Initial commitment of clickhouse official image #15846
Conversation
|
This PR is still in draft mode to adjust the automation in ClickHouse/ClickHouse#57203 The branch now is in the WIP mode, so it will be regenerated to the |
|
Interesting case, I am addressing it in our master, which will regenerate the LDF |
|
Unfortunately having the This is why the "Diff Comment" CI job is failing 🙈 |
|
Apologies, I misread the PR -- I think that might actually be failing because it's backfilling too many versions 😅 |
|
Are all of these major.minor combinations still actively supported? (By which I mean that if they had a problem, there would be a new release/update?) |
|
Hi Tianon, thanks for the review! Indeed, the failure of
No, the file for currently supported versions is the following: I've generated all the versions that could be built at the moment, so following the next sentence from README:
It's pretty easy to rebuild the file to any version, so I am very open to advice on what to use as the minimal one. |
Felixoid
force-pushed
the
master
branch
2 times, most recently
from
1f015a0
to
1992f2b
Compare
|
Ah, let's start with just 23.11 (unless there's a significant difference in the Dockerization for older versions) and see if that gets the diff small enough. If we start there and the delta between that and other versions is small, then future diffs will be small too because they'll all diff against the merged version instead of all versions being considered brand new code. |
|
For a small bit of initial Dockerization review, you'll want to take a look at #10794 (Alpine + glibc is going to be a non-starter). Additionally, having Beyond that, please be patient -- new image review requires much higher maintainer bandwidth than update review does, so we do have a backlog. |
Yep, all versions have the same content now
I think it's related to the part
I feel you are referencing https://github.com/ClickHouse/ClickHouse/blob/master/docker/server/entrypoint.sh#L132-L139. It's the bringing the clickhouse-server up for the initial setup of DB. And it has the fuse to check that the server is actually finished after it. The real server works as the only process in the container after exec command. It's similar to docker_temp_server_start, docker_process_init_files, docker_temp_server_stop
Thank you! It's very nice of you to have a transparent process 🙏 |
This comment has been minimized.
This comment has been minimized.
|
Happy New Year, dear colleagues! Is there anything we could do from our site to boost the review, maybe? |
|
Colleagues? It's already three months since the last review round. Is it even possible to add the image to the library? |
|
@tianon Is it possible to have an estimate of when this PR can be reviewed? |
|
We cannot give an estimate, but we will review this PR as soon as we can. Reviewing new DOI submissions is quite time intensive and we have to balance that commitment with ensuring the normal flow of updates to existing DOI. It can help to speed things up if you ensure your PR adheres to our contribution guidelines, https://github.com/docker-library/official-images?tab=readme-ov-file#contributing-to-the-standard-library . We apologize for the delay and truly appreciate your patience through this process. |
This comment has been minimized.
This comment has been minimized.
|
Nice, thank you! Regarding The last thing I see while re-reviewing (that I thought I'd included in my last round but I guess I missed!) was this block: mkdir="clickhouse su ""${USER}:${GROUP}"" mkdir"
fi
if ! $mkdir -p "$dir"; then100% not a blocker, but if you wanted this to quote mkdir='clickhouse su "${USER}:${GROUP}" mkdir'
fi
mkdir+=' -p "$dir"'
if ! eval "$mkdir"; thenor, if you prefer, Bash arrays (which mkdir=( mkdir )
...
mkdir=( clickhouse su "${USER}:${GROUP}" mkdir )
fi
if ! "${mkdir[@]}" -p "$dir"; thenThank you for your patience overall on this -- I'll take a look at the docs PR now. 👀 |
Hmm, what about I change it to the other way around?
|
This comment has been minimized.
This comment has been minimized.
|
I've found when and how Not sure what exactly the issue was with openshift and if we can break it badly. |
|
OpenShift runs the image with a totally random UID ( Re |
So, should we replace |
|
Yeah, that sounds a lot cleaner IMO (and pushes users to the more secure behavior) 👍 🚀 |
This comment has been minimized.
This comment has been minimized.
Diff for fbf8b51:diff --git a/_bashbrew-arches b/_bashbrew-arches
index 8b13789..e85a97f 100644
--- a/_bashbrew-arches
+++ b/_bashbrew-arches
@@ -1 +1,2 @@
-
+amd64
+arm64v8
diff --git a/_bashbrew-cat b/_bashbrew-cat
index bdfae4a..37c2135 100644
--- a/_bashbrew-cat
+++ b/_bashbrew-cat
@@ -1 +1,9 @@
-Maintainers: New Image! :D (@docker-library-bot)
+Maintainers: Misha f. Shiryaev <[email protected]> (@Felixoid), Max Kainov <[email protected]> (@mkaynov), Alexander Sapin <[email protected]> (@alesapin)
+GitRepo: https://github.com/ClickHouse/docker-library.git
+GitFetch: refs/heads/main
+GitCommit: 8f3278549dd6ac2832287c18c6a35a5f90eb3394
+
+Tags: latest, jammy, 24, 24-jammy, 24.10, 24.10-jammy, 24.10.1, 24.10.1-jammy, 24.10.1.2812, 24.10.1.2812-jammy
+Architectures: amd64, arm64v8
+Directory: server/24.10.1.2812
+File: Dockerfile.ubuntu
diff --git a/_bashbrew-list b/_bashbrew-list
index e69de29..9047fc8 100644
--- a/_bashbrew-list
+++ b/_bashbrew-list
@@ -0,0 +1,10 @@
+clickhouse:24
+clickhouse:24-jammy
+clickhouse:24.10
+clickhouse:24.10-jammy
+clickhouse:24.10.1
+clickhouse:24.10.1-jammy
+clickhouse:24.10.1.2812
+clickhouse:24.10.1.2812-jammy
+clickhouse:jammy
+clickhouse:latest
diff --git a/_bashbrew-list-build-order b/_bashbrew-list-build-order
index e69de29..669c034 100644
--- a/_bashbrew-list-build-order
+++ b/_bashbrew-list-build-order
@@ -0,0 +1 @@
+clickhouse:24.10.1.2812-jammy
diff --git a/clickhouse_24.10.1.2812-jammy/Dockerfile.ubuntu b/clickhouse_24.10.1.2812-jammy/Dockerfile.ubuntu
new file mode 100644
index 0000000..54b9722
--- /dev/null
+++ b/clickhouse_24.10.1.2812-jammy/Dockerfile.ubuntu
@@ -0,0 +1,84 @@
+FROM ubuntu:22.04
+
+# see https://github.com/moby/moby/issues/4032#issuecomment-192327844
+# It could be removed after we move on a version 23:04+
+ARG DEBIAN_FRONTEND=noninteractive
+
+# ARG for quick switch to a given ubuntu mirror
+ARG apt_archive="http://archive.ubuntu.com"
+
+# We shouldn't use `apt upgrade` to not change the upstream image. It's updated biweekly
+
+# user/group precreated explicitly with fixed uid/gid on purpose.
+# It is especially important for rootless containers: in that case entrypoint
+# can't do chown and owners of mounted volumes should be configured externally.
+# We do that in advance at the begining of Dockerfile before any packages will be
+# installed to prevent picking those uid / gid by some unrelated software.
+# The same uid / gid (101) is used both for alpine and ubuntu.
+RUN sed -i "s|http://archive.ubuntu.com|${apt_archive}|g" /etc/apt/sources.list \
+ && groupadd -r clickhouse --gid=101 \
+ && useradd -r -g clickhouse --uid=101 --home-dir=/var/lib/clickhouse --shell=/bin/bash clickhouse \
+ && apt-get update \
+ && apt-get install --yes --no-install-recommends \
+ ca-certificates \
+ locales \
+ tzdata \
+ wget \
+ && rm -rf /var/lib/apt/lists/* /var/cache/debconf /tmp/*
+
+ARG REPO_CHANNEL="stable"
+ARG REPOSITORY="deb [signed-by=/usr/share/keyrings/clickhouse-keyring.gpg] https://packages.clickhouse.com/deb ${REPO_CHANNEL} main"
+ARG VERSION="24.10.1.2812"
+ARG PACKAGES="clickhouse-client clickhouse-server clickhouse-common-static"
+
+
+# A fallback to installation from ClickHouse repository
+# It works unless the clickhouse binary already exists
+RUN clickhouse local -q 'SELECT 1' >/dev/null 2>&1 && exit 0 || : \
+ ; apt-get update \
+ && apt-get install --yes --no-install-recommends \
+ dirmngr \
+ gnupg2 \
+ && mkdir -p /etc/apt/sources.list.d \
+ && GNUPGHOME=$(mktemp -d) \
+ && GNUPGHOME="$GNUPGHOME" gpg --batch --no-default-keyring \
+ --keyring /usr/share/keyrings/clickhouse-keyring.gpg \
+ --keyserver hkp://keyserver.ubuntu.com:80 \
+ --recv-keys 3a9ea1193a97b548be1457d48919f6bd2b48d754 \
+ && rm -rf "$GNUPGHOME" \
+ && chmod +r /usr/share/keyrings/clickhouse-keyring.gpg \
+ && echo "${REPOSITORY}" > /etc/apt/sources.list.d/clickhouse.list \
+ && echo "installing from repository: ${REPOSITORY}" \
+ && apt-get update \
+ && for package in ${PACKAGES}; do \
+ packages="${packages} ${package}=${VERSION}" \
+ ; done \
+ && apt-get install --yes --no-install-recommends ${packages} || exit 1 \
+ && rm -rf \
+ /var/lib/apt/lists/* \
+ /var/cache/debconf \
+ /tmp/* \
+ && apt-get autoremove --purge -yq dirmngr gnupg2
+
+# post install
+# we need to allow "others" access to clickhouse folder, because docker container
+# can be started with arbitrary uid (openshift usecase)
+RUN clickhouse-local -q 'SELECT * FROM system.build_options' \
+ && mkdir -p /var/lib/clickhouse /var/log/clickhouse-server /etc/clickhouse-server /etc/clickhouse-client \
+ && chmod ugo+Xrw -R /var/lib/clickhouse /var/log/clickhouse-server /etc/clickhouse-server /etc/clickhouse-client
+
+RUN locale-gen en_US.UTF-8
+ENV LANG en_US.UTF-8
+ENV TZ UTC
+
+RUN mkdir /docker-entrypoint-initdb.d
+
+COPY docker_related_config.xml /etc/clickhouse-server/config.d/
+COPY entrypoint.sh /entrypoint.sh
+
+EXPOSE 9000 8123 9009
+VOLUME /var/lib/clickhouse
+
+ENV CLICKHOUSE_CONFIG /etc/clickhouse-server/config.xml
+
+ENTRYPOINT ["/entrypoint.sh"]
diff --git a/clickhouse_24.10.1.2812-jammy/docker_related_config.xml b/clickhouse_24.10.1.2812-jammy/docker_related_config.xml
new file mode 100644
index 0000000..3025dc2
--- /dev/null
+++ b/clickhouse_24.10.1.2812-jammy/docker_related_config.xml
@@ -0,0 +1,12 @@
+<clickhouse>
+ <!-- Listen wildcard address to allow accepting connections from other containers and host network. -->
+ <listen_host>::</listen_host>
+ <listen_host>0.0.0.0</listen_host>
+ <listen_try>1</listen_try>
+
+ <!--
+ <logger>
+ <console>1</console>
+ </logger>
+ -->
+</clickhouse>
diff --git a/clickhouse_24.10.1.2812-jammy/entrypoint.sh b/clickhouse_24.10.1.2812-jammy/entrypoint.sh
new file mode 100755
index 0000000..2f87008
--- /dev/null
+++ b/clickhouse_24.10.1.2812-jammy/entrypoint.sh
@@ -0,0 +1,222 @@
+#!/bin/bash
+
+set -eo pipefail
+shopt -s nullglob
+
+DO_CHOWN=1
+if [[ "${CLICKHOUSE_RUN_AS_ROOT:=0}" = "1" || "${CLICKHOUSE_DO_NOT_CHOWN:-0}" = "1" ]]; then
+ DO_CHOWN=0
+fi
+
+# CLICKHOUSE_UID and CLICKHOUSE_GID are kept for backward compatibility, but deprecated
+# One must use either "docker run --user" or CLICKHOUSE_RUN_AS_ROOT=1 to run the process as
+# FIXME: Remove ALL CLICKHOUSE_UID CLICKHOUSE_GID before 25.3
+if [[ "${CLICKHOUSE_UID:-}" || "${CLICKHOUSE_GID:-}" ]]; then
+ echo 'WARNING: Support for CLICKHOUSE_UID/CLICKHOUSE_GID will be removed in a couple of releases.' >&2
+ echo 'WARNING: Either use a proper "docker run --user=xxx:xxxx" argument instead of CLICKHOUSE_UID/CLICKHOUSE_GID' >&2
+ echo 'WARNING: or set "CLICKHOUSE_RUN_AS_ROOT=1" ENV to run the clickhouse-server as root:root' >&2
+fi
+
+# support `docker run --user=xxx:xxxx`
+if [[ "$(id -u)" = "0" ]]; then
+ if [[ "$CLICKHOUSE_RUN_AS_ROOT" = 1 ]]; then
+ USER=0
+ GROUP=0
+ else
+ USER="${CLICKHOUSE_UID:-"$(id -u clickhouse)"}"
+ GROUP="${CLICKHOUSE_GID:-"$(id -g clickhouse)"}"
+ fi
+else
+ USER="$(id -u)"
+ GROUP="$(id -g)"
+ DO_CHOWN=0
+fi
+
+# set some vars
+CLICKHOUSE_CONFIG="${CLICKHOUSE_CONFIG:-/etc/clickhouse-server/config.xml}"
+
+# get CH directories locations
+DATA_DIR="$(clickhouse extract-from-config --config-file "$CLICKHOUSE_CONFIG" --key=path || true)"
+TMP_DIR="$(clickhouse extract-from-config --config-file "$CLICKHOUSE_CONFIG" --key=tmp_path || true)"
+USER_PATH="$(clickhouse extract-from-config --config-file "$CLICKHOUSE_CONFIG" --key=user_files_path || true)"
+LOG_PATH="$(clickhouse extract-from-config --config-file "$CLICKHOUSE_CONFIG" --key=logger.log || true)"
+LOG_DIR=""
+if [ -n "$LOG_PATH" ]; then LOG_DIR="$(dirname "$LOG_PATH")"; fi
+ERROR_LOG_PATH="$(clickhouse extract-from-config --config-file "$CLICKHOUSE_CONFIG" --key=logger.errorlog || true)"
+ERROR_LOG_DIR=""
+if [ -n "$ERROR_LOG_PATH" ]; then ERROR_LOG_DIR="$(dirname "$ERROR_LOG_PATH")"; fi
+FORMAT_SCHEMA_PATH="$(clickhouse extract-from-config --config-file "$CLICKHOUSE_CONFIG" --key=format_schema_path || true)"
+
+# There could be many disks declared in config
+readarray -t DISKS_PATHS < <(clickhouse extract-from-config --config-file "$CLICKHOUSE_CONFIG" --key='storage_configuration.disks.*.path' || true)
+readarray -t DISKS_METADATA_PATHS < <(clickhouse extract-from-config --config-file "$CLICKHOUSE_CONFIG" --key='storage_configuration.disks.*.metadata_path' || true)
+
+CLICKHOUSE_USER="${CLICKHOUSE_USER:-default}"
+CLICKHOUSE_PASSWORD_FILE="${CLICKHOUSE_PASSWORD_FILE:-}"
+if [[ -n "${CLICKHOUSE_PASSWORD_FILE}" && -f "${CLICKHOUSE_PASSWORD_FILE}" ]]; then
+ CLICKHOUSE_PASSWORD="$(cat "${CLICKHOUSE_PASSWORD_FILE}")"
+fi
+CLICKHOUSE_PASSWORD="${CLICKHOUSE_PASSWORD:-}"
+CLICKHOUSE_DB="${CLICKHOUSE_DB:-}"
+CLICKHOUSE_ACCESS_MANAGEMENT="${CLICKHOUSE_DEFAULT_ACCESS_MANAGEMENT:-0}"
+
+function create_directory_and_do_chown() {
+ local dir=$1
+ # check if variable not empty
+ [ -z "$dir" ] && return
+ # ensure directories exist
+ if [ "$DO_CHOWN" = "1" ]; then
+ mkdir=( mkdir )
+ else
+ # if DO_CHOWN=0 it means that the system does not map root user to "admin" permissions
+ # it mainly happens on NFS mounts where root==nobody for security reasons
+ # thus mkdir MUST run with user id/gid and not from nobody that has zero permissions
+ mkdir=( clickhouse su "${USER}:${GROUP}" mkdir )
+ fi
+ if ! "${mkdir[@]}" -p "$dir"; then
+ echo "Couldn't create necessary directory: $dir"
+ exit 1
+ fi
+
+ if [ "$DO_CHOWN" = "1" ]; then
+ # ensure proper directories permissions
+ # but skip it for if directory already has proper premissions, cause recursive chown may be slow
+ if [ "$(stat -c %u "$dir")" != "$USER" ] || [ "$(stat -c %g "$dir")" != "$GROUP" ]; then
+ chown -R "$USER:$GROUP" "$dir"
+ fi
+ fi
+}
+
+create_directory_and_do_chown "$DATA_DIR"
+
+# Change working directory to $DATA_DIR in case there're paths relative to $DATA_DIR, also avoids running
+# clickhouse-server at root directory.
+cd "$DATA_DIR"
+
+for dir in "$ERROR_LOG_DIR" \
+ "$LOG_DIR" \
+ "$TMP_DIR" \
+ "$USER_PATH" \
+ "$FORMAT_SCHEMA_PATH" \
+ "${DISKS_PATHS[@]}" \
+ "${DISKS_METADATA_PATHS[@]}"
+do
+ create_directory_and_do_chown "$dir"
+done
+
+# if clickhouse user is defined - create it (user "default" already exists out of box)
+if [ -n "$CLICKHOUSE_USER" ] && [ "$CLICKHOUSE_USER" != "default" ] || [ -n "$CLICKHOUSE_PASSWORD" ] || [ "$CLICKHOUSE_ACCESS_MANAGEMENT" != "0" ]; then
+ echo "$0: create new user '$CLICKHOUSE_USER' instead 'default'"
+ cat <<EOT > /etc/clickhouse-server/users.d/default-user.xml
+ <clickhouse>
+ <!-- Docs: <https://clickhouse.com/docs/en/operations/settings/settings_users/> -->
+ <users>
+ <!-- Remove default user -->
+ <default remove="remove">
+ </default>
+
+ <${CLICKHOUSE_USER}>
+ <profile>default</profile>
+ <networks>
+ <ip>::/0</ip>
+ </networks>
+ <password><![CDATA[${CLICKHOUSE_PASSWORD//]]>/]]]]><![CDATA[>}]]></password>
+ <quota>default</quota>
+ <access_management>${CLICKHOUSE_ACCESS_MANAGEMENT}</access_management>
+ </${CLICKHOUSE_USER}>
+ </users>
+ </clickhouse>
+EOT
+fi
+
+CLICKHOUSE_ALWAYS_RUN_INITDB_SCRIPTS="${CLICKHOUSE_ALWAYS_RUN_INITDB_SCRIPTS:-}"
+
+# checking $DATA_DIR for initialization
+if [ -d "${DATA_DIR%/}/data" ]; then
+ DATABASE_ALREADY_EXISTS='true'
+fi
+
+# run initialization if flag CLICKHOUSE_ALWAYS_RUN_INITDB_SCRIPTS is not empty or data directory is empty
+if [[ -n "${CLICKHOUSE_ALWAYS_RUN_INITDB_SCRIPTS}" || -z "${DATABASE_ALREADY_EXISTS}" ]]; then
+ RUN_INITDB_SCRIPTS='true'
+fi
+
+if [ -n "${RUN_INITDB_SCRIPTS}" ]; then
+ if [ -n "$(ls /docker-entrypoint-initdb.d/)" ] || [ -n "$CLICKHOUSE_DB" ]; then
+ # port is needed to check if clickhouse-server is ready for connections
+ HTTP_PORT="$(clickhouse extract-from-config --config-file "$CLICKHOUSE_CONFIG" --key=http_port --try)"
+ HTTPS_PORT="$(clickhouse extract-from-config --config-file "$CLICKHOUSE_CONFIG" --key=https_port --try)"
+
+ if [ -n "$HTTP_PORT" ]; then
+ URL="http://127.0.0.1:$HTTP_PORT/ping"
+ else
+ URL="https://127.0.0.1:$HTTPS_PORT/ping"
+ fi
+
+ # Listen only on localhost until the initialization is done
+ clickhouse su "${USER}:${GROUP}" clickhouse-server --config-file="$CLICKHOUSE_CONFIG" -- --listen_host=127.0.0.1 &
+ pid="$!"
+
+ # check if clickhouse is ready to accept connections
+ # will try to send ping clickhouse via http_port (max 1000 retries by default, with 1 sec timeout and 1 sec delay between retries)
+ tries=${CLICKHOUSE_INIT_TIMEOUT:-1000}
+ while ! wget --spider --no-check-certificate -T 1 -q "$URL" 2>/dev/null; do
+ if [ "$tries" -le "0" ]; then
+ echo >&2 'ClickHouse init process failed.'
+ exit 1
+ fi
+ tries=$(( tries-1 ))
+ sleep 1
+ done
+
+ clickhouseclient=( clickhouse-client --multiquery --host "127.0.0.1" -u "$CLICKHOUSE_USER" --password "$CLICKHOUSE_PASSWORD" )
+
+ echo
+
+ # create default database, if defined
+ if [ -n "$CLICKHOUSE_DB" ]; then
+ echo "$0: create database '$CLICKHOUSE_DB'"
+ "${clickhouseclient[@]}" -q "CREATE DATABASE IF NOT EXISTS $CLICKHOUSE_DB";
+ fi
+
+ for f in /docker-entrypoint-initdb.d/*; do
+ case "$f" in
+ *.sh)
+ if [ -x "$f" ]; then
+ echo "$0: running $f"
+ "$f"
+ else
+ echo "$0: sourcing $f"
+ # shellcheck source=/dev/null
+ . "$f"
+ fi
+ ;;
+ *.sql) echo "$0: running $f"; "${clickhouseclient[@]}" < "$f" ; echo ;;
+ *.sql.gz) echo "$0: running $f"; gunzip -c "$f" | "${clickhouseclient[@]}"; echo ;;
+ *) echo "$0: ignoring $f" ;;
+ esac
+ echo
+ done
+
+ if ! kill -s TERM "$pid" || ! wait "$pid"; then
+ echo >&2 'Finishing of ClickHouse init process failed.'
+ exit 1
+ fi
+ fi
+else
+ echo "ClickHouse Database directory appears to contain a database; Skipping initialization"
+fi
+
+# if no args passed to `docker run` or first argument start with `--`, then the user is passing clickhouse-server arguments
+if [[ $# -lt 1 ]] || [[ "$1" == "--"* ]]; then
+ # Watchdog is launched by default, but does not send SIGINT to the main process,
+ # so the container can't be finished by ctrl+c
+ CLICKHOUSE_WATCHDOG_ENABLE=${CLICKHOUSE_WATCHDOG_ENABLE:-0}
+ export CLICKHOUSE_WATCHDOG_ENABLE
+
+ # This replaces the shell script with the server:
+ exec clickhouse su "${USER}:${GROUP}" clickhouse-server --config-file="$CLICKHOUSE_CONFIG" "$@"
+fi
+
+# Otherwise, we assume the user want to run his own process, for example a `bash` shell to explore this image
+exec "$@" |
There was a problem hiding this comment.
Still reviewing docker-library/docs#2397 (and we need to merge both together), but this looks solid IMO now ❤️
|
Should we add more images from the supported and/or historical branches in another PR? |
|
Yep, let's do anything else in a follow-up; don't jinx it 😂 ❤️ (from our side, I just want @yosifkit to give this another set of eyes before we pull the trigger) |
&& chmod ugo+Xrw -R /var/lib/clickhouse /var/log/clickhouse-server /etc/clickhouse-server /etc/clickhouse-clientTo minimize duplication across layers, |
|
I can't say how grateful we are for this merge! Seeing it alive is so satisfying I am preparing the follow-up to supported releases |
|
Maybe the thing worth to leave solved here is the I've tested it, and the layer has ~100kB of data. It's On the other hand, we have a lot of different installation steps that aren't in the DOI Dockerfile. Do you consider the following change as enough compromise to keep the line diff --git a/docker/server/Dockerfile.ubuntu b/docker/server/Dockerfile.ubuntu
index 0fe9a409ee4..e6bde845c4e 100644
--- a/docker/server/Dockerfile.ubuntu
+++ b/docker/server/Dockerfile.ubuntu
@@ -113,7 +113,9 @@ RUN clickhouse local -q 'SELECT 1' >/dev/null 2>&1 && exit 0 || : \
/var/lib/apt/lists/* \
/var/cache/debconf \
/tmp/* \
- && apt-get autoremove --purge -yq dirmngr gnupg2
+ && apt-get autoremove --purge -yq dirmngr gnupg2 \
+ && chmod ugo+Xrw -R /etc/clickhouse-server /etc/clickhouse-client
+# The last chmod is here to make the next one is No-op in docker official library DockerfileI checked the |
Hello, dear official library team. Here's our attempt to create an official image
clickhousein the scope of #14136 and ClickHouse/ClickHouse#31473Both the docs and official images PRs are created simultaneously.
docker-library/docs#2397
Checklist for Review
NOTE: This checklist is intended for the use of the Official Images maintainers both to track the status of your PR and to help inform you and others of where we're at. As such, please leave the "checking" of items to the repository maintainers. If there is a point below for which you would like to provide additional information or note completion, please do so by commenting on the PR. Thanks! (and thanks for staying patient with us ❤️)
foobarneeds Node.js, hasFROM node:...instead of grabbingnodevia other means been considered?)ifFROM scratch, tarballs only exist in a single commit within the associated history?