Skip to content

A Quadrature and half quadrature PCNT peripheral driven encoder library supporting 8 encoders

License

Notifications You must be signed in to change notification settings

brianmichalk1/ESP32Encoder

 
 

Repository files navigation

ESP32Encoder

Build Status

ESP32Encoder library that uses the ESP32 pulse counter hardware peripheral:

https://docs.espressif.com/projects/esp-idf/en/latest/api-reference/peripherals/pcnt.html

There is only one interrupt for the peripheral, and that is managed by the library. The user has no interrupt interface, and no interrupts are generated on each pulse. Interrupts arrive when the 16 bit counter buffer overflows, so this library has a tiny interrupt footprint while providing support for up to 8 simultaneous quadrature encoders.

This hardware peripheral supports only 8 encoders.

Documentation by Doxygen

ESP32Encoder Doxygen

Pull Downs/Ups

To specify the weak pull resistor set the value useInternalWeakPullResistors with the enum types UP, DOWN, or NONE

A note on KY-040 and similar

The "switch style" encoder wheels used by breakout modules such as:

https://usa.banggood.com/KY-040-360-Degrees-Rotary-Encoder-Module-with-1516_5mm-Potentiometer-Rotary-Knob-Cap-for-Brick-Sensor-Switch-p-1677837.html

need electrical debouncing in the range of 0.1 - 2 uf per encoder line to ground. This device bounces much more than the PCNT hardware modules debouncing time limits. Be sure to setFilter() to 1023 as well after attaching in order to get the maximum hardware debouncing.

About

A Quadrature and half quadrature PCNT peripheral driven encoder library supporting 8 encoders

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages

  • C++ 94.6%
  • Shell 5.4%