[email protected] + updated serial

include/Version.h

@@ -1,9 +1,9 @@
 
     // AUTO GENERATED FILE, DO NOT EDIT
     #ifndef VERSION
-        #define VERSION "5.16.29"
+        #define VERSION "5.16.30"
     #endif
     #ifndef BUILD_TIMESTAMP
-        #define BUILD_TIMESTAMP "2024-09-07 17:11:31.698757"
+        #define BUILD_TIMESTAMP "2024-09-10 11:03:11.308266"
     #endif
 

src/Globals.cpp

@@ -246,51 +246,45 @@ void Globals::sendSerialInfo() {
     if (currentMillisSendSerial > lastUdpMsgReceived + DELAY_1000) {
       framerateSerial = framerateCounterSerial > 0 ? framerateCounterSerial / 10 : 0;
       framerateCounterSerial = 0;
-      if (framerateSerial == 0) {
-        Serial.printf("framerate:%.1f\n", (framerateSerial > 1 ? framerateSerial : 0));
+      Serial.printf("framerate:%f\n", (framerateSerial > 0.5 ? framerateSerial : 0));
 #ifdef TARGET_GLOWWORMLUCIFERINLIGHT
-        Serial.printf("firmware:%s\n", "LIGHT");
+      Serial.printf("firmware:%s\n", "LIGHT");
 #else
-        Serial.printf("firmware:%s\n", "FULL");
-        Serial.printf("mqttopic:%s\n", netManager.topicInUse.c_str());
+      Serial.printf("firmware:%s\n", "FULL");
+      Serial.printf("mqttopic:%s\n", netManager.topicInUse.c_str());
 #endif
-        Serial.printf("ver:%s\n", VERSION);
-        Serial.printf("lednum:%d\n", ledManager.dynamicLedNum);
+      Serial.printf("ver:%s\n", VERSION);
+      Serial.printf("lednum:%d\n", ledManager.dynamicLedNum);
 #if defined(ESP8266)
-        Serial.printf("board:%s\n", "ESP8266");
+      Serial.printf("board:%s\n", "ESP8266");
 #endif
 #if CONFIG_IDF_TARGET_ESP32C3
-        Serial.printf("board:%s\n", "ESP32_C3_CDC");
+      Serial.printf("board:%s\n", "ESP32_C3_CDC");
 #elif CONFIG_IDF_TARGET_ESP32S2
-        Serial.printf("board:%s\n", "ESP32_S2");
+      Serial.printf("board:%s\n", "ESP32_S2");
 #elif CONFIG_IDF_TARGET_ESP32S3
 #if ARDUINO_USB_MODE==1
-        Serial.printf("board:%s\n", "ESP32_S3_CDC");
+      Serial.printf("board:%s\n", "ESP32_S3_CDC");
 #else
-        Serial.printf("board:%s\n", "ESP32_S3");
+      Serial.printf("board:%s\n", "ESP32_S3");
 #endif
 #elif CONFIG_IDF_TARGET_ESP32
-        Serial.printf("board:%s\n", "ESP32");
+      Serial.printf("board:%s\n", "ESP32");
 #endif
-        Serial.printf("MAC:%s\n", MAC.c_str());
-        Serial.printf("gpio:%d\n", gpioInUse);
-        Serial.printf("gpioClock:%d\n", gpioClockInUse);
-        Serial.printf("baudrate:%d\n", baudRateInUse);
-        Serial.printf("effect:%d\n", Globals::effectToInt(effect));
-        Serial.printf("colorMode:%d\n", colorMode);
-        Serial.printf("colorOrder:%d\n", colorOrder);
-        Serial.printf("white:%d\n", whiteTempInUse);
-        if (ldrEnabled) {
-          Serial.printf("ldr:%d\n", ((ldrValue * 100) / ldrDivider));
-        }
-        Serial.printf("relayPin:%d\n", relayPin);
-        Serial.printf("sbPin:%d\n", sbPin);
-        Serial.printf("ldrPin:%d\n", ldrPin);
-      } else {
-        delay(1);
-        Serial.printf("framerate:%.1f\n", (framerateSerial > 1 ? framerateSerial : 0));
-        delay(1);
+      Serial.printf("MAC:%s\n", MAC.c_str());
+      Serial.printf("gpio:%d\n", gpioInUse);
+      Serial.printf("gpioClock:%d\n", gpioClockInUse);
+      Serial.printf("baudrate:%d\n", baudRateInUse);
+      Serial.printf("effect:%d\n", Globals::effectToInt(effect));
+      Serial.printf("colorMode:%d\n", colorMode);
+      Serial.printf("colorOrder:%d\n", colorOrder);
+      Serial.printf("white:%d\n", whiteTempInUse);
+      if (ldrEnabled) {
+        Serial.printf("ldr:%d\n", ((ldrValue * 100) / ldrDivider));
       }
+      Serial.printf("relayPin:%d\n", relayPin);
+      Serial.printf("sbPin:%d\n", sbPin);
+      Serial.printf("ldrPin:%d\n", ldrPin);
       Serial.flush();
     }
   }

version

@@ -1 +1 @@
-5.16.29
+5.16.30