Python Tesla Powerwall API for consuming a local endpoint. The API is by no means complete and mainly features methods which are considered to be of common use. If you feel like methods should be included you are welcome to open an Issue or create a Pull Request.

Note: This is not an official API provided by Tesla and not affilated in anyways with Tesla.

Powerwall Software versions from 1.47.0 to 1.50.1 as well as 20.40 to 22.9.2 are tested, but others will probably work too. If you encounter an error regarding a change in the API of the Powerwall because your Powerwall has a different version than listed here please open an Issue to report this change so it can be fixed.

Table of Contents

• Installation
• Usage
  • Setup
  • Authentication
  • General
    • Errors
    • Response
  • Battery level
  • Capacity
  • Battery Packs
  • Powerwall Status
  • Sitemaster
  • Siteinfo
  • Meters
    • Aggregates
    • Current power supply/draw
    • Energy exported/imported
  • Device Type
  • Grid Status
  • Operation mode
  • Powerwalls Serial Numbers
  • Gateway DIN
  • VIN

Installation

Install the library via pip:

$ pip install tesla_powerwall

Usage

For a basic Overview of the functionality of this library you can take a look at examples/example.py:

$ export POWERWALL_IP=<ip of your Powerwall>
$ export POWERWALL_PASSWORD=<your password>
$ python3 examples/example.py

Setup

from tesla_powerwall import Powerwall

# Create a simple powerwall object by providing the IP
powerwall = Powerwall("<ip of your Powerwall>")
#=> <Powerwall ...>

# Create a powerwall object with more options
powerwall = Powerwall(
    endpoint="<ip of your powerwall>",
    # Configure timeout; default is 10
    timeout=10,
    # Provide a requests.Session or None to have one created
    http_session=None,
    # Whether to verify the SSL certificate or not
    verify_ssl=False,
    disable_insecure_warning=True
)
#=> <Powerwall ...>

Note: By default the API client does not verify the SSL certificate of the Powerwall. If you want to verify the SSL certificate you can set verify_ssl to True. The API client suppresses warnings about an inseucre request (because we aren't verifing the certificate). If you want to enable those warnings you can set disable_insecure_warning to False.

Authentication

Since version 20.49.0 authentication is required for all methods. For that reason you must call login before making a request to the API. When you perform a request without being loggedin a AccessDeniedError will be thrown.

To login you can either use login or login_as. login logs you in as User.CUSTOMER whereas with login_as you can choose a different user:

from tesla_powerwall import User

# Login as customer without email
# The default value for the email is ""
powerwall.login("<password>")
#=> <LoginResponse ...>

# Login as customer with email
powerwall.login("<password>", "<email>")
#=> <LoginResponse ...>

# Login with different user
powerwall.login_as(User.INSTALLER, "<password>", "<email>")
#=> <LoginResponse ...>

# Check if we are logged in
# This method only checks wether a cookie with a Bearer token exists
# It does not verify whether this token is valid
powerwall.is_authenticated()
#=> True

# Logout
powerwall.logout()

General

The API object directly maps the REST endpoints with a python method in the form of <verb>_<path>. So if you need the raw json responses you can use the API object. It can be either created manually or retrived from an existing Powerwall:

from tesla_powerwall import API

# Manually create API object
api = API('https://<ip>/')
# Perform get on 'system_status/soe'
api.get_system_status_soe()
#=> {'percentage': 97.59281925744594}

# From existing powerwall
api = powerwall.get_api()
api.get_system_status_soe()

The Powerwall objet provides a wrapper around the API and exposes common methods.

Errors

As the powerwall REST API varies widley between version and country it may happen that an attribute may not be included in your response. If that is the case a MissingAttributeError will be thrown indicating what attribute wasn't available.

Response

Responses are usally wrapped inside a Response object to provide convenience methods. An Example is the Meter class which is a sublass of Response. Each Response object includes the response member which consists of the plain json response.

from helpers import assert_attribute

status = powerwall.get_status()
#=> <PowerwallStatus ...>

status.version
# is the same as
assert_attribute(status.response, "version")
# or
status.assert_attribute("version")

For retriving the version you could also alternativly use powerwall.get_version.

Battery level

Get charge in percent:

powerwall.get_charge()
#=> 97.59281925744594 (%)

Get charge in watt:

powerwall.get_energy()
#=> 14807 (W)

Capacity

Get the capacity of your powerwall in watt:

powerwall.get_capacity()
#=> 28078 (W)

Battery Packs

Get information about the battery packs that are installed:

batteries = powerwall.get_batteries()
#=> [<Battery ...>, <Battery ...>]
batteries[0].part_number
#=> "XXX-G"
batteries[0].serial_number
#=> "TGXXX"
batteries[0].energy_remaining
#=> 7378 (W)
batteries[0].capacity
#=> 14031 (W)
batteries[0].energy_charged
#=> 5525740 (W)
batteries[0].energy_discharged
#=> 4659550 (W)
batteries[0].wobble_detected
#=> False

Powerwall Status

status = powerwall.get_status()
#=> <PowerwallStatus ...>
status.version
#=> '1.49.0'
status.up_time_seconds
#=> datetime.timedelta(days=13, seconds=63287, microseconds=146455)
status.start_time
#=> datetime.datetime(2020, 9, 23, 23, 31, 16, tzinfo=datetime.timezone(datetime.timedelta(seconds=28800)))
status.device_type
#=> DeviceType.GW2

Sitemaster

sm = powerwall.sitemaster 
#=> <SiteMaster ...>
sm.status 
#=> StatusUp
sm.running
#=> true
sm.connected_to_tesla
#=> true

The sitemaster can be started and stopped using run() and stop()

Siteinfo

info = powerwall.get_site_info()
#=> <SiteInfo ...>
info.site_name
#=> 'Tesla Home'
info.country
#=> 'Germany'
info.nominal_system_energy
#=> 13.5
info.timezone
#=> 'Europe/Berlin'

Meters

Aggregates

from tesla_powerwall import MeterType

meters = powerwall.get_meters()
#=> <MetersAggregates ...>

# access meter, but may return None when meter is not available
meters.get_meter(MeterType.SOLAR)
#=> <Meter ...>

# access meter, but may raise MeterNotAvailableError when the meter is not available at your powerwall (e.g. no solar panels installed)
meters.solar
#=> <Meter ...>

# get all available meters at the current powerwall
meters.meters
#=> [<MeterType.SITE: 'site'>, <MeterType.BATTERY: 'battery'>, <MeterType.LOAD: 'load'>, <MeterType.SOLAR: 'solar'>]

Available meters are: solar, site, load, battery, generator, and busway. Some of those meters might not be available based on the installation and raise MeterNotAvailableError when accessed.

Current power supply/draw

Meter provides different methods for checking current power supply/draw:

meters = powerwall.get_meters()
meters.solar.get_power()
#=> 0.4 (in kWh)
meters.solar.instant_power
#=> 409.941801071167 (in watts)
meters.solar.is_drawing_from()
#=> True
meters.load.is_sending_to()
#=> True
meters.battery.is_active()
#=> False

# Different precision settings might return different results
meters.battery.is_active(precision=5)
#=> True

Note: For MeterType.LOAD is_drawing_from always returns False because it cannot be drawn from load.

Energy exported/imported

Get energy exported/imported in watts with energy_exported and energy_imported. For the values in kWh use get_energy_exported and get_energy_imported:

meters.battery.energy_exported
#=> 6394100
meters.battery.get_energy_exported()
#=> 6394.1
meters.battery.energy_imported
#=> 7576570
meters.battery.get_energy_imported()
#=> 7576.6

Device Type

powerwall.get_device_type()
#=> <DeviceType.GW1: 'hec'>

Grid Status

Get current grid status.

powerwall.get_grid_status()
#=> <GridStatus.Connected: 'SystemGridConnected'>
powerwall.is_grid_services_active()
#=> False

Operation mode

powerwall.get_operation_mode()
#=> <OperationMode.SELF_CONSUMPTION: ...>
powerwall.get_backup_reserve_percentage()
#=> 5.000019999999999

Powerwalls Serial Numbers

serials = powerwall.get_serial_numbers()
#=> ["...", "...", ...]

Gateway DIN

din = powerwall.get_gateway_din()
#=> 4159645-02-A--TGXXX

VIN

vin = powerwall.get_vin()