Skip to content

shinh/bflisp

Repository files navigation

Note: you'd be more interested in ELVM, the successor of this project. In addition to Lisp on Brainfuck, ELVM can compile C code into more esoteric languages such as Unlambda, INTERCAL, Befunge, Piet, Vim script, TeX, C++'s constexpr, etc.

The original goal of this project was to run a Lisp interpreter on Brainfuck. The goal was extended and this project also has a C compiler which runs on Brainfuck. The Lisp interpreter and the C compiler are generated from C code by modified 8cc. This means we have a toolchain which can translate a subset of C to Brainfuck code.

A C compiler in Brainfuck

8cc.bf is the C compiler in Brainfuck.

How?

Here's an overall picture:

Overall picture

The modified 8cc (a small but full featured C compiler) outputs assembly code for a virtual 16bit/24bit Harvard architecture CPU I defined. The CPU has only a handful instructions - mov, add, sub, load, store, comparison, conditional jumps, putc, getc, and exit. See the top comment in bfasm.rb or test/*.bfs for the detail.

Then, bfcore.rb translates the assembly code to Brainfuck code. The CPU has seven 16bit/24bit registers and they are consist of two memory cells in 8bit Brainfuck (btw, I believe 8bit Brainfuck is the best choice for this project). For each cycle, a big (~10k-way for bflisp.bf) switch statement in Brainfuck is executed and each case statement represents the virtual CPU instruction.

Memory operations are done by a loop which finds a corresponding row using the higher bits and a 256-way switch statement for the lower 8bits. The memory module consumes ~1MB (~12MB for 24bit mode) Brainfuck code space.

As the resulted Brainfuck code is big, bfopt.cc was developed. This implementation merges consecutive +- and <>. This also optimizes simple loops with balanced <>.

To make debugging easier, there's a simulator for the virtual CPU (bfsim.rb). Lisp on the virtual CPU simulator is much faster than Lisp on the virtual CPU implemented in Brainfuck. You can use "./bfsim.rb bflisp.bfs" instead of "opt/bfopt bflisp.bf" for faster execution.

echo '(+ 3 4)' | ./bfsim.rb bflisp.bfs
> 7

The BF-targeted 8cc

For simplicity, the BF-targeted 8cc is different from the original 8cc:

  • It lacks bit operations.
  • It lacks floating point numbers.
  • All types are unsigned.
  • sizeof(char)==sizeof(int)==sizeof(void*)==sizeof(long long)==1.
  • One "byte" has 24 bits.
  • Cannot handle #include.
  • It reads C code from the standard input.

With all the restriction above, however, 8cc.bf can compile 8cc.c itself. In other words, 8cc.bf is a self-hosted implementation. You can confirm this by (note you need TCC installed):

$ time make out/8cc.3.bf  # Takes ~10 hours
./merge_8cc.sh > out/8cc.c.tmp && mv out/8cc.c.tmp out/8cc.c
8cc/8cc -S -o out/8cc.bfs.tmp out/8cc.c && mv out/8cc.bfs.tmp out/8cc.bfs
BFS24=1 ./bfcore.rb out/8cc.bfs > out/8cc.bf.tmp && mv out/8cc.bf.tmp out/8cc.bf
out/bfopt -c out/8cc.bf out/8cc.bf.c.tmp && mv out/8cc.bf.c.tmp out/8cc.bf.c
tcc -c out/8cc.bf.c -o out/8cc.bf.tcc.o
cc out/8cc.bf.tcc.o -o out/8cc.bf.tcc.exe
out/8cc.bf.tcc.exe < out/8cc.c > out/8cc.2.bfs.tmp && mv out/8cc.2.bfs.tmp out/8cc.2.bfs
BFS24=1 ./bfcore.rb out/8cc.2.bfs > out/8cc.2.bf.tmp && mv out/8cc.2.bf.tmp out/8cc.2.bf
out/bfopt -c out/8cc.2.bf out/8cc.2.bf.c.tmp && mv out/8cc.2.bf.c.tmp out/8cc.2.bf.c
tcc -c out/8cc.2.bf.c -o out/8cc.2.bf.tcc.o
cc out/8cc.2.bf.tcc.o -o out/8cc.2.bf.tcc.exe
out/8cc.2.bf.tcc.exe < out/8cc.c > out/8cc.3.bfs.tmp && mv out/8cc.3.bfs.tmp out/8cc.3.bfs
BFS24=1 ./bfcore.rb out/8cc.3.bfs > out/8cc.3.bf.tmp && mv out/8cc.3.bf.tmp out/8cc.3.bf
make out/8cc.3.bf  36979.51s user 1.38s system 99% cpu 10:16:50.68 total
$ cmp out/8cc.2.bf out/8cc.3.bf

BfLisp

Lisp implementation in Brainfuck

bflisp.bf is a Lisp interpreter in Brainfuck. This Brainfuck code is generated from lisp.c by modified 8cc.

How to Use

$ make out/bfopt
$ out/bfopt test/hello.bf  # check if bfopt is a valid BF interpreter
Hello, world!
$ echo 2038 01 | out/bfopt test/cal.bf  # check once more
                1  2
 3  4  5  6  7  8  9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
31
$ out/bfopt bflisp.bf
> (car (quote (a b c)))
a
> (cdr (quote (a b c)))
(b c)
> (cons 1 (cons 2 (cons 3 ())))
(1 2 3)
> (defun fact (n) (if (eq n 0) 1 (* n (fact (- n 1)))))
(lambda (n) (if (eq n 0) 1 (* n (fact (- n 1)))))
> (fact 4)
24
> (defun fib (n) (if (eq n 1) 1 (if (eq n 0) 1 (+ (fib (- n 1)) (fib (- n 2))))))
(lambda (n) (if (eq n 1) 1 (if (eq n 0) 1 (+ (fib (- n 1)) (fib (- n 2))))))
> (fib 4)
5
> (defun gen (n) ((lambda (x y) y) (define G n) (lambda (m) (define G (+ G m)))))
(lambda (n) ((lambda (x y) y) (define G n) (lambda (m) (define G (+ G m)))))
> (define x (gen 100))
(lambda (m) (define G (+ G m)))
> (x 10)
110
> (x 90)
200
> (x 300)
500

Builtin Functions

  • car
  • cdr
  • cons
  • eq
  • atom
  • +, -, *, /, mod
  • neg?
  • print

Special Forms

  • quote
  • if
  • lambda
  • defun
  • define

More Complicated Examples

You can test a few more examples.

FizzBuzz (took ~4 mins for me):

$ cat fizzbuzz.l | opt/bfopt bflisp.bf
(lambda (n) (if (eq n 101) nil (if (print (if (eq (mod n 15) 0) FizzBuzz (if (eq (mod n 5) 0) Buzz (if (eq (mod n 3) 0) Fizz n)))) (fizzbuzz (+ n 1)) nil)))
1
2
Fizz
...
98
Fizz
Buzz
nil

Sort (took ~3 mins for me):

$ cat sort.l | opt/bfopt bflisp.bf
...
(1 2 3 4 5 6 7)

Limitations

There should be a lot of limitations. bflisp behaves very strangely when you pass a broken Lisp code.

bflisp.bf should run on any 8bit Brainfuck implementations. However, only optimized implementation can run the Lisp interpreter. bff4.c is an implementation which can run bflisp.bf with little modification (see bff4.patch).

TODO

  • Re-implement bfcore.rb in C so assemble can be done by BF itself.
  • Implement the virtual CPU with other esoteric language.

See also

Acknowledgement

I'd like to thank Rui Ueyama for his easy-to-hack compiler and suggesting the basic idea which made this possible.

About

C compiler and Lisp interpreter in Brainfuck

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published