APuP support for LibreMesh

packages/lime-proto-anygw/files/usr/lib/lua/lime/proto/anygw.lua

@@ -139,4 +139,6 @@ protocol direct {
 	return base_conf
 end
 
+function anygw.runOnDevice(linuxDev, args) end
+
 return anygw

packages/lime-proto-babeld/files/usr/lib/lua/lime/proto/babeld.lua

@@ -129,4 +129,18 @@ function babeld.setup_interface(ifname, args)
 	uci:save("babeld")
 end
 
+function babeld.runOnDevice(linuxDev, args)
+	utils.log("lime.proto.babeld.runOnDevice(%s, ...)", linuxDev)
+
+	local vlanId = args[2] or 17
+	local vlanProto = args[3] or "8021ad"
+
+	local vlanDev = network.createVlan(linuxDev, vlanId, vlanProto)
+	network.createStatic(vlanDev)
+
+	local libubus = require("ubus")
+	local ubus = libubus.connect()
+	ubus:call('babeld', 'add_interface', { ifname = vlanDev })
+end
+
 return babeld

packages/lime-proto-batadv/files/usr/lib/lua/lime/proto/batadv.lua

@@ -99,5 +99,42 @@ function batadv.setup_interface(ifname, args)
 	uci:save("network")
 end
 
+function batadv.runOnDevice(linuxDev, args)
+	args = args or {}
+	local vlanId = args[2] or "%N1"
+	local vlanProto = args[3] or "8021ad"
+
+	utils.log("lime.proto.batadv.runOnDevice(%s, ...)", linuxDev)
+
+
+	local mtu = 1532
+
+	if not tonumber(vlanId) then
+		vlanId = 29 + (utils.applyNetTemplate10(vlanId) - 13) % 256
+	end
+
+	local devName = network.createVlan(linuxDev, vlanId, vlanProto)
+	local ifName = network.limeIfNamePrefix..linuxDev .. "_batadv"
+
+	local ifaceConf = {
+		name   = ifName,
+		proto  = "batadv_hardif",
+		auto   = "1",
+		device = devName,
+		master = "bat0"
+	}
+
+	local libubus = require("ubus");
+	local ubus = libubus.connect()
+	ubus:call('network', 'add_dynamic', ifaceConf)
+	ubus:call('network.interface.'..ifName, 'up', {})
+
+
+--! TODO: as of today ubus silently fails to properly setting up a linux network
+--! device for batman ADV usage dinamycally work around it by using
+--! shell commands instead
+	network.createStatic(devName)
+	utils.unsafe_shell("batctl if add "..devName)
+end
 
 return batadv

packages/lime-system/Makefile

@@ -23,7 +23,7 @@ LIME_DESCRIPTION:=$(LIME_ID) $(LIME_RELEASE) $(LIME_CODENAME) ($(LIME_BRANCH) re
 include $(INCLUDE_DIR)/package.mk
 
 define Package/$(PKG_NAME)
-  TITLE:=libremesh system files
+  TITLE:=LibreMesh system core
   CATEGORY:=LibreMesh
   MAINTAINER:=Gioacchino Mazzurco <[email protected]>
   URL:=http://libremesh.org
@@ -32,7 +32,8 @@ define Package/$(PKG_NAME)
 endef
 
 define Package/$(PKG_NAME)/description
-	Basic system files for LiMe node
+	LibreMesh is a modular meta-firmare this package provide the core of it
+	which articulates all LiMe modules around it
 endef
 
 define Build/Compile

packages/lime-system/files/etc/config/lime-defaults

@@ -58,6 +58,7 @@ config lime wifi
 	option apname_ssid 'LibreMesh.org/%H'
 	option adhoc_ssid 'LiMe'
 	option adhoc_bssid 'ca:fe:00:c0:ff:ee'
+	option apup_ssid 'LibreMesh.org'
 	option ieee80211s_mesh_fwding '0'
 	option ieee80211s_mesh_id 'LiMe'
 	option unstuck_interval '10'

packages/lime-system/files/etc/init.d/limed

@@ -0,0 +1,14 @@
+#!/bin/sh /etc/rc.common
+
+USE_PROCD=1
+START=15
+
+start_service()
+{
+	procd_open_instance
+	procd_set_param command /usr/bin/limed
+##	procd_set_param respawn
+	procd_set_param stderr 1
+	procd_set_param term_timeout 10
+	procd_close_instance
+}

packages/lime-system/files/usr/bin/limed

@@ -0,0 +1,87 @@
+#!/usr/bin/lua
+
+--! LibreMesh community mesh networks meta-firmware
+--!
+--! Copyright (C) 2024  Gioacchino Mazzurco <[email protected]>
+--! Copyright (C) 2024  Asociación Civil Altermundi <[email protected]>
+--!
+--! SPDX-License-Identifier: AGPL-3.0-only
+
+local config = require("lime.config")
+
+local limed = {};
+
+limed.__PRIVATE_APUP_ENABLED = nil
+
+function limed.APUP_ENABLED()
+	if limed.__PRIVATE_APUP_ENABLED ~= nil then
+		return limed.__PRIVATE_APUP_ENABLED
+	end
+
+	function check_apup_mode_cb(section)
+		if(section['modes'] == null) then return end
+
+		for _,mode in pairs(section['modes']) do
+			if(mode == 'apup') then
+				limed.__PRIVATE_APUP_ENABLED = true;
+				return limed.__PRIVATE_APUP_ENABLED;
+			end
+		end
+	end
+
+	config.foreach(nil, check_apup_mode_cb)
+	return limed.__PRIVATE_APUP_ENABLED
+end
+
+-- No need to run if APuP is not enabled in configuration
+if not limed.APUP_ENABLED() then os.exit(0) end;
+
+local uloop = require("uloop");
+local network = require("lime.network")
+
+local function dumptable(table, nesting)
+  local nesting = nesting or 1
+  if type(table) ~= "table" then
+    print("dumptable: first argument is expected to be a table but you passed a", type(table), table)
+  else
+    if next(table) == nil then
+      print(table, "empty")
+    else
+      for k,v in pairs(table) do
+        print(string.rep('\t', nesting), k, ' = ', v)
+        if type(v) == 'table' then dumptable(v, nesting+1) end
+      end
+    end
+  end
+end
+
+local libubus = require("ubus")
+local ubus = libubus.connect()
+
+local peerSubscriber = {
+	notify = function(nData, nType)
+		if nType ~= "apup-newpeer" then return end
+
+		print("peerSubscriber:", nType, nData.ifname)
+		network.createStatic(nData.ifname)
+		network.runProtocols(nData.ifname)
+	end
+}
+
+local apupSubscriber = {
+	notify = function(nData, nType)
+		if nType ~= "bss.add" then return end
+
+		local apupDev = string.match(nData["name"], "wlan%d+%-apup");
+		if not apupDev then return end
+
+		local evPath = "hostapd." .. apupDev
+
+		print("Subscribing:", evPath)
+		ubus:subscribe(evPath, peerSubscriber)
+	end
+}
+
+uloop.init();
+ubus:subscribe("hostapd", apupSubscriber)
+uloop.run();

packages/lime-system/files/usr/lib/lua/lime/mode/apup.lua

@@ -0,0 +1,41 @@
+#!/usr/bin/lua
+
+--! LibreMesh community mesh networks meta-firmware
+--!
+--! Copyright (C) 2024  Gioacchino Mazzurco <[email protected]>
+--! Copyright (C) 2024  Asociación Civil Altermundi <[email protected]>
+--!
+--! SPDX-License-Identifier: AGPL-3.0-only
+
+local wireless = require("lime.wireless")
+
+local apup = {}
+
+function apup.WIFI_MODE()
+	return "ap"
+end
+
+function apup.WIFI_MODE_SUFFIX()
+	return "up"
+end
+
+function apup.PEER_SUFFIX()
+	return "peer"
+end
+
+function apup.setup_radio(radio, args)
+--! checks("table", "?table")
+
+	args["network"] = "lan"
+	args["apup"] = "1"
+	args["apup_peer_ifname_prefix"] =
+		wireless.calcIfname(radio[".name"], apup.PEER_SUFFIX(), "")
+
+	return wireless.createBaseWirelessIface(
+		radio, apup.WIFI_MODE(), apup.WIFI_MODE_SUFFIX(), args )
+end
+
+--! TODO: port all modes to .WIFI_MODE()
+apup.wifi_mode="ap"
+
+return apup

packages/lime-system/files/usr/lib/lua/lime/network.lua

@@ -2,8 +2,8 @@
 
 --! LibreMesh community mesh networks meta-firmware
 --!
---! Copyright (C) 2013-2023  Gioacchino Mazzurco <gio@eigenlab.org>
---! Copyright (C) 2023  Asociación Civil Altermundi <[email protected]>
+--! Copyright (C) 2013-2024  Gioacchino Mazzurco <gio@polymathes.cc>
+--! Copyright (C) 2023-2024  Asociación Civil Altermundi <[email protected]>
 --!
 --! SPDX-License-Identifier: AGPL-3.0-only
 
@@ -15,13 +15,21 @@ local fs = require("nixio.fs")
 local config = require("lime.config")
 local utils = require("lime.utils")
 
-network.limeIfNamePrefix="lm_net_"
-network.protoParamsSeparator=":"
-network.protoVlanSeparator="_"
+
+function network.PROTO_PARAM_SEPARATOR() return ":" end
+function network.PROTO_VLAN_SEPARATOR() return "_" end
+function network.LIME_UCI_IFNAME_PREFIX() return "lm_net_" end
+
 
 network.MTU_ETH = 1500
 network.MTU_ETH_WITH_VLAN = network.MTU_ETH - 4
 
+-- Deprecated use corresponding functions instead
+network.protoParamsSeparator=":"
+network.protoVlanSeparator="_"
+network.limeIfNamePrefix="lm_net_"
+
+
 function network.get_mac(ifname)
 	local _, macaddr = next(network.get_own_macs(ifname))
 	return utils.split(macaddr, ":")
@@ -268,7 +276,7 @@ function network.scandevices()
 			end
 		end
 
-		if dev:match("^wlan%d+"..wireless.wifiModeSeparator.."%w+$") then
+		if dev:match("^wlan%d+"..wireless.WIFI_MODE_SEPARATOR().."%w+$") then
 			devices[dev] = {}
 			utils.log( "network.scandevices.dev_parser found WiFi device %s",
 			           dev )
@@ -550,4 +558,94 @@ function network.createMacvlanIface(baseIfname, linuxName, argsDev, argsIf)
 	return owrtInterfaceName, linuxName, owrtDeviceName
 end
 
+--! Create a static interface at runtime via ubus
+function network.createStatic(linuxBaseIfname)
+	local ipv4, ipv6 = network.primary_address()
+	local ubusIfaceName = network.sanitizeIfaceName(
+		network.LIME_UCI_IFNAME_PREFIX()..linuxBaseIfname.."_static")
+	local ifaceConf = {
+		name    = ubusIfaceName,
+		proto   = "static",
+		auto    = "1",
+		ifname  = linuxBaseIfname,
+		ipaddr  = ipv4:host():string(),
+		netmask = "255.255.255.255"
+	}
+
+	print('network', 'add_dynamic')
+	utils.dumptable(ifaceConf)
+
+	local libubus = require("ubus")
+	local ubus = libubus.connect()
+	ubus:call('network', 'add_dynamic', ifaceConf)
+	ubus:call('network.interface.'..ifaceConf.name, 'up', {})
+
+--! TODO: As of today ubus silently fails to properly setup the interface,
+--! subsequent status query return NO_DEVICE error
+--!  ubus -v call network.interface.lm_net_lm_net_wlan0_peer1_static status
+--!  {
+--!          "up": false,
+--!          "pending": false,
+--!          "available": false,
+--!          "autostart": true,
+--!          "dynamic": true,
+--!          "proto": "static",
+--!          "data": {
+--!
+--!          },
+--!          "errors": [
+--!                  {
+--!                          "subsystem": "interface",
+--!                          "code": "NO_DEVICE"
+--!                  }
+--!          ]
+--!  }
+--!
+--! ATM work around the problem configuring IP addresses via ip command
+
+	utils.unsafe_shell("ip link set up dev "..ifaceConf.ifname)
+	utils.unsafe_shell("ip address add "..ifaceConf.ipaddr.."/32 dev "..ifaceConf.ifname)
+
+	return ifaceConf.name
+end
+
+--! Create a vlan at runtime via ubus
+function network.createVlan(linuxBaseIfname, vid, vlanProtocol)
+	local vlanConf = {
+		name   = linuxBaseIfname .. network.PROTO_VLAN_SEPARATOR() .. vid,
+		type   = vlanProtocol or "8021ad",
+		ifname = linuxBaseIfname,
+		vid    = vid
+	}
+
+	utils.log("lime.network.createVlan(%s, ...)", linuxBaseIfname)
+	utils.dumptable(vlanConf)
+
+	local libubus = require("ubus")
+	local ubus = libubus.connect()
+	ubus:call('network', 'add_dynamic_device', vlanConf)
+
+--! TODO: as of today ubus silently fails to properly creating a device
+--! dinamycally work around it by using ip command instead
+	utils.unsafe_shell("ip link add name "..vlanConf.name.." link "..vlanConf.ifname.." type vlan proto 802.1ad id "..vlanConf.vid)
+
+	return vlanConf.name
+end
+
+--! Run protocols at runtime on top of linux network devices
+-- TODO: probably some code between here and configure might be deduplicaded
+function network.runProtocols(linuxBaseIfname)
+	utils.log("lime.network.runProtocols(%s, ...)", linuxBaseIfname)
+	local protoConfs = config.get("network", "protocols")
+	for _,protoConf in pairs(protoConfs) do
+		local args = utils.split(protoConf, network.PROTO_PARAM_SEPARATOR())
+		local protoModule = "lime.proto."..args[1]
+		if utils.isModuleAvailable(protoModule) then
+			local proto = require(protoModule)
+			xpcall(function() proto.runOnDevice(linuxBaseIfname, args) end,
+				   function(errmsg) print(errmsg) ; print(debug.traceback()) end)
+		end
+	end
+end
+
 return network

packages/lime-system/files/usr/lib/lua/lime/proto/adhoc.lua

@@ -26,4 +26,6 @@ function adhoc.setup_interface(ifname, args)
 	end
 end
 
+function adhoc.runOnDevice(linuxDev, args) end
+
 return adhoc

packages/lime-system/files/usr/lib/lua/lime/proto/apbb.lua

@@ -25,4 +25,6 @@ function apbb.setup_interface(ifname, args)
 	end
 end
 
+function apbb.runOnDevice(linuxDev, args) end
+
 return apbb