OCS Inventory NG includes a package deployment feature for client computers. From the central management server, you can upload packages which will be downloaded through HTTP/HTTPS and executed by the agent on client computer.
Note: This feature has been tested with OCS Inventory NG Agent for Windows service only. As software installation requires Administrator privileges, agent launched through a login script or shortcut in start menu under user account may not be able to launch software installation. Also, background download of package may take a long time, and may block login script. So, we do not recommend using the package deployment feature when using the login script inventory.
A package has 4 main components:
- A priority
- An action
- A ZIP or TAR.GZ file including how many files and directories you want
- A command to launch
Note : in the case the action is set to "execute" you don't need to upload a file.
There are 11 levels of priority, ranging from level 0 to 10. Level 0 is the highest priority and level 10 the lowest. Package of priority level 0 will be deployed before package of priority 1. Package of priority level 1 will be deployed before package of priority 2…
Action is associated with file to deploy and command to launch. This may be one of the following three commands:
-
Action Launch: to deploy a ZIP or TAR.GZ file and launch with or without parameters an executable file included in ZIP or TAR.GZ file.ZIP or TAR.GZ file will be uncompressed into a temporary directory, and associated command (name of executable file without path!) will be launched into this temporary directory.This action allows retrieving result code of launched command.
-
Action Execute: to deploy a ZIP or TAR.GZ file (optional), and launch with or without parameters an executable file included or not in ZIP or TAR.GZ file.If executable is not included in ZIP or TAR.GZ file, it must be part of software already installed on client computer. Typically, it may be a Windows standard command like Windows Installer call, RPM or DPKG or TAR.GZ command on Linux.ZIP or TAR.GZ file will be uncompressed into a temporary directory, and associated command (name of executable file with path or parameters if needed) will be launched into this temporary directory. This action does not allow retrieving result code of launched command. However, this action allows you running command on client computers, without deploying any file. For example, you can use it to run specific operating system configuration command.
-
Action Store: to deploy a ZIP or TAR.GZ file and only store his content on a folder of client computer. There is no command associated with this action, only a path to specify where to store extracted files.
Note: All packages you want want to deploy must be compressed with ZIP for Windows Agents and tar gzipped for Linux computers.
If you want to build your own installer, you may want to look at NullSoft Installer System (http://nsis.sourceforge.net) or Inno Setup (http://www.jrsoftware.org). These tools are GPL installer for Windows able to create one file self extracting installer.
For example, this feature allows you to create a ZIP package including Media Player Classic executable, a sub directory including some MP3 files and a play list for Media Player Classic referencing these MP3 into sub directory. Associated command will be a call to Media Player Classic with command line switch to launch play list. Once this package will be downloaded on Windows clients, users will have Media Player Classic launched and playing MP3 from play list. Beautiful, isn’t it ;-)
You create your deployment package through the administration console. It is automatically described by:
- A reference in the database, used by Communication server to ask agent to download the package.
- An information file, named “info”. It is an XML file describing the package and action agent will have to launch,
- 0 or more data fragment files. The file you upload (if there is one) will be split into small parts to allow agents downloading part by part, and then easily resuming a failed download. If download of a fragment fails, only this fragment will be downloaded again, instead of the entire package. You will be able to choose fragment size according to your network capabilities.
Note: As you will upload your package through Administration console, you may configure PHP and Apache to allow uploading large files. See § 11.2.4 Uploads size for package deployment to know how to configure this.
Once your package is built, you must activate it. Activation specifies which server(s) the package fragments will be downloaded from. You need to specify an https (ssl) URL for downloading the INFO file, and a HTTP URL for downloading the fragments.
Finally, you must select which computer(s) you will deploy the package to.
When agent send an inventory to Communication server, Communication server tell the agent if he has one or more packages to deploy, with the level of priority of each package, and where it can find information files.
Agent then begins a download period. A period is composed of cycles, defined by configuration option “DOWNLOAD_PERIOD_LENGTH”. By default, a period contains 10 cycles.
At each cycle, the agent computes “cycle’s number modulo package priority”. If it equals to 0, it downloads a fragment file of your package. The agent downloads ONLY ONE fragment of a same package per cycle. The agent will downloads the others fragments of your package each time the result of "cycle’s number modulo package priority” computation will be 0.
After each fragment, the agent will wait “DOWNLOAD_FRAG_LATENCY” (configuration option set to 10 seconds by default).
When all fragments of a cycle are downloaded, the agent will wait “DOWNLOAD_CYCLE_LATENCY” (configuration option set to 60 seconds by default) before beginning a new cycle and increment cycle number.
For example, if you are deploying one package with a priority of 5, the agent would pause for "DOWNLOAD_CYCLE_LATENCY" for cycles 1-4, and then start downloading a fragment of your package when it starts cycle 5.
When all fragments of a package are downloaded, the agent will launch package command the next time the "cycle’s number modulo package priority” computation will be 0.
When all cycles of a period have been processed, it waits “DOWNLOAD_PERIOD_LATENCY” (configuration option set to 0 seconds by default).
If all packages have been successfully downloaded and installed, it stops. If not, it begins a new period of cycles.
Warning: Priority level 0 is a special level. All packages with priority 0 will be downloaded before all others packages with greater priority at the beginning of each cycle. If download fails, agent will retry to download failed packages of priority 0, without checking others package. So it can completely stop deployments.
USE PRIORITY LEVEL 0 WITH CARE!
You may use these settings to customize your network bandwidth usage. By increasing latency options, you will increase time to download fragments and reduce network use average.
By increasing period length option, you will delay new download of failed fragments, but also, by decreasing period length to a value lower than 10, you can stop downloading package with priority level higher than this value.
User can't create packages themself. They need to use static group (and visible) created by admin users.
- The admin create a static group and ckeck the “Visible” checkbox
- The admin affects some packages to this static group (e.g: Firefox)
- The user can put its machines in the created group
Deployement server storing information files must have SSL enabled, as downloading the deployement information file is very critical. This information file contains description of package and command to launch. So, if somebody can usurp your deployement server, he may launch any command he wants on your computers. That’s why deployment server must use SSL to allow agents authenticating the server and ensuring this is the real deployment server.
Agent must have a certificate to validate deployment server authentication. This certificate must be stored in a file named cacert.pem in OCS Inventory NG agent’s folder under Windows, and in directory /etc/ocsinventory-client under Linux.
Under Windows, you can use OCS Inventory NG Packager (see Uploading Agent for deployement through launcher OcsLogon.exe.) to create an agent installer which include certificate, or you can use the following sample login script to copy certificate file in agent’s folder (we assume that agent is installed under C:\Program Files\OCS Inventory Agent and certificate file is available on a share MYSHARE on server MYSERVER).
@echo off
REM Check if CA file exists
if exist “C:\Program Files\OCS Inventory Agent\cacert.pem” goto CA_END
REM CA file does not exists, install it
Copy \\MYSERVER\MYSHARE\cacert.pem “C:\Program Files\OCS Inventory Agent\cacert.pem”
:CA_END
If you have a Public Key Infrastructure, you must create a valid server certificate for your deployment server and copy your Authority certificate file into file cacert.pem.
If you do not have a Public Key Infrastructure, you can use a self signed certificate for your deployement server, and copy server certificate into file cacert.pem.
Refer to § 8.8 Using SSL certificates in Package deployment for more informations.
Warning: You ONLY can upload .zip or .tar.gz files.
First of all, you must build your package.
Point your mouse on Deployment menu and select Build.
Enter a name for your package.
Select operating system for this package. You can choose between Windows and Linux.
Select download protocol for this package. At this time, only HTTP protocol is available.
Select priority on this package. You can choose level 0 to 10 for priority. Package with lesser priority will be downloaded before package of greater priority, except if download fails (cf § 8.7 Deployment statistics and success validation.).
You may also choose to warn user that something is being launched on his computer. Set Warn user dropdown list to YES, fill in text to display to user, how long to display the text before auto validating package installation (set 0 to wait indefinitely) and if user can cancel deployment or delay deployement to next inventory.
You may also specify if package deployment needs a user interaction by setting dropdown list Installation completion need user action to YES, for example, if setup needs that user fill in a informations on a dialog to terminate.
Last, you can select your action in Action dropdown list. Here are some samples describing what kind of package you can build.
Package you want to deploy has one or more files, with at least an executable file for launching package setup. Compress theses files using ZIP tool if package addresses Windows computers, using tar and gzip if package addresses Linux computers.
Choose action Execute and click Browse button to select your ZIP or TAR.GZ file.
In field Command, just fill in name of executable file without path, but with, optionally, parameters. It’s this command which will be launched on client computer once package will be downloaded and uncompressed to a temporary directory.
You could define an interactivity with users.
In our following example, we deploy a new release of OCS Inventory NG Agent for Windows, using silent installation with a .bat file:
Click [ Send ] button to upload package to Administration console.
Next, you must specify the size of each fragment of package to allow agent downloading package by small parts. This will allow download resuming. If download of a fragment fails, only this fragment will be downloaded another time, not all the package. So choose fragment size according to your network capabilities.
Administration console will then split package in fragments and store them in a folder named as package timestamp in directory download of apache web server root directory. It will also create in the same directory the package information file named info, an XML file describing the package and action agent will have to launch.
Package you want to deploy has one or more files, with optionally an executable file for launching package setup. Compress theses files using ZIP tool if package addresses Windows computers, using tar and gzip if package addresses Linux computers.
Choose action Execute and click Browse button to select your ZIP or TAR.GZ file.
In field Command, just fill in path of executable file to launch with parameters (full path is not required as application executable is listed on system search path, or is included in package). It’s this command which will be launched on client computer once package will be downloaded.
Note: Environnement variables are expanded in “Command”. It enables you to use things such as %SystemDrive%, %SystemRoot%, %windir%, %ProgramFiles%, %CommonProgramFiles% ...etc.
In our following example, we deploy software using silent Windows Installer installation. So, ZIP file only include file “software.msi” and the “Command” field contains:
msiexec.exe /i software.msi /quiet
Click [ Send ] button to upload package to Administration console.
Next, you must specify the size of each fragment of package to allow agent downloading package by small parts. This will allow download resuming. If download of a fragment fails, only this fragment will be downloaded another time, not all the package. So choose fragment size according to your network capabilities.
Administration console will then split package in fragments and store them in a folder named as package timestamp in directory download of apache web server root directory. It will also create in the same directory the package information file named info, an XML file describing the package and action agent will have to launch.
Package you want to deploy is only a command launch.
Choose action Execute and leave field File empty.
In field Command, just fill in name of command with, optionally, parameters. It’s this command which will be launched on client computer once package will be downloaded.
Note: Environnement variables are expanded in “Command”. It enables you to use things such as %SystemDrive%, %SystemRoot%, %windir%, %ProgramFiles%, %CommonProgramFiles% ...etc.
In our following example, we deploy a command to specify proxy address to use for System Applications under Windows. So the Command field contains:
Proxycfg.exe /p 192.168.1.1
Click [ Send ] button to upload package to Administration console.
Administration console will only create, in a folder named as package timestamp in directory download of apache web server root directory, the package information file named info, an XML file describing the package and action agent will have to launch.
Package you want to deploy has one or more files, to be stored in a specific folder on client computers. Compress theses files using ZIP tool if package addresses Windows computers, using tar and gzip if package addresses Linux computers.
Choose action Store and click Browse button to select your ZIP or TAR.GZ file.
In field Path, just fill in path where agent will store extracted files once package will be downloaded.
Note: Environnement variables are expanded in “Command”. It enables you to use things such as %SystemDrive%, %SystemRoot%, %windir%, %ProgramFiles%, %CommonProgramFiles% ...etc.
Also, if provided folder path does not exist, it will be recursively created.
In our following example, we deploy a file to store in folder “C:\My Folder”:
Click [ Send ] button to upload package to Administration console.
Next, you must specify the size of each fragment of package to allow agent downloading package by small parts. This will allow download resuming. If download of a fragment fails, only this fragment will be downloaded another time, not all the package. So choose fragment size according to your network capabilities.
Administration console will then split package in fragments and store them in a folder named as package timestamp in directory download of apache web server root directory. It will also create in the same directory the package information file named info, an XML file describing the package and action agent will have to launch.
Once package have been created, you must specify where agent can download it.
Agent will first download package information file. As this file is very critical, this download must be done using HTTP over SSL (HTTPS) to ensure that agent can authenticate deployment server. Next, download of package fragment described in information file will be done using standard HTTP.
Note: If you do not want to use Administration server as deployment server, you must first copy folder “download/package_timestamp” from Administration server Apache document root directory to another web server. You may want to use a directory synchronization utility like rsync (http://samba.anu.edu.au/rsync) to automatically do this task; otherwise, we will have to do it manually.
You may also choose to host information file on a different web server than the one which hosts fragment files. For example, if you have multiple geographical sites with only one central Communication server, you may want to host information files on Communication server, and fragment files on a web server on each site. For this, you need to activate a package per site, and for each package, information file will be hosted on Communication server and fragment files on site web server. This will dramatically decrease intersite network bandwidth use.
Point your mouse on “Deployment” menu and select “Activate”. You will view here all built package, and also ALL activated package.
You can click the red cross to delete a built package. This will delete package reference from database and also delete information file and fragment files from Administration console download directory. So, deleted package will be unavailable for activation, all activated packages using this package will be deleted, and also unaffected from computers.
Click “Active” button on the line corresponding to the package you want to activate.
In field “HTTPS url”, enter URL for download in HTTPS package information file.
In field “HTTP url”, enter URL for downloading in HTTP package fragment files.
Warning: Do not enter localhost as server address in URL! Remenber that these URLs will be processed by agents.
If your HTTPS or HTTP deployement server works on non standard ports, you can specify working port using the standard notation “server_address:server_port/folder”. For example, your deployement server works on port HTTP 8080 and HTTPS 4343 on server 192.168.1.1, and packages are located under /download durectory. You must fill in:
https url: 192.168.1.1:4343/download
http url: 192.168.1.1:8080/download
In our case, we’ve choosen to use Administration server as deployment server for both package information file and package fragments.
So we have filled in in both fill something like “ocs-admin-srv.domain.tld/download”.
Click send button. Administration console will ensure that both information file and package fragment files are available on specified URLs.
“Non notified” column shows you the number of computers which haven’t yet been notified they have corresponding package to deploy.
“Success” column shows you the number of computers which have successfully deploy corresponding package.
“Errors” column shows you the number of computers which encounter errors deploying corresponding package.
The “Stats” icon allows you to view percentile of computers which are waiting for notification, those which are notified (server ask them to deploy the package), and those which have finished deploying with result code (SUCCESS or ERROR).
You can affect package to computer one by one, by displaying computer properties, selecting Customization icon and adding the package. However, this is not the best way if you would like to affect package to many computers.
The best way is to use Search with various creteria functions to search for computers you want, and to affect package to all these computers in one time.
In the following example, we will affect package we’ve created to all Windows computers.
So first, we search for Windows XP computers.
This search returns computers whitch respond to the request.
Two possibilities available :
- Select with check-box computers where you want to deploy package
- Select nothing and click directly on Deploy
Click on Affect icon of package line to affect this package to all selected computers.
Agents on computers will be notified at next Communication Server contact they have this package to deploy. So, while agent do not contact Communication server, computer will appear in console with status WAITING NOTIFICATION. Once agent has contacted Communication server, the status will be NOTIFIED.
For removing the package activation follow the steps below:
-
Point your mouse on Deployment menu and select Activate.
-
List of available (not yet activated) and enabled (activated and ready to be deployed) packages will appear.
Note: If the package is activated, its Name contains hyperlink. -
Click on the link of the package for which you want to remove the activation.
-
New window with package specifications will pop-up.
-
The red cross icon in Delete column will remove the package activation.
Note: Removing the package activation has no affect on any computer where the package has already been installed. Furthermore, the package is still referenced in database, so all information and fragment files are still available in Administration server's download directory. However, it has the same status as if you have just built it.
As package may have been activated and then unactivated, deployment statics are in Activate menu.
You can show deployement statics by clicking Stats icon for a package.
Since you’ve affected package at least to one computer, you will have graphical stats showing deployment notification status.
Status may be once of the following:
| Status code | Meaning |
|---|---|
| WAITING NOTIFICATION | Server is waiting for agent communication to notify there is something to download. |
| NOTIFIED | Agent has been notified there is something to download. Now server waiting for result code. |
| SUCCESS | Agent has successfully download package and launch command or stored extracted data. With “Launch” action, this status may be completed with command execution return code. (return code 0). |
| ERR_EXIT_CODE_xxx | Agent has successfully download package, BUT command of execution or data store associated terminated in error (return code xxx). |
| ERR_ALREADY_SETUP | Package was previously installed successfully on this computer. |
| ERR_BAD_ID | Agent is unable to download package because it cannot find package ID on deployment server. |
| ERR_BAD_DIGEST | Downloaded data are has bad digest, so agent does not execute associated command. |
| ERR_DOWNLOAD_INFO | Agent was unable to download INFO file associated to the package. |
| ERR_DOWNLOAD_PACK | Agent was unable to download ZIP or TAR.GZ file. |
| ERR_BUILD | Agent was unable to rebuild package fragments. |
| ERR_UNZIP | Agent was unable to uncompress downloaded ZIP or TAR.GZ file. |
| ERR_OUT_OF_SPACE | There is not enought space available on disk to uncompress and execute ZIP or TAR.GZ package. |
| ERR_BAD_PARAM | A INFO file parameter of the package is incorrect. |
| ERR_EXECUTE_PACK | Any execution command is specified in INFO file of package. |
| ERR_EXECUTE | Agent was unable to execute associated package command. |
| ERR_CLEAN | Agent was unable to clean downloaded package. |
| ERR_DONE_FAILED | Agent can't retrieve execution result in package cache (cache is used to store result if the server is not responding at the end of package execution). |
| ERR_TIMEOUT | Agent was unable to download package during DOWNLOAD_TIMEOUT days. |
| ERR_ABORTED | User canceled package command execution (you’ve choosen to notify him, and allowed him to cancel). |
“Validating Success” will clear statistics of computers which have successfully deployed package.
“Unaffect not notified” will unaffect package from computers which do not have contacted server since you’ve affected package to computers. Package will not be deleted, only computers which do not have yet receive order to deploy this package will have this order cancelled.
“Validate all” will clear all statistics, and unaffect package from non notified computers. It is the same as Validate Success + Unaffect not notified.
Warning: You MUST validate deployment status once deployment ended to clear database deployment status for computer. Otherwise, database will grow up and speed down !
You can click on number for each status line to display computers having this deployment status.
The package deployment infrastructure is very powerful, so it requires the use of SSL to validate the deployment server before trying to download. So you need some SSL certificates for use with your deployment server.
Certificate definition from http://en.wikipedia.org/wiki/Public_key_certificate
“In cryptography, a public key certificate (or identity certificate) is a certificate which uses a digital signature to bind together a public key with an identity — information such as the name of a person or an organization, their address, and so forth. The certificate can be used to verify that a public key belongs to an individual.
In a typical public key infrastructure (PKI) scheme, the signature will be of a certificate authority (CA). In a web of trust scheme, the signature is of either the user (a self-signed certificate) or other users ("endorsements"). In either case, the signatures on a certificate are attestations by the certificate signer that the identity information and the public key belong together.”
You can use a quick, easy but limited way, self signed certificate, or a more secure and reliable tool, a PKI with a Certificate Authority.
Apache web server comes with OpenSSL cryptographic library, which allow creating and managing certificates.
Warning: Take care about certificate validity period, as web server self signed certificate must be installed on each client computer running the agent. When certificate will expire, you will have to generate and deploy new certificate on each client computer!
Usually, Apache or mod_ssl packages come with sample scripts to generate certificates, especially test certificates.
However, we provide below a sample script using OpenSSL for generating a self signed certificate for use in Apache.
#!/bin/sh
#
# First, generate apache server certificate request
#
# Generate 1024 bits RSA key, store private key in a
# no password protected PEM file server.key, using
# system default openssl configuration file.
#
echo
echo Generating Apache server private key...
echo
openssl genrsa -out server.key 1024
#
# Next, sign the apache server certificate with the apache
# server key
#
# Sign with PEM certificate server.crt, using PEM file
# server.key for server private key, using system default
# openssl configuration file.
#
# The produced certificate will be valid for 1825 days (about 5 years)
#
echo
echo Generating Apache server self signed certificate...
echo
openssl req -outform PEM -new -key server.key -x509 -days 1825 -out server.crt
This script generates a RSA private key in file “server.key” and an X.509 self signed certificate in file “server.crt”.
First, launch this script using command:
sh apache_generate_cert.sh
It will generate private key, and prompt you for certificate properties:
- Country code, usually required
- State or province name, usually required
- City, usually required
- Organisation or company name, usually required
- Organisational Unit name, usually optional
- Common name (this is the DNS name or IP address of your server), required
- An email address, usually optional
In our sample, we’ve generated self signed certificate for our server name “ocs.domain.tld”.
Next, you just have to copy server certificate file “server.crt” and server private key file “server.key” files into appropriate directories and update Apache/mod_ssl configuration files to use these files.
Here is a sample and minimalist Apache/mod_ssl configuration for using SSL under CentOS/Fedora/RedHat Linux. (server certificate is stored under “/etc/httpd/conf/ssl.crt” directory and server key is stored under “/etc/httpd/conf/ssl.key” directory).
Note: Generally, Apache/mod_ssl configuration is provided for your system. So, do not use following configuration if your system already has a configuration file for mod_ssl !
#
# This is the Apache server configuration file providing SSL support.
# It contains the configuration directives to instruct the server how to
# serve pages over an https connection. For detailing information about these
# directives see <URL:http://httpd.apache.org/docs-2.0/mod/mod_ssl.html>
#
# For the moment, see <URL:http://www.modssl.org/docs/> for this info.
# The documents are still being prepared from material donated by the
# modssl project.
#
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
#
LoadModule ssl_module modules/mod_ssl.so
# Until documentation is completed, please check http://www.modssl.org/
# for additional config examples and module docmentation. Directives
# and features of mod_ssl are largely unchanged from the mod_ssl project
# for Apache 1.3.
#
# When we also provide SSL we have to listen to the
# standard HTTP port (see above) and to the HTTPS port
#
# To allow connections to IPv6 addresses add "Listen [::]:443"
#
Listen 0.0.0.0:443
#
# Some MIME-types for downloading Certificates and CRLs
#
AddType application/x-x509-ca-cert .crt
AddType application/x-pkcs7-crl .crl
# Pass Phrase Dialog:
# Configure the pass phrase gathering process.
# The filtering dialog program (`builtin' is a internal
# terminal dialog) has to provide the pass phrase on stdout.
SSLPassPhraseDialog builtin
#
# SSL Virtual Host Context
#
<VirtualHost _default_:443>
# Use separate log files:
ErrorLog logs/ssl_error_log
TransferLog logs/ssl_access_log
# SSL Engine Switch:
# Enable/Disable SSL for this virtual host.
SSLEngine on
# SSL Cipher Suite:
# List the ciphers that the client is permitted to negotiate.
# See the mod_ssl documentation for a complete list.
SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP
# Server Certificate:
# Point SSLCertificateFile at a PEM encoded certificate. If
# the certificate is encrypted, then you will be prompted for a
# pass phrase. Note that a kill -HUP will prompt again. A test
# certificate can be generated with `make certificate' under
# built time. Keep in mind that if you've both a RSA and a DSA
# certificate you can configure both in parallel (to also allow
# the use of DSA ciphers, etc.)
SSLCertificateFile /etc/httpd/conf/ssl.crt/server.crt
# Server Private Key:
# If the key is not combined with the certificate, use this
# directive to point at the key file. Keep in mind that if
# you've both a RSA and a DSA private key you can configure
# both in parallel (to also allow the use of DSA ciphers, etc.)
SSLCertificateKeyFile /etc/httpd/conf/ssl.key/server.key
# SSL Engine Options:
# StdEnvVars:
# This exports the standard SSL/TLS related `SSL_*' environment variables.
# Per default this exportation is switched off for performance reasons,
# because the extraction step is an expensive operation and is usually
# useless for serving static content. So one usually enables the
# exportation for CGI and SSI requests only.
SSLOptions +StdEnvVars
# SSL Protocol Adjustments:
# The safe and default but still SSL/TLS standard compliant shutdown
# approach is that mod_ssl sends the close notify alert but doesn't wait for
# the close notify alert from client. When you need a different shutdown
# approach you can use one of the following variables:
# o ssl-unclean-shutdown:
# This forces an unclean shutdown when the connection is closed, i.e. no
# SSL close notify alert is send or allowed to received. This violates
# the SSL/TLS standard but is needed for some brain-dead browsers. Use
# this when you receive I/O errors because of the standard approach where
# mod_ssl sends the close notify alert.
# o ssl-accurate-shutdown:
# This forces an accurate shutdown when the connection is closed, i.e. a
# SSL close notify alert is send and mod_ssl waits for the close notify
# alert of the client. This is 100% SSL/TLS standard compliant, but in
# practice often causes hanging connections with brain-dead browsers. Use
# this only for browsers where you know that their SSL implementation
# works correctly.
# Notice: Most problems of broken clients are also related to the HTTP
# keep-alive facility, so you usually additionally want to disable
# keep-alive for those clients, too. Use variable "nokeepalive" for this.
# Similarly, one has to force some clients to use HTTP/1.0 to workaround
# their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and
# "force-response-1.0" for this.
SetEnvIf User-Agent ".*MSIE.*" nokeepalive ssl-unclean-shutdown downgrade-1.0 force-response-1.0
# Per-Server Logging:
# The home of a custom SSL log file. Use this when you want a
# compact non-error SSL logfile on a virtual host basis.
CustomLog logs/ssl_request_log "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"
</VirtualHost>
Once you’ve configured your Apache web server, don’t forget to restart Apache daemon for changes to take effect.
Last, you have to install server certificate file “server.crt” on each client computer into OCS Inventory Agent installation directory, under the name “cacert.pem”.
For Debian 9 Stretch:
apt install ssl-cert
a2ensite default-ssl
a2enmod ssl
make-ssl-cert generate-default-snakeoil --force-owerwrite
systemctl restart apache2
copy /etc/ssl/certs/ssl-cert-snakeoil.pem to cacert.pem and distribute
For Fedora/RedHat/Centos 7:
openssl command creates a public certificate and a private key.
openssl genrsa -out server.key 2048
openssl req -new -key server.key -out server.csr
Self-sign the certificate
openssl x509 -req -days 3650 -in server.csr -signkey server.key -out server.crt
Set up the certificate
Place these 2 files in certificates directory
cp server.crt /etc/ssl/certs/
cp server.key /etc/ssl/private/
Set the correct values in /etc/httpd/conf.d/ssl.conf.
We assume that you’re already using an internal PKI or commercial one like Verisign.
However, if you don’t have an internal PKI, and don’t want to pay for certificates, you can use services provided by cacert.org (http://www.cacert.org), a free worldwide PKI provider. Using cacert.org services require that you register your email and DNS domain name, before to be able to request server certificate. See cacert.org manuals.
You may take a look at Pablo Iranzo Gómez excellent article (http://alufis35.uv.es/OCS-Inventory-Package-Deployment.html) for more detailled instructions about using cacert.org certificates in OCS Inventory NG.
Usually, Apache or mod_ssl packages come with sample scripts to generate certificates request to submit to a PKI provider.
However, we provide below a sample script using OpenSSL for generating a certificate request for use in Apache.
#!/bin/sh
#
# Generate server certificate request
#
# Generate 1024 bits RSA key, store private key in a
# no password protected PEM file server.key, store certificate
# request in a PEM file server.csr, using system default
# configuration file
#
# The produced key will be valid for 1825 days (5 years)
#
echo
echo Generating server private key and certificate request...
echo
openssl req -newkey rsa:1024 -outform PEM -out server.csr -keyout server.key -keyform PEM \
-days 1825 -nodes
This script generates a RSA private key in file “server.key” and a certificate request in file “server.csr”.
First, launch this script using command:
sh apache_request_cert.sh
It will generate private key, and prompt you for certificate request properties:
- Country code, usually required
- State or province name, usually required
- City, usually required
- Organisation or company name, usually required
- Organisational Unit name, usually optional
- Common name (this is the DNS name or IP address of your server), required
- An email address, required to receive certificate generated by Certificate Authority.
- An optional challenge password
- An optional company name
In our sample, we’ve generated certificate request for our server name “ocs.domain.tld”.
Next, you must transmit your certificate request “server.csr” to your PKI Certificate Authority.
Once you’ve received your server certificate from Certificate Authority, you just have to copy server certificate file “server.crt” and server private key “server.key” files into appropriate directories, and update Apache/mod_ssl configuration files to use these files.
You must also retreive Certificate Authority root certificate into file “ca_root.crt” to specify it in Apache configuration.
Here is a sample and minimalist Apache/mod_ssl configuration for using SSL under CentOS/Fedora/RedHat Linux. (server certificate is stored under “/etc/httpd/conf/ssl.crt” directory and server key is stored under “/etc/httpd/conf/ssl.key” directory).
Note: Generally, Apache for Win32 comes with a predefined Apache/mod_ssl configuration file. So, do not use following configuration if your system already has a configuration file for mod_ssl !
#
# This is the Apache server configuration file providing SSL support.
# It contains the configuration directives to instruct the server how to
# serve pages over an https connection. For detailing information about these
# directives see <URL:http://httpd.apache.org/docs-2.0/mod/mod_ssl.html>
#
# For the moment, see <URL:http://www.modssl.org/docs/> for this info.
# The documents are still being prepared from material donated by the
# modssl project.
#
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
#
LoadModule ssl_module modules/mod_ssl.so
# Until documentation is completed, please check http://www.modssl.org/
# for additional config examples and module docmentation. Directives
# and features of mod_ssl are largely unchanged from the mod_ssl project
# for Apache 1.3.
#
# When we also provide SSL we have to listen to the
# standard HTTP port (see above) and to the HTTPS port
#
# To allow connections to IPv6 addresses add "Listen [::]:443"
#
Listen 0.0.0.0:443
#
# Some MIME-types for downloading Certificates and CRLs
#
AddType application/x-x509-ca-cert .crt
AddType application/x-pkcs7-crl .crl
# Pass Phrase Dialog:
# Configure the pass phrase gathering process.
# The filtering dialog program (`builtin' is a internal
# terminal dialog) has to provide the pass phrase on stdout.
SSLPassPhraseDialog builtin
##
## SSL Virtual Host Context
##
<VirtualHost _default_:443>
# Use separate log files:
ErrorLog logs/ssl_error_log
TransferLog logs/ssl_access_log
# SSL Engine Switch:
# Enable/Disable SSL for this virtual host.
SSLEngine on
# SSL Cipher Suite:
# List the ciphers that the client is permitted to negotiate.
# See the mod_ssl documentation for a complete list.
SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP
# Server Certificate:
# Point SSLCertificateFile at a PEM encoded certificate. If
# the certificate is encrypted, then you will be prompted for a
# pass phrase. Note that a kill -HUP will prompt again. A test
# certificate can be generated with `make certificate' under
# built time. Keep in mind that if you've both a RSA and a DSA
# certificate you can configure both in parallel (to also allow
# the use of DSA ciphers, etc.)
SSLCertificateFile /etc/httpd/conf/ssl.crt/server.crt
# Server Private Key:
# If the key is not combined with the certificate, use this
# directive to point at the key file. Keep in mind that if
# you've both a RSA and a DSA private key you can configure
# both in parallel (to also allow the use of DSA ciphers, etc.)
SSLCertificateKeyFile /etc/httpd/conf/ssl.key/server.key
# Certificate Authority (CA):
# Set the CA certificate verification path where to find CA
# certificates for client authentication or alternatively one
# huge file containing all of them (file must be PEM encoded)
# Note: Inside SSLCACertificatePath you need hash symlinks
# to point to the certificate files. Use the provided
# Makefile to update the hash symlinks after changes.
#SSLCACertificatePath /etc/httpd/conf/ssl.crt
SSLCACertificateFile /usr/share/ssl/certs/ca_root.crt
# SSL Engine Options:
# StdEnvVars:
# This exports the standard SSL/TLS related `SSL_*' environment variables.
# Per default this exportation is switched off for performance reasons,
# because the extraction step is an expensive operation and is usually
# useless for serving static content. So one usually enables the
# exportation for CGI and SSI requests only.
SSLOptions +StdEnvVars
# SSL Protocol Adjustments:
# The safe and default but still SSL/TLS standard compliant shutdown
# approach is that mod_ssl sends the close notify alert but doesn't wait for
# the close notify alert from client. When you need a different shutdown
# approach you can use one of the following variables:
# o ssl-unclean-shutdown:
# This forces an unclean shutdown when the connection is closed, i.e. no
# SSL close notify alert is send or allowed to received. This violates
# the SSL/TLS standard but is needed for some brain-dead browsers. Use
# this when you receive I/O errors because of the standard approach where
# mod_ssl sends the close notify alert.
# o ssl-accurate-shutdown:
# This forces an accurate shutdown when the connection is closed, i.e. a
# SSL close notify alert is send and mod_ssl waits for the close notify
# alert of the client. This is 100% SSL/TLS standard compliant, but in
# practice often causes hanging connections with brain-dead browsers. Use
# this only for browsers where you know that their SSL implementation
# works correctly.
# Notice: Most problems of broken clients are also related to the HTTP
# keep-alive facility, so you usually additionally want to disable
# keep-alive for those clients, too. Use variable "nokeepalive" for this.
# Similarly, one has to force some clients to use HTTP/1.0 to workaround
# their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and
# "force-response-1.0" for this.
SetEnvIf User-Agent ".*MSIE.*" nokeepalive ssl-unclean-shutdown downgrade-1.0 force-response-1.0
# Per-Server Logging:
# The home of a custom SSL log file. Use this when you want a
# compact non-error SSL logfile on a virtual host basis.
CustomLog logs/ssl_request_log "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"
</VirtualHost>
Once you’ve configured your Apache web server, don’t forget to restart Apache daemon for changes to take effect.
Last, you have to install Certificate Authority root certificate file “ca_root.crt” on each client computer into OCS Inventory Agent installation directory, under the name “cacert.pem”.
##Example: Deploying new version of Service agent for Windows
Create a ZIP “OCS-NG-Windows-Agent-2.0.zip” including file “OCS-NG-Windows-Agent-Setup.exe”.
Next, connect to Administration console and go to menu “Deployment / Build”.
- Fill in package name, for example “Ocs Agent Service 2.0”,
- select target operating system “Windows”,
- select protocol “HTTP”,
- select priority “5”,
- browse to select ZIP file,
- select action “Launch”
- and fill in file name with Service Agent setup command line switches, for example “OcsAgentSetup.exe /S /NOSPLASH /UPGRADE /NP /DEBUG /SERVER:my_ocs_server.domain.tld” (/S to run installer in silent mode, /NOSLPASH to disable installer spash screen, /UPGRADE to indicate that you’re upgrading an already installed Service Agent, /NP to disable use of IE proxy settings, /DEBUG to enable creation of log files, /SERVER to indicate that agent must connect to server at address “my_ocs_server.domain.tld”).
Note: Don’t forget /UPGRADE command line switch to allow upgrading an existing OCS Inventory NG agent installed as a service.
And validate by clicking [ Send ] button..
Next choose fragment size and click [ Send ] button.
Now, deployement package is created. You have to activate it.
Go to menu Deployment / Activate.
Click on button Activate in the corresponding line.
- Fill in HTTPS url where metadata file INFO can be downloaded by agents using HTTPS.
- Fill in HTTP url where fragment files can be downloaded by agent using HTTP.
And click [ Send ] button.
Now, package is ready to be affected to computers.
Go to Search menu, search for computers having Operating System equals to “Windows (ALL)” and click Search button.
Next, click Deploy on Mass processing line.
To finish, click on Affect button in the corresponding line to the package you want.