Skip to content

os11k/freeswitch_minimal_with_perf_settings

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

1 Commit
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Minimal FreeSWITCH Configuration with minimal performance settings

The default "vanilla" configuration that comes with FreeSWITCH has been designed as a showcase of the configurability of the myriad of features that FreeSWITCH comes with out of the box. While it is very helpful in tinkering with FreeSWITCH, it has a lot of extraneous stuff enabled/configured for use in a production system. This configuration aims to take the reverse stance -- it attempts to be a starting point for configuring a new system by "adding" required features (instead of removing them as one would do if one starts with the default configuration).

This folder also includes the corresponding modules.conf that lists the modules that are required to get this configuration working.

Test

This configuration was tested by sending an INVITE (without registration) using the siprtp example program that comes with PJSIP, and verifying that the info dump is produced on the FreeSWITCH console.

$ ./siprtp -q -p 1234 "sip:stub@$(my_ip):5080"

Upstream

The configuration in this folder comes from mx4492/freeswitch-minimal-conf.

Other Minimal Configurations

About

Freeswitch minimal config with applied performance settings

Topics

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published