] Modules linked in: [ 31.078019] CPU: 2 PID: 40 Comm: kworker/u12:1 Not tainted 6.6.20+ truenas#98 [ 31.078102] Hardware name: xlnx,zynqmp (DT) [ 31.078169] Workqueue: events_unbound deferred_probe_work_func [ 31.078272] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 31.078377] pc : xilinx_dpdma_chan_queue_transfer+0x274/0x5e0 [ 31.078473] lr : xilinx_dpdma_chan_queue_transfer+0x270/0x5e0 [ 31.078550] sp : ffffffc083bb2e10 [ 31.078590] x29: ffffffc083bb2e10 x28: 0000000000000000 x27: ffffff880165a168 [ 31.078754] x26: ffffff880164e920 x25: ffffff880164eab8 x24: ffffff880164d480 [ 31.078920] x23: ffffff880165a148 x22: ffffff880164e988 x21: 0000000000000000 [ 31.079132] x20: ffffffc082aa3000 x19: ffffff880164e880 x18: 0000000000000000 [ 31.079295] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 [ 31.079453] x14: 0000000000000000 x13: ffffff8802263dc0 x12: 0000000000000001 [ 31.079613] x11: 0001ffc083bb2e34 x10: 0001ff880164e98f x9 : 0001ffc082aa3def [ 31.079824] x8 : 0001ffc082aa3dec x7 : 0000000000000000 x6 : 0000000000000516 [ 31.079982] x5 : ffffffc7f8d43000 x4 : ffffff88003c9c40 x3 : ffffffffffffffff [ 31.080147] x2 : ffffffc7f8d43000 x1 : 00000000000000c0 x0 : 0000000000000000 [ 31.080307] Call trace: [ 31.080340] xilinx_dpdma_chan_queue_transfer+0x274/0x5e0 [ 31.080518] xilinx_dpdma_issue_pending+0x11c/0x120 [ 31.080595] zynqmp_disp_layer_update+0x180/0x3ac [ 31.080712] zynqmp_dpsub_plane_atomic_update+0x11c/0x21c [ 31.080825] drm_atomic_helper_commit_planes+0x20c/0x684 [ 31.080951] drm_atomic_helper_commit_tail+0x5c/0xb0 [ 31.081139] commit_tail+0x234/0x294 [ 31.081246] drm_atomic_helper_commit+0x1f8/0x210 [ 31.081363] drm_atomic_commit+0x100/0x140 [ 31.081477] drm_client_modeset_commit_atomic+0x318/0x384 [ 31.081634] drm_client_modeset_commit_locked+0x8c/0x24c [ 31.081725] drm_client_modeset_commit+0x34/0x5c [ 31.081812] __drm_fb_helper_restore_fbdev_mode_unlocked+0x104/0x168 [ 31.081899] drm_fb_helper_set_par+0x50/0x70 [ 31.081971] fbcon_init+0x538/0xc48 [ 31.082047] visual_init+0x16c/0x23c [ 31.082207] do_bind_con_driver.isra.0+0x2d0/0x634 [ 31.082320] do_take_over_console+0x24c/0x33c [ 31.082429] do_fbcon_takeover+0xbc/0x1b0 [ 31.082503] fbcon_fb_registered+0x2d0/0x34c [ 31.082663] register_framebuffer+0x27c/0x38c [ 31.082767] __drm_fb_helper_initial_config_and_unlock+0x5c0/0x91c [ 31.082939] drm_fb_helper_initial_config+0x50/0x74 [ 31.083012] drm_fbdev_dma_client_hotplug+0xb8/0x108 [ 31.083115] drm_client_register+0xa0/0xf4 [ 31.083195] drm_fbdev_dma_setup+0xb0/0x1cc [ 31.083293] zynqmp_dpsub_drm_init+0x45c/0x4e0 [ 31.083431] zynqmp_dpsub_probe+0x444/0x5e0 [ 31.083616] platform_probe+0x8c/0x13c [ 31.083713] really_probe+0x258/0x59c [ 31.083793] __driver_probe_device+0xc4/0x224 [ 31.083878] driver_probe_device+0x70/0x1c0 [ 31.083961] __device_attach_driver+0x108/0x1e0 [ 31.084052] bus_for_each_drv+0x9c/0x100 [ 31.084125] __device_attach+0x100/0x298 [ 31.084207] device_initial_probe+0x14/0x20 [ 31.084292] bus_probe_device+0xd8/0xdc [ 31.084368] deferred_probe_work_func+0x11c/0x180 [ 31.084451] process_one_work+0x3ac/0x988 [ 31.084643] worker_thread+0x398/0x694 [ 31.084752] kthread+0x1bc/0x1c0 [ 31.084848] ret_from_fork+0x10/0x20 [ 31.084932] irq event stamp: 64549 [ 31.084970] hardirqs last enabled at (64548): [<ffffffc081adf35c>] _raw_spin_unlock_irqrestore+0x80/0x90 [ 31.085157] hardirqs last disabled at (64549): [<ffffffc081adf010>] _raw_spin_lock_irqsave+0xc0/0xdc [ 31.085277] softirqs last enabled at (64503): [<ffffffc08001071c>] __do_softirq+0x47c/0x500 [ 31.085390] softirqs last disabled at (64498): [<ffffffc080017134>] ____do_softirq+0x10/0x1c [ 31.085501] ---[ end trace 0000000000000000 ]--- Fixes: 7cbb0c6 ("dmaengine: xilinx: dpdma: Add the Xilinx DisplayPort DMA engine driver") Signed-off-by: Sean Anderson <[email protected]> Reviewed-by: Tomi Valkeinen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
This is the 6.1.40 stable release.
Tested by building a Cobia image with updated kernel, installing and booting the image. No new errors or warnings observed in dmesg logs.