Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

New repository address added. #20

Open
wants to merge 1 commit into
base: master
Choose a base branch
from
Open

New repository address added. #20

Changes from all commits
Commits
Show all changes
1 commit
Select commit
File filter

Filter by extension

Filter by extension
Conversations
Failed to load comments.
Loading
Jump to
Jump to file
Failed to load files.
Loading
Diff view
Diff view
12 changes: 7 additions & 5 deletions README.md
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -4,6 +4,8 @@ Please note this repository is deprecated, and the code is not up-to-date to use

This repository will not be further maintained. Please find another repository if you want to deploy a single channel gateway.

This repository can be considered onwards: https://github.com/futuritymmx/Single-Channel-LoRaWAN-Gateway


Single Channel LoRaWAN Gateway
==============================
Expand All @@ -13,10 +15,10 @@ channel LoRaWAN gateway.
It has been tested on the Raspberry Pi platform, using a Semtech SX1272
transceiver (HopeRF RFM92W), and SX1276 (HopeRF RFM95W).

The code is for testing and development purposes only, and is not meant
for production usage.
The code is for testing and development purposes only, and is not meant
for production usage.

Part of the source has been copied from the Semtech Packet Forwarder
Part of the source has been copied from the Semtech Packet Forwarder
(with permission).

Features
Expand All @@ -35,7 +37,7 @@ Not (yet) supported:
Dependencies
------------
- SPI needs to be enabled on the Raspberry Pi (use raspi-config)
- WiringPi: a GPIO access library written in C for the BCM2835
- WiringPi: a GPIO access library written in C for the BCM2835
used in the Raspberry Pi.
sudo apt-get install wiringpi
see http://wiringpi.com
Expand All @@ -45,7 +47,7 @@ Connections
-----------
SX1272 - Raspberry

3.3V - 3.3V (header pin #1)
3.3V - 3.3V (header pin #1)
GND - GND (pin #6)
MISO - MISO (pin #21)
MOSI - MOSI (pin #19)
Expand Down