greenhouse

Image

https://www.raspberrypi.org/documentation/installation/installing-images/linux.md

lsblk -p


sudo umount /dev/sda1
sudo umount /dev/sda2

unzip raspios_lite_armhf_latest
sudo dd if=2020-08-20-raspios-buster-armhf-lite.img of=/dev/sda bs=4M status=progress conv=fsync

## OR DIRECT FROM ZIP
unzip -p raspios_full_armhf_latest | sudo dd of=/dev/sda bs=4M status=progress conv=fsync
##

sudo mount /dev/sda1 /media/pi/

cd /media/pi/

sudo touch ssh

sudo vim wpa_supplicant.conf

sudo sync

cd ..

sudo umount /dev/sda1

ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
update_config=1
country=GB

network={
 ssid=""
 psk=""
}

Log and manual setup

sudo /sbin/ifconfig wlan0 mtu 1036
sudo /etc/init.d/networking restart
sudo apt-get install git -y
git clone https://github.com/jamesdillonharvey/greenhouse.git

install ansible

sudo apt-get install ansible -y

Run ansible

ansible-playbook run.yaml

DHT

From here : https://www.thegeekpub.com/236867/using-the-dht11-temperature-sensor-with-the-raspberry-pi/

Add to ansible

sudo apt-get install python3-dev python3-pip
sudo python3 -m pip install --upgrade pip setuptools wheel
sudo pip3 install Adafruit_DHT

logging for free?

https://io.adafruit.com/