MC protocol(MELSEC Communication Protocol) implementation by Python.
MC protocol enables you to operate PLC from computer.
pymcptorocol is sponsored by Proxima Technology Inc.
Proxima Technology Inc. is an AI startup company that aims at social implementation of mathematics and as a part of it, aims to privatize model predictive control. Their mission is to change society with the power of mathematical science.
このプロジェクトはProxima Technology様よりご支援を頂いております。
Proxima Technology（プロキシマテクノロジー）は数学の社会実装を⽬指し、その⼀環としてモデル予測制御の⺠主化を掲げているAIスタートアップ企業です。数理科学の⼒で社会を変えることを企業の使命としています。
pip install pymcprotocolpymcprotocol supports only mcprotocol 3E type and test by QPLC.
4E type is implemented. But not tested.
1C~4C type is not suuported.
- Q Series
- L Series
- QnA Series
- iQ-L Series
- iQ-R Series
A and FX series are not supportted because they does not support 3E or 4E type.
You need to open PLC's port for mcprotocol by GxWorks2 or GxWorks3 software.
- Set IP address for PLC
- Open TCP port of PLC
- Set the port for mcprotocol.
- Restart PLC
This page will help you.
English: https://www.faweb.net/en/product/opc/plc/melsec/plc
Japanese: https://qiita.com/satosisotas/items/38f64c872d161b612071
- If you select ascii type communiation,
you also need to set "ascii" mode in setaccessopt method. (default is "bainary" mode) - If you would like to write data in PLC, you have to enable online change
import pymcprotocol
#If you use Q series PLC
pymc3e = pymcprotocol.Type3E()
#if you use L series PLC,
pymc3e = pymcprotocol.Type3E(plctype="L")
#if you use QnA series PLC,
pymc3e = pymcprotocol.Type3E(plctype="QnA")
#if you use iQ-L series PLC,
pymc3e = pymcprotocol.Type3E(plctype="iQ-L")
#if you use iQ-R series PLC,
pymc3e = pymcprotocol.Type3E(plctype="iQ-R")
#If you use 4E type
pymc4e = pymcprotocol.Type4E()
#If you use ascii byte communication, (Default is "binary")
pymc3e.setaccessopt(commtype="ascii")
pymc3e.connect("192.168.1.2", 1025)#read from D100 to D110
wordunits_values = pymc3e.batchread_wordunits(headdevice="D100", readsize=10)
#read from X10 to X20
bitunits_values = pymc3e.batchread_bitunits(headdevice="X10", readsize=10)
#write from D10 to D15
pymc3e.batchwrite_wordunits(headdevice="D10", values=[0, 10, 20, 30, 40])
#write from Y10 to Y15
pymc3e.batchwrite_bitunits(headdevice="Y10", values=[0, 1, 0, 1, 0])
#read "D1000", "D2000" and dword "D3000".
word_values, dword_values = pymc3e.randomread(word_devices=["D1000", "D2000"], dword_devices=["D3000"])
#write 1000 to "D1000", 2000 to "D2000" and 655362 todword "D3000"
pymc3e.randomwrite(word_devices=["D1000", "D1002"], word_values=[1000, 2000],
dword_devices=["D1004"], dword_values=[655362])
#write 1(ON) to "X0", 0(OFF) to "X10"
pymc3e.randomwrite_bitunits(bit_devices=["X0", "X10"], values=[1, 0])#Unlock PLC,
#If you set PLC to locked, you need to unlkock to remote operation
#Except iQ-R, password is 4 character.
pymc3e.remote_unlock(password="1234")
#If you want to hide password from program
#You can enter passwrod directly
pymc3e.remote_unlock(request_input=True)
#Lock PLC
pymc3e.remote_lock(password="1234")
pymc3e.remote_lock(request_input=True)If you connect to your system by E71 module, Ethernet communication module,
These commands are available.
If you connect to PLC directly, C059 error returns.
#remote run, clear all device
pymc3e.remote_run(clear_mode=2, force_exec=True)
#remote stop
pymc3e.remote_stop()
#remote latch clear. (have to PLC be stopped)
pymc3e.remote_latchclear()
#remote pause
pymc3e.remote_pause(force_exec=False)
#remote reset
pymc3e.remote_reset()
#read PLC type
cpu_type, cpu_code = pymc3e.read_cputype()API manual is here.
https://pymcprotocol.netlify.app/
pymcprotocol is Released under the MIT license.
pymcprotocol does not support entire MC protocol since it is very complicated and troublesome.
If you would like to use unsupported function, please make Github issue.