netshoot: a Docker + Kubernetes network trouble-shooting swiss-army container

                    dP            dP                           dP
                    88            88                           88
88d888b. .d8888b. d8888P .d8888b. 88d888b. .d8888b. .d8888b. d8888P
88'  `88 88ooood8   88   Y8ooooo. 88'  `88 88'  `88 88'  `88   88
88    88 88.  ...   88         88 88    88 88.  .88 88.  .88   88
dP    dP `88888P'   dP   `88888P' dP    dP `88888P' `88888P'   dP

Purpose: Docker and Kubernetes network troubleshooting can become complex. With proper understanding of how Docker and Kubernetes networking works and the right set of tools, you can troubleshoot and resolve these networking issues. The netshoot container has a set of powerful networking troubleshooting tools that can be used to troubleshoot Docker networking issues. Along with these tools come a set of use-cases that show how this container can be used in real-world scenarios.

Network Namespaces: Before starting to use this tool, it's important to go over one key topic: Network Namespaces. Network namespaces provide isolation of the system resources associated with networking. Docker uses network and other type of namespaces (pid,mount,user.. etc) to create an isolated environment for each container. Everything from interfaces, routes, and IPs is completely isolated within the network namespace of the container.

Kubernetes also uses network namespaces. Kubelets creates a network namespace per pod where all containers in that pod share that same network namespace (eths, IP, tcp sockets...etc). This is a key difference between Docker containers and Kubernetes pods.

Cool thing about namespaces is that you can switch between them. You can enter a different container's network namespace, perform some troubleshooting on its network's stack with tools that aren't even installed on that container. Additionally, netshoot can be used to troubleshoot the host itself by using the host's network namespace. This allows you to perform any troubleshooting without installing any new packages directly on the host or your application's package.

Container's Network Namespace: If you're having networking issues with your application's container, you can launch netshoot with that container's network namespace like this :

$ docker run -it --net container:<container_name> ghcr.io/mindw/netshoot:master

Host's Network Namespace: If you think the networking issue is on the host itself, you can launch netshoot with that host's network namespace. This is how:

$ docker run -it --net host ghcr.io/mindw/netshoot:master

Network's Network Namespace: If you want to troubleshoot a Docker network, you can enter the network's namespace using nsenter. This is explained in the nsenter
section below.

Kubernetes

if you want to debug using an ephemeral container in an existing pod:

$ kubectl debug mypod -it --image=ghcr.io/mindw/netshoot:master

if you want to spin up a throw away pod for debugging.

$ kubectl run tmp-shell --image-pull-policy=Always --rm -it --image ghcr.io/mindw/netshoot:master

And if you want to spin up a container on the host's network namespace.

$ kubectl run tmp-shell --image-pull-policy=Always --rm -it \
  --overrides='{"spec": {"hostNetwork": true, "enableServiceLinks": false}}'  --image ghcr.io/mindw/netshoot:master

Privileged and host networking.

$ kubectl run tmp-shell --image ghcr.io/mindw/netshoot:master --rm -ti\
 --overrides='{"spec": {"hostNetwork": true, "enableServiceLinks": false, "containers": [{"name": "tmp-shell", "image": "ghcr.io/mindw/netshoot:master", "imagePullPolicy": "Always", "tty": true, "stdin": true, "securityContext": {"privileged": true} }]}}'

Network Problems

Many network issues could result in application performance degradation. Some of those issues could be related to the underlying networking infrastructure(underlay). Others could be related to misconfiguration at the host or Docker level. Let's take a look at common networking issues:

latency
routing
DNS resolution
firewall
incomplete ARPs

To troubleshoot these issues, netshoot includes a set of powerful tools as recommended by this diagram.

Included Packages

The following packages are included in netshoot. We'll go over some with some sample use-cases.

atop: Resource-specific view of processes
btop: Resource monitor
bcc: A toolkit for creating efficient kernel tracing and manipulation programs
bcc-tools: Command line tools for BPF Compiler Collection (BCC)
bpftool - Linux kernel bpf manipulation tool.
bpftrace: High-level tracing language for Linux eBPF
bpftrace-tools: High-level tracing language for Linux eBPF (tools)
ctop: Top-like interface for container metrics
fatrace: Report system wide file access events
fio: Flexible I/O Tester
fortio: A load testing library, command line tool, advanced echo server and web UI.
fping: A utility to ping multiple hosts at once
hping3: A ping-like TCP/IP packet assembler/analyzer
htop: Interactive process viewer
iftop: A tool to display bandwidth usage on an interface
ioping: A simple disk i/o latency measurement tool
inotify-tools: C library and CLI tools providing a simple interface to inotify
iperf: A tool to measure IP bandwidth using UDP or TCP
iperf3: A tool to measure IP bandwidth using UDP or TCP
iptraf-ng: An IP Network Monitoring tool
ltrace: Tracks runtime library calls in dynamically linked programs
lttng-tools: LTTng 2.0 control and utility programs
mtr: Full screen ncurses traceroute tool
neofetch: A CLI system information tool written in Bash that supports displaying images
netcat-openbsd: The TCP/IP swiss army knife. OpenBSD variant.
nmap: network exploration tool and security/port scanner
nmap-nping: network exploration tool and security/port scanner (nping tool)
perf: Linux kernel performance auditing tool
procs: Modern replacement for ps written in Rust
pstree: A small tool to list processes as a tree
scapy: Powerful interactive packet manipulation
socat: Multipurpose relay for binary protocols
stress-ng: Stress tests a computer system in various selectable ways
strace: Diagnostic, debugging and instructional userspace tracer
sysstat: Performance monitoring tools
tiptop: Tiptop: Hardware Performance Counters for the Masses

Included Networking tools

apache2-utils: Apache utility programs for webservers
bind-tools: The ISC DNS tools
bird: BIRD Internet Routing Daemon
bridge-utils: Tools for configuring the Linux kernel 802.1d Ethernet Bridge
ca-certificates: Common CA certificates PEM files from Mozilla
conntrack-tools: Connection tracking userspace tools
curl: URL retrieval utility and library
dhcping: dhcp daemon ping program
drill: DNS(SEC) query tool ala dig
ethtool: Utility for controlling network drivers and hardware
grpcurl: Like cURL, but for gRPC - Command-line tool for interacting with gRPC servers.
httpie: human-friendly CLI HTTP client for the API era
httpx: a fully featured HTTP client for Python 3, which provides sync and async APIs, and support for both HTTP/1.1 and HTTP/2.
iptables: Linux kernel firewall, NAT and packet mangling tools
ip6tables: Linux kernel firewall, NAT and packet mangling tools
iproute2: IP Routing Utilities
ipset: Manage Linux IP sets
iputils: IP Configuration Utilities (and Ping)
ipvsadm: The IP Virtual Server administration utility
net-snmp-tools: Network management utilities using SNMP
ngrep: A grep-like utility that allows you to search for network packets on an interface
nftables: Netfilter tables userspace tools
open-lldp: Open Source implementation of the IEEE standard 802.1AB Link Layer Discovery Protocol (LLDP)
openssh: Port of OpenBSD's free SSH release
openssl: Toolkit for Transport Layer Security (TLS)
swaks: Swiss Army Knife for SMTP
tcpdump: A tool for network monitoring and data acquisition
tcptraceroute: Display route path using TCP probes
termshark: terminal UI for tshark, inspired by Wireshark
tshark: Network protocol analyzer (Console version)
websocat: Netcat, curl and socat for WebSockets
wireguard-tools: Next generation secure network tunnel: userspace tools
wget: Network utility to retrieve files from the Web

Included Kubernetes, cloud and container tools

aws-cli2: Universal Command Line Interface for Amazon Web Services
buildah: tool that facilitates building OCI container images
calicoctl: Used to manage Calico policies and configuration, as well as view detailed cluster status
helm: The Kubernetes Package Manager.
k9s: A terminal based UI to interact with your Kubernetes clusters
krew: A plugin manager for kubectl command-line tool
kubectl: The Kubernetes command-line tool, kubectl, allows you to run commands against Kubernetes clusters
kubectl-alias: Programmatically generated handy kubectl aliases.
podman: Simple management tool for pods, containers and images
skopeo: Work with remote images registries - retrieving information, images, signing content
stern: Multi pod and container log tailing for Kubernetes

Included text manipulations tools

diffutils: Show differences among files
grep: Searches input files for lines containing a match to a specified pattern
jc: JSONifies the output of many CLI tools, file-types, and common strings for easier parsing in scripts
jo: JSON output from a shell
jq: A lightweight and flexible command-line JSON processor
less: File pager
ripgrep: Combines the usability of The Silver Searcher with the raw speed of grep
yq: Portable command-line YAML processor written in Go

Included mostly well known system tools

7zip: File archiver with a high compression ratio
bash: The GNU Bourne Again shell
bash-completion: bash-completion
busybox-extras: Additional binaries of Busybox
cgroup-tools: cgroup library (tools)
coreutils: The basic file, shell and text manipulation utilities
file: File type identification utility
findutils: GNU utilities for finding files
git: Distributed version control system
git-bash-completion: Bash completions for git
ipython: A rich toolkit to help you make the most of using Python interactively
moreutils: A growing collection of the unix tools that nobody thought to write thirty years ago
py3-pip: Tool for installing and managing Python packages
py3-virtualenv: Virtual Python3 Environment builder
python3: A high-level scripting language
shadow: PAM-using login and passwd utilities (usermod, useradd, ...)
su-exec: switch user and group id, setgroups and exec
sudo: Give certain users the ability to run some commands as root
tar: Utility used to store, backup, and transport files
tini: A tiny but valid init for containers
tree: A recursive directory indented listing of files
unzip: Extract PKZIP-compatible .zip files
util-linux: Random collection of Linux utilities
vim: Improved vi-style text editor

Sample Use-cases

iperf

Purpose: test networking performance between two containers/hosts.

Create Overlay network:

$ docker network create -d overlay perf-test

Launch two containers:

🐳  → docker service create --name perf-test-a --network perf-test ghcr.io/mindw/netshoot:master iperf -s -p 9999
7dkcckjs0g7b4eddv8e5ez9nv


🐳  → docker service create --name perf-test-b --network perf-test ghcr.io/mindw/netshoot:master iperf -c perf-test-a -p 9999
2yb6fxls5ezfnav2z93lua8xl



 🐳  → docker service ls
ID            NAME         REPLICAS  IMAGE                          COMMAND
2yb6fxls5ezf  perf-test-b  1/1       ghcr.io/mindw/netshoot:master  iperf -c perf-test-a -p 9999
7dkcckjs0g7b  perf-test-a  1/1       ghcr.io/mindw/netshoot:master  iperf -s -p 9999



🐳  → docker ps
CONTAINER ID        IMAGE                                  COMMAND                  CREATED             STATUS              PORTS               NAMES
ce4ff40a5456        ghcr.io/mindw/netshoot:master:latest   "iperf -s -p 9999"       31 seconds ago      Up 30 seconds                           perf-test-a.1.bil2mo8inj3r9nyrss1g15qav

🐳  → docker logs ce4ff40a5456
------------------------------------------------------------
Server listening on TCP port 9999
TCP window size: 85.3 KByte (default)
------------------------------------------------------------
[  4] local 10.0.3.3 port 9999 connected with 10.0.3.5 port 35102
[ ID] Interval       Transfer     Bandwidth
[  4]  0.0-10.0 sec  32.7 GBytes  28.1 Gbits/sec
[  5] local 10.0.3.3 port 9999 connected with 10.0.3.5 port 35112

tcpdump

tcpdump is a powerful and common packet analyzer that runs under the command line. It allows the user to display TCP/IP and other packets being transmitted or received over an attached network interface.

# Continuing on the iperf example. Let's launch netshoot with perf-test-a's container network namespace.

🐳  → docker run -it --net container:perf-test-a.1.0qlf1kaka0cq38gojf7wcatoa  ghcr.io/mindw/netshoot:master 

# Capturing packets on eth0 and tcp port 9999.

/ # tcpdump -i eth0 port 9999 -c 1 -Xvv
tcpdump: listening on eth0, link-type EN10MB (Ethernet), capture size 262144 bytes
23:14:09.771825 IP (tos 0x0, ttl 64, id 60898, offset 0, flags [DF], proto TCP (6), length 64360)
    10.0.3.5.60032 > 0e2ccbf3d608.9999: Flags [.], cksum 0x1563 (incorrect -> 0x895d), seq 222376702:222441010, ack 3545090958, win 221, options [nop,nop,TS val 2488870 ecr 2488869], length 64308
	0x0000:  4500 fb68 ede2 4000 4006 37a5 0a00 0305  E..h..@[email protected].....
	0x0010:  0a00 0303 ea80 270f 0d41 32fe d34d cb8e  ......'..A2..M..
	0x0020:  8010 00dd 1563 0000 0101 080a 0025 fa26  .....c.......%.&
	0x0030:  0025 fa25 0000 0000 0000 0001 0000 270f  .%.%..........'.
	0x0040:  0000 0000 0000 0000 ffff d8f0 3435 3637  ............4567
	0x0050:  3839 3031 3233 3435 3637 3839 3031 3233  8901234567890123
	0x0060:  3435 3637 3839 3031 3233 3435 3637 3839  4567890123456789
	0x0070:  3031 3233 3435 3637 3839 3031 3233 3435  0123456789012345
	0x0080:  3637 3839 3031 3233 3435 3637 3839 3031  6789012345678901
	0x0090:  3233 3435 3637 3839 3031 3233 3435 3637  2345678901234567
	0x00a0:  3839 3031 3233 3435 3637 3839 3031 3233  8901234567890123
	0x00b0:  3435 3637 3839 3031 3233 3435 3637 3839  4567890123456789
	0x00c0:  3031 3233 3435 3637 3839 3031 3233 3435  0123456789012345
	0x00d0:  3637 3839 3031 3233 3435 3637 3839 3031  6789012345678901
	0x00e0:  3233 3435 3637 3839 3031 3233 3435 3637  2345678901234567
	0x00f0:  3839 3031 3233 3435 3637 3839 3031 3233  8901234567890123
	0x0100:  3435 3637 3839 3031 3233 3435 3637 3839  4567890123456789

More info on tcpdump can be found here.

netstat

Purpose: netstat is a useful tool for checking your network configuration and activity.

Continuing on from iperf example. Let's use netstat to confirm that it's listening on port 9999.

🐳  → docker run -it --net container:perf-test-a.1.0qlf1kaka0cq38gojf7wcatoa  ghcr.io/mindw/netshoot:master 

/ # netstat -tulpn
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       PID/Program name
tcp        0      0 127.0.0.11:46727        0.0.0.0:*               LISTEN      -
tcp        0      0 0.0.0.0:9999            0.0.0.0:*               LISTEN      -
udp        0      0 127.0.0.11:39552        0.0.0.0:*                           -

nmap

nmap ("Network Mapper") is an open source tool for network exploration and security auditing. It is very useful for scanning to see which ports are open between a given set of hosts. This is a common thing to check for when installing Swarm or UCP because a range of ports is required for cluster communication. The command analyzes the connection pathway between the host where nmap is running and the given target address.

🐳  → docker run -it --privileged ghcr.io/mindw/netshoot:master nmap -p 12376-12390 -dd 172.31.24.25

...
Discovered closed port 12388/tcp on 172.31.24.25
Discovered closed port 12379/tcp on 172.31.24.25
Discovered closed port 12389/tcp on 172.31.24.25
Discovered closed port 12376/tcp on 172.31.24.25
...

There are several states that ports will be discovered as:

open: the pathway to the port is open and there is an application listening on this port.
closed: the pathway to the port is open but there is no application listening on this port.
filtered: the pathway to the port is closed, blocked by a firewall, routing rules, or host-based rules.

iftop

Purpose: iftop does for network usage what top does for CPU usage. It listens to network traffic on a named interface and displays a table of current bandwidth usage by pairs of hosts.

Continuing the iperf example.

 → docker ps
CONTAINER ID        IMAGE                      COMMAND                  CREATED             STATUS              PORTS               NAMES
ce4ff40a5456        ghcr.io/mindw/netshoot:master:latest   "iperf -s -p 9999"       5 minutes ago       Up 5 minutes                            perf-test-a.1.bil2mo8inj3r9nyrss1g15qav

🐳  → docker run -it --net container:perf-test-a.1.bil2mo8inj3r9nyrss1g15qav ghcr.io/mindw/netshoot:master iftop -i eth0

drill

Purpose: drill is a tool to designed to get all sorts of information out of the DNS.

Continuing the iperf example, we'll use drill to understand how services' DNS is resolved in Docker.

🐳  → docker run -it --net container:perf-test-a.1.bil2mo8inj3r9nyrss1g15qav ghcr.io/mindw/netshoot:master drill -V 5 perf-test-b
;; ->>HEADER<<- opcode: QUERY, rcode: NOERROR, id: 0
;; flags: rd ; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 0
;; QUESTION SECTION:
;; perf-test-b.	IN	A

;; ANSWER SECTION:

;; AUTHORITY SECTION:

;; ADDITIONAL SECTION:

;; Query time: 0 msec
;; WHEN: Thu Aug 18 02:08:47 2016
;; MSG SIZE  rcvd: 0
;; ->>HEADER<<- opcode: QUERY, rcode: NOERROR, id: 52723
;; flags: qr rd ra ; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0
;; QUESTION SECTION:
;; perf-test-b.	IN	A

;; ANSWER SECTION:
perf-test-b.	600	IN	A	10.0.3.4 <<<<<<<<<<<<<<<<<<<<<<<<<< Service VIP

;; AUTHORITY SECTION:

;; ADDITIONAL SECTION:

;; Query time: 1 msec
;; SERVER: 127.0.0.11 <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< Local resolver 
;; WHEN: Thu Aug 18 02:08:47 2016
;; MSG SIZE  rcvd: 56

netcat

Purpose: a simple Unix utility that reads and writes data across network connections, using the TCP or UDP protocol. It's useful for testing and troubleshooting TCP/UDP connections. netcat can be used to detect if there's a firewall rule blocking certain ports.

🐳  → docker network create -d overlay my-ovl
55rohpeerwqx8og4n0byr0ehu

🐳  → docker service create --name service-a --network my-ovl -p 8080:8080 ghcr.io/mindw/netshoot:master nc -l 8080
bnj517hh4ylpf7ewawsp9unrc

🐳  → docker service create --name service-b --network my-ovl ghcr.io/mindw/netshoot:master nc -vz service-a 8080
3xv1ukbd3kr03j4uybmmlp27j

🐳  → docker logs service-b.1.0c5wy4104aosovtl1z9oixiso
Connection to service-a 8080 port [tcp/http-alt] succeeded!

hping

Purpose: Packet generator capable of doing quite a lot. In terms of troubleshooting, handy to test network latency where ICMP does not work.

Example : Test network latency from the container to a remote host on a specific port

🐳  → docker run -it --net container:perf-test-a.1.bil2mo8inj3r9nyrss1g15qav nicolaka/netshoot hping -S -c 5 google.com -p 80
HPING google.com (eth0 74.125.201.139): S set, 40 headers + 0 data bytes
len=44 ip=74.125.201.139 ttl=62 id=40057 sport=80 flags=SA seq=0 win=65504 rtt=42.8 ms
len=44 ip=74.125.201.139 ttl=62 id=40058 sport=80 flags=SA seq=1 win=65504 rtt=44.6 ms
len=44 ip=74.125.201.139 ttl=62 id=40059 sport=80 flags=SA seq=2 win=65504 rtt=43.1 ms
len=44 ip=74.125.201.139 ttl=62 id=40060 sport=80 flags=SA seq=3 win=65504 rtt=37.2 ms
len=44 ip=74.125.201.139 ttl=62 id=40061 sport=80 flags=SA seq=4 win=65504 rtt=34.6 ms
--- google.com hping statistic ---
5 packets tramitted, 5 packets received, 0% packet loss
round-trip min/avg/max = 34.6/40.5/44.6 ms

netgen

Purpose: netgen is a simple script that will generate a packet of data between containers periodically using netcat. The generated traffic can be used to demonstrate different features of the networking stack.

netgen <host> <ip> will create a netcat server and client listening and sending to the same port.

Using netgen with docker run:

🐳  →  docker network create -d bridge br
01b167971453700cf0a40d7e1a0dc2b0021e024bbb119541cc8c1858343c9cfc

🐳  →  docker run -d --rm --net br --name c1 ghcr.io/mindw/netshoot:master netgen c2 5000
8c51eb2100c35d14244dcecb80839c780999159985415a684258c7154ec6bd42

🐳  →  docker run -it --rm --net br --name c2 ghcr.io/mindw/netshoot:master netgen c1 5000
Listener started on port 5000
Sending traffic to c1 on port 5000 every 10 seconds
Sent 1 messages to c1:5000
Sent 2 messages to c1:5000

🐳  →  sudo tcpdump -vvvn -i eth0 port 5000
...

Using netgen with docker services:

🐳  →  docker network create -d overlay ov
01b167971453700cf0a40d7e1a0dc2b0021e024bbb119541cc8c1858343c9cfc

🐳  →  docker service create --network ov --replicas 3 --name srvc netshoot netgen srvc 5000
y93t8mb9wgzsc27f7l2rdu5io

🐳  →  docker service logs srvc
srvc.1.vwklts5ybq5w@moby    | Listener started on port 5000
srvc.1.vwklts5ybq5w@moby    | Sending traffic to srvc on port 5000 every 10 seconds
srvc.1.vwklts5ybq5w@moby    | Sent 1 messages to srvc:5000
srvc.3.dv4er00inlxo@moby    | Listener started on port 5000
srvc.2.vu47gf0sdmje@moby    | Listener started on port 5000
...


🐳  →  sudo tcpdump -vvvn -i eth0 port 5000
...

iproute2

purpose: a collection of utilities for controlling TCP / IP networking and traffic control in Linux.

# Sample routing and arp table of the docker host.

🐳  → docker run -it --net host ghcr.io/mindw/netshoot:master

/ # ip route show
default via 192.168.65.1 dev eth0  metric 204
172.17.0.0/16 dev docker0  proto kernel  scope link  src 172.17.0.1
172.19.0.0/16 dev br-fd694678f5c3  proto kernel  scope link  src 172.19.0.1 linkdown
172.20.0.0/16 dev docker_gwbridge  proto kernel  scope link  src 172.20.0.1
172.21.0.0/16 dev br-0d73cc4ac114  proto kernel  scope link  src 172.21.0.1 linkdown
172.22.0.0/16 dev br-1eb1f1e84df8  proto kernel  scope link  src 172.22.0.1 linkdown
172.23.0.0/16 dev br-aafed4ec941f  proto kernel  scope link  src 172.23.0.1 linkdown
192.168.65.0/29 dev eth0  proto kernel  scope link  src 192.168.65.2

/ # ip neigh show
192.168.65.1 dev eth0 lladdr f6:16:36:bc:f9:c6 STALE
172.17.0.7 dev docker0 lladdr 02:42:ac:11:00:07 STALE
172.17.0.6 dev docker0 lladdr 02:42:ac:11:00:06 STALE
172.17.0.5 dev docker0 lladdr 02:42:ac:11:00:05 STALE

More info on iproute2 here

nsenter

Purpose: nsenter is a powerful tool allowing you to enter into any namespaces. nsenter is available inside netshoot but requires netshoot to be run as a privileged container. Additionally, you may want to mount the /var/run/docker/netns directory to be able to enter any network namespace including bridge and overlay networks.

With docker run --name container-B --net container:container-A, docker uses container-A's network namespace ( including interfaces and routes) when creating container-B. This approach is helpful for troubleshooting network issues at the container level. To troubleshoot network issues at the bridge or overlay network level, you need to enter the namespace of the network itself. nsenter allows you to do that.

For example, if we wanted to check the L2 forwarding table for a overlay network. We need to enter the overlay network namespace and use same tools in netshoot to check these entries. The following examples go over some use cases for using nsenter to understand what's happening within a docker network ( overlay in this case).

# Creating an overlay network
🐳  → docker network create -d overlay nsenter-test
9tp0f348donsdj75pktssd97b

# Launching a simple busybox service with 3 replicas
🐳  → docker service create --name nsenter-l2-table-test --replicas 3 --network nsenter-test busybox ping localhost
3692i3q3u8nephdco2c10ro4c

# Inspecting the service
🐳  → docker network inspect nsenter-test
[
    {
        "Name": "nsenter-test",
        "Id": "9tp0f348donsdj75pktssd97b",
        "Scope": "swarm",
        "Driver": "overlay",
        "EnableIPv6": false,
        "IPAM": {
            "Driver": "default",
            "Options": null,
            "Config": [
                {
                    "Subnet": "10.0.1.0/24",
                    "Gateway": "10.0.1.1"
                }
            ]
        },
        "Internal": false,
        "Containers": {
            "0ebe0fab555d2e2ef2fcda634bef2071ad3f5842b06bd134b40f259ab9be4f13": {
                "Name": "nsenter-l2-table-test.2.83uezc16jcaz2rp6cjwyf4605",
                "EndpointID": "3064946bb0224a4b3647cefcba18dcbea71b90a2ba1c09212a7bc599ec1ed3eb",
                "MacAddress": "02:42:0a:00:01:04",
                "IPv4Address": "10.0.1.4/24",
                "IPv6Address": ""
            },
            "55065360ac1c71638fdef50a073a661dec53b693409c5e09f8f854abc7dbb373": {
                "Name": "nsenter-l2-table-test.1.4ryh3wmmv21nsrfwmilanypqq",
                "EndpointID": "f81ae5f979d6c54f60636ca9bb2107d95ebf9a08f64786c549e87a66190f1b1f",
                "MacAddress": "02:42:0a:00:01:03",
                "IPv4Address": "10.0.1.3/24",
                "IPv6Address": ""
            },
            "57eca277749bb01a488f0e6c4e91dc6720b7c8f08531536377b29a972971f54b": {
                "Name": "nsenter-l2-table-test.3.9cuoq5m2ue1wi4lsw64k88tvz",
                "EndpointID": "ff1a251ffd6c674cd5fd117386d1a197ab68b4ed708187035d91ff5bd5fe0251",
                "MacAddress": "02:42:0a:00:01:05",
                "IPv4Address": "10.0.1.5/24",
                "IPv6Address": ""
            }
        },
        "Options": {
            "com.docker.network.driver.overlay.vxlanid_list": "260"
        },
        "Labels": {}
    }
]

# Launching netshoot in privileged mode
 🐳  → docker run -it --rm -v /var/run/docker/netns:/var/run/docker/netns --privileged=true nicolaka/netshoot
 
# Listing all docker-created network namespaces
 
/ # cd /var/run/docker/netns/
/var/run/docker/netns # ls
0b1b36d33313  1-9tp0f348do  14d1428c3962  645eb414b538  816b96054426  916dbaa7ea76  db9fd2d68a9b  e79049ce9994  f857b5c01ced
1-9r17dodsxt  1159c401b8d8  1a508036acc8  7ca29d89293c  83b743f2f087  aeed676a57a5  default       f22ffa5115a0

# The overlay network that we created had an id of 9tp0f348donsdj75pktssd97b. All overlay networks are named <number>-<id>. We can see it in the list as `1-9tp0f348do`. To enter it:

/ # nsenter --net=/var/run/docker/netns/1-9tp0f348do sh

# Now all the commands we issue are within that namespace. 

/ # ifconfig
br0       Link encap:Ethernet  HWaddr 02:15:B8:E7:DE:B3
          inet addr:10.0.1.1  Bcast:0.0.0.0  Mask:255.255.255.0
          inet6 addr: fe80::20ce:a5ff:fe63:437d%32621/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1450  Metric:1
          RX packets:36 errors:0 dropped:0 overruns:0 frame:0
          TX packets:18 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:2224 (2.1 KiB)  TX bytes:1348 (1.3 KiB)

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1%32621/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:4 errors:0 dropped:0 overruns:0 frame:0
          TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1
          RX bytes:336 (336.0 B)  TX bytes:336 (336.0 B)

veth2     Link encap:Ethernet  HWaddr 02:15:B8:E7:DE:B3
          inet6 addr: fe80::15:b8ff:fee7:deb3%32621/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1450  Metric:1
          RX packets:9 errors:0 dropped:0 overruns:0 frame:0
          TX packets:32 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:690 (690.0 B)  TX bytes:2460 (2.4 KiB)

veth3     Link encap:Ethernet  HWaddr 7E:55:C3:5C:C2:78
          inet6 addr: fe80::7c55:c3ff:fe5c:c278%32621/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1450  Metric:1
          RX packets:13 errors:0 dropped:0 overruns:0 frame:0
          TX packets:26 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:970 (970.0 B)  TX bytes:1940 (1.8 KiB)

veth4     Link encap:Ethernet  HWaddr 72:95:AB:A1:6A:87
          inet6 addr: fe80::7095:abff:fea1:6a87%32621/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1450  Metric:1
          RX packets:14 errors:0 dropped:0 overruns:0 frame:0
          TX packets:27 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:1068 (1.0 KiB)  TX bytes:2038 (1.9 KiB)

vxlan1    Link encap:Ethernet  HWaddr EA:EC:1D:B1:7D:D7
          inet6 addr: fe80::e8ec:1dff:feb1:7dd7%32621/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1450  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:33 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

# Let's check out the L2 forwarding table. These MAC addresses belong to the tasks/containers in this service. 

/ # bridge  fdb show br br0
33:33:00:00:00:01 dev br0 self permanent
01:00:5e:00:00:01 dev br0 self permanent
33:33:ff:63:43:7d dev br0 self permanent
ea:ec:1d:b1:7d:d7 dev vxlan1 master br0 permanent
02:15:b8:e7:de:b3 dev veth2 master br0 permanent
33:33:00:00:00:01 dev veth2 self permanent
01:00:5e:00:00:01 dev veth2 self permanent
33:33:ff:e7:de:b3 dev veth2 self permanent
7e:55:c3:5c:c2:78 dev veth3 master br0 permanent
33:33:00:00:00:01 dev veth3 self permanent
01:00:5e:00:00:01 dev veth3 self permanent
33:33:ff:5c:c2:78 dev veth3 self permanent
72:95:ab:a1:6a:87 dev veth4 master br0 permanent
33:33:00:00:00:01 dev veth4 self permanent
01:00:5e:00:00:01 dev veth4 self permanent
33:33:ff:a1:6a:87 dev veth4 self permanent


# ARP and routing tables. Note that an overlay network only routes traffic for that network. It only has a single route that matches the subnet of that network.

/ # ip neigh show
/ # ip route
10.0.1.0/24 dev br0  proto kernel  scope link  src 10.0.1.1

# Looks like the arp table is flushed. Let's ping some of the containers on this network.

/ # ping 10.0.1.4
PING 10.0.1.4 (10.0.1.4) 56(84) bytes of data.
64 bytes from 10.0.1.4: icmp_seq=1 ttl=64 time=0.207 ms
64 bytes from 10.0.1.4: icmp_seq=2 ttl=64 time=0.087 ms
^C
--- 10.0.1.4 ping statistics ---
2 packets transmitted, 2 received, 0% packet loss, time 1002ms
rtt min/avg/max/mdev = 0.087/0.147/0.207/0.060 ms

/ # ip neigh show
10.0.1.4 dev br0 lladdr 02:42:0a:00:01:04 REACHABLE

# and using bridge-utils to show interfaces of the overlay network local bridge.

/ # brctl show
bridge name	bridge id		STP enabled	interfaces
br0		8000.0215b8e7deb3	no		vxlan1
							veth2
							veth3
							veth4

CTOP

ctop is a free open source, simple and cross-platform top-like command-line tool for monitoring container metrics in real-time. It allows you to get an overview of metrics concerning CPU, memory, network, I/O for multiple containers and also supports inspection of a specific container.

To get data into ctop, you'll need to bind docker.sock into the netshoot container.

/ # docker run -it --rm -v /var/run/docker.sock:/var/run/docker.sock ghcr.io/mindw/netshoot:master ctop

It will display running and existed containers with useful metrics to help troubleshoot resource issues; hit "q" to exit.

Termshark

Termshark is a terminal user-interface for tshark. It allows user to read pcap files or sniff live interfaces with Wireshark's display filters.

# Launching netshoot with NET_ADMIN and NET_RAW capabilities. Capturing packets on eth0 with icmp 
/ # docker run --rm --cap-add=NET_ADMIN --cap-add=NET_RAW -it nicolaka/netshoot termshark -i eth0 icmp

# Launching netshoot with NET_ADMIN and NET_RAW capabilities Reading packets from ipv4frags.pcap

/ # docker run --rm --cap-add=NET_ADMIN --cap-add=NET_RAW -v /tmp/ipv4frags.pcap:/tmp/ipv4frags.pcap -it nicolaka/netshoot termshark -r /tmp/ipv4frags.pcap

More info on termshark here

Swaks

Swaks (Swiss Army Knife for SMTP) is a featureful, flexible, scriptable, transaction-oriented SMTP test tool. It is free to use and licensed under the GNU GPLv2. You can use it to test and troubleshoot email servers with a crystal-clear syntax:

swaks --to [email protected] \
  --from [email protected] --h-From: '"Fred Example" <[email protected]>' \
  --auth CRAM-MD5 --auth-user [email protected] \
  --header-X-Test "test email" \
  --tls \
  --data "Example body"

More info, examples and lots of documentation on Swaks here

Grpcurl

grpcurl is a command-line tool that lets you interact with gRPC servers. It's basically curl for gRPC servers. Invoking an RPC on a trusted server (e.g. TLS without self-signed key or custom CA) that requires no client certs and supports server reflection is the simplest thing to do with grpcurl. This minimal invocation sends an empty request body:

grpcurl grpc.server.com:443 my.custom.server.Service/Method
# no TLS
grpcurl -plaintext grpc.server.com:80 my.custom.server.Service/Method

More info, examples and lots of documentation on Grpcurl here

Fortio

Fortio is a fast, small (4Mb docker image, minimal dependencies), reusable, embeddable go library as well as a command line tool and server process, the server includes a simple web UI and REST API to trigger run and see graphical representation of the results (both a single latency graph and a multiple results comparative min, max, avg, qps and percentiles graphs).

$ fortio load http://www.google.com
Fortio X.Y.Z running at 8 queries per second, 8->8 procs, for 5s: http://www.google.com
19:10:33 I httprunner.go:84> Starting http test for http://www.google.com with 4 threads at 8.0 qps
Starting at 8 qps with 4 thread(s) [gomax 8] for 5s : 10 calls each (total 40)
19:10:39 I periodic.go:314> T002 ended after 5.056753279s : 10 calls. qps=1.9775534712220633
19:10:39 I periodic.go:314> T001 ended after 5.058085991s : 10 calls. qps=1.9770324224999916
19:10:39 I periodic.go:314> T000 ended after 5.058796046s : 10 calls. qps=1.9767549252963101
19:10:39 I periodic.go:314> T003 ended after 5.059557593s : 10 calls. qps=1.9764573910247019
Ended after 5.059691387s : 40 calls. qps=7.9056
Sleep times : count 36 avg 0.49175757 +/- 0.007217 min 0.463508712 max 0.502087879 sum 17.7032725
Aggregated Function Time : count 40 avg 0.060587641 +/- 0.006564 min 0.052549016 max 0.089893269 sum 2.42350566
# range, mid point, percentile, count
>= 0.052549 < 0.06 , 0.0562745 , 47.50, 19
>= 0.06 < 0.07 , 0.065 , 92.50, 18
>= 0.07 < 0.08 , 0.075 , 97.50, 2
>= 0.08 <= 0.0898933 , 0.0849466 , 100.00, 1
# target 50% 0.0605556
# target 75% 0.0661111
# target 99% 0.085936
# target 99.9% 0.0894975
Code 200 : 40
Response Header Sizes : count 40 avg 690.475 +/- 15.77 min 592 max 693 sum 27619
Response Body/Total Sizes : count 40 avg 12565.2 +/- 301.9 min 12319 max 13665 sum 502608
All done 40 calls (plus 4 warmup) 60.588 ms avg, 7.9 qps

More info, examples and lots of documentation on Fortio here

Feedback & Contribution

Feel free to provide feedback and contribute networking troubleshooting tools and use-cases by opening PRs. If you would like to add any package, open a PR with the rationale and ensure that you update both the Dockerfile and the README with some examples on how to use it!

Name		Name	Last commit message	Last commit date
Latest commit History 103 Commits
.github		.github
configs		configs
img		img
.bashrc		.bashrc
.dockerignore		.dockerignore
.gitignore		.gitignore
Dockerfile		Dockerfile
LICENSE		LICENSE
README.md		README.md
motd		motd
profile		profile

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

netshoot: a Docker + Kubernetes network trouble-shooting swiss-army container

Kubernetes

Network Problems

Included Packages

Included Networking tools

Included Kubernetes, cloud and container tools

Included text manipulations tools

Included mostly well known system tools

Sample Use-cases

iperf

tcpdump

netstat

nmap

iftop

drill

netcat

hping

netgen

iproute2

nsenter

CTOP

Termshark

Swaks

Grpcurl

Fortio

Feedback & Contribution

About

Releases

Packages

Languages

License

mindw/netshoot

Folders and files

Latest commit

History

Repository files navigation

netshoot: a Docker + Kubernetes network trouble-shooting swiss-army container

Kubernetes

Network Problems

Included Packages

Included Networking tools

Included Kubernetes, cloud and container tools

Included text manipulations tools

Included mostly well known system tools

Sample Use-cases

iperf

tcpdump

netstat

nmap

iftop

drill

netcat

hping

netgen

iproute2

nsenter

CTOP

Termshark

Swaks

Grpcurl

Fortio

Feedback & Contribution

About

Resources

License

Stars

Watchers

Forks

Releases

Packages 0

Languages

Packages