Skip to content

agentzh/chunkin-nginx-module

Repository files navigation

Name

ngx_chunkin - HTTP 1.1 chunked-encoding request body support for Nginx.

This module is not distributed with the Nginx source. See the installation instructions.

Table of Contents

Status

This module is no longer needed for Nginx 1.3.9+ because since 1.3.9, the Nginx core already has built-in support for the chunked request bodies.

And this module is now only maintained for Nginx versions older than 1.3.9.

Version

This document describes ngx_chunkin v0.23 released on February 8, 2013.

Synopsis

  chunkin on;
  
  error_page 411 = @my_411_error;
  location @my_411_error {
      chunkin_resume;
  }
  
  location /foo {
      # your fastcgi_pass/proxy_pass/set/if and
      # any other config directives go here...
  }
  ...
  chunkin on;
  
  error_page 411 = @my_411_error;
  location @my_411_error {
      chunkin_resume;
  }
  
  location /bar {
    chunkin_keepalive on;  # WARNING: too experimental!
    
    # your fastcgi_pass/proxy_pass/set/if and
    # any other config directives go here...
  }

Back to TOC

Description

This module adds HTTP 1.1 chunked input support for Nginx without the need of patching the Nginx core.

Behind the scene, it registers an access-phase handler that will eagerly read and decode incoming request bodies when a Transfer-Encoding: chunked header triggers a 411 error page in Nginx. For requests that are not in the chunked transfer encoding, this module is a "no-op".

To enable the magic, just turn on the chunkin config option and define a custom 411 error_page using chunkin_resume, like this:

  server {
    chunkin on;

    error_page 411 = @my_411_error;
    location @my_411_error {
        chunkin_resume;
    }

    ...
  }

No other modification is required in your nginx.conf file and everything should work out of the box including the standard proxy module (except for those known issues). Note that the chunkin directive is not allowed in the location block while the chunkin_resume directive is only allowed on in locations.

The core module's client_body_buffer_size, client_max_body_size, and client_body_timeout directive settings are honored. Note that, the "body sizes" here always indicate chunked-encoded body, not the data that has already been decoded. Basically, the chunked-encoded body will always be slightly larger than the original data that is not encoded.

The client_body_in_file_only and client_body_in_single_buffer settings are followed partially. See Know Issues.

This module is not supposed to be merged into the Nginx core because I've used Ragel to generate the chunked encoding parser for joy :)

Back to TOC

How it works

Nginx explicitly checks chunked Transfer-Encoding headers and absent content length header in its very early phase. Well, as early as the ngx_http_process_request_header function. So this module takes a rather tricky approach. That is, use an output filter to intercept the 411 Length Required error page response issued by ngx_http_process_request_header, fix things and finally issue an internal redirect to the current location, thus starting from those phases we all know and love, this time bypassing the horrible ngx_http_process_request_header function.

In the rewrite phase of the newly created request, this module eagerly reads in the chunked request body in a way similar to that of the standard ngx_http_read_client_request_body function, but using its own chunked parser generated by Ragel. The decoded request body will be put into r->request_body->bufs and a corresponding Content-Length header will be inserted into r->headers_in.

Those modules using the standard ngx_http_read_client_request_body function to read the request body will just work out of box because ngx_http_read_client_request_body returns immediately when it sees r->request_body->bufs already exists.

Special efforts have been made to reduce data copying and dynamic memory allocation.

Back to TOC

Directives

Back to TOC

chunkin

syntax: chunkin on|off

default: off

context: http, server

phase: access

Enables or disables this module's hooks.

Back to TOC

chunkin_resume

syntax: chunkin_resume

default: no

context: location

phase: content

This directive must be used in your custom 411 error page location to help this module work correctly. For example:

  error_page 411 = @my_error;
  location @my_error {
      chunkin_resume;
  }

For the technical reason behind the necessity of this directive, please read the nginx-devel thread Content-Length is not ignored for chunked requests: Nginx violates RFC 2616.

This directive was first introduced in the v0.17 release.

Back to TOC

chunkin_max_chunks_per_buf

syntax: chunkin_max_chunks_per_buf <number>

default: 512

context: http, server, location

Set the max chunk count threshold for the buffer determined by the client_body_buffer_size directive. If the average chunk size is 1 KB and your client_body_buffer_size setting is 1 meta bytes, then you should set this threshold to 1024 or 2048.

When the raw body size is exceeding client_body_buffer_size or the chunk counter is exceeding this chunkin_max_chunks_per_buf setting, the decoded data will be temporarily buffered into disk files, and then the main buffer gets cleared and the chunk counter gets reset back to 0 (or 1 if there's a "pending chunk").

This directive was first introduced in the v0.17 release.

Back to TOC

chunkin_keepalive

syntax: chunkin_keepalive on|off

default: off

context: http, server, location, if

Turns on or turns off HTTP 1.1 keep-alive and HTTP 1.1 pipelining support.

Keep-alive without pipelining should be quite stable but pipelining support is very preliminary, limited, and almost untested.

This directive was first introduced in the v0.07 release.

Technical note on the HTTP 1.1 pipeling support

The basic idea is to copy the bytes left by my chunked parser in r->request_body->buf over into r->header_in so that nginx's ngx_http_set_keepalive and ngx_http_init_request functions will pick it up for the subsequent pipelined requests. When the request body is small enough to be completely preread into the r->header_in buffer, then no data copy is needed here -- just setting r->header_in->pos correctly will suffice.

The only issue that remains is how to enlarge r->header_in when the data left in r->request_body->buf is just too large to be hold in the remaining room between r->header_in->pos and r->header_in->end. For now, this module will just give up and simply turn off r->keepalive.

I know we can always use exactly the remaining room in r->header_in as the buffer size when reading data from c->recv, but's suboptimal when the remaining room in r->header_in happens to be very small while r->request_body->buf is quite large.

I haven't fully grokked all the details among r->header_in, c->buffer, busy/free lists and those so-called "large header buffers". Is there a clean and safe way to reallocate or extend the r->header_in buffer?

Back to TOC

Installation

Grab the nginx source code from nginx.org, for example, the version 1.2.6 (see nginx compatibility), and then build the source with this module:

wget 'http://nginx.org/download/nginx-1.2.6.tar.gz'
tar -xzvf nginx-1.2.6.tar.gz
cd nginx-1.2.6/

# Here we assume you would install you nginx under /opt/nginx/.
./configure --prefix=/opt/nginx \
    --add-module=/path/to/chunkin-nginx-module
 
make -j2
make install

Download the latest version of the release tarball of this module from chunkin-nginx-module file list.

Back to TOC

Installation on Ubuntu 10.04 LTS using apt/dpkg

You need to have dpkg-dev installed (apt-get install dpkg-dev) And this guide assumes we are using the official repo.

sudo -s
apt-get source nginx
apt-get build-dep nginx
wget 'https://github.com/agentzh/chunkin-nginx-module/tarball/v0.23rc2'
tar -xzvf v0.23rc2

#rename directory to make it easier to remember later.
mv agentzh-chunkin-* chunkin

#this next one of course will change depending on which repo/version you are using.
cd nginx-1.0.14/
vim debian/rules

#See the ./configure section (for both "override_dh_auto_build": and "configure_debug:")
#At this point it's a good idea to have a idea of what you will need of modules/addons. remove any lines you don't need.
#The current last item in the ./configure section needs to have '\' added.
#Then add this: --add-module=../chunkin

dpkg-buildpackage

cd ..
#the next one of course will change according to version/build
dpkg -i nginx_1.0.14-1~lucid_i386.deb

#verify install with nginx -V see that add-module=../chunkin is in the configurea arguemnts list.

Back to TOC

For Developers

The chunked parser is generated by Ragel. If you want to regenerate the parser's C file, i.e., src/chunked_parser.c, use the following command from the root of the chunkin module's source tree:

$ ragel -G2 src/chunked_parser.rl

Back to TOC

Packages from users

Back to TOC

Fedora 13 RPM files

The following source and binary rpm files are contributed by Ernest Folch, with nginx 0.8.54, ngx_chunkin v0.21 and ngx_headers_more v0.13:

Back to TOC

Nginx Compatibility

The following versions of Nginx should work with this module:

  • 1.2.x (last tested: 1.2.6)
  • 1.1.x (last tested: 1.1.5)
  • 1.0.x (last tested: 1.0.10)
  • 0.8.x (last tested: 0.8.54)
  • 0.7.x >= 0.7.21 (last tested: 0.7.67)

Earlier versions of Nginx like 0.6.x and 0.5.x will not work.

If you find that any particular version of Nginx above 0.7.21 does not work with this module, please consider reporting a bug.

Back to TOC

Community

Back to TOC

English Mailing List

The openresty-en mailing list is for English speakers.

Back to TOC

Chinese Mailing List

The openresty mailing list is for Chinese speakers.

Back to TOC

Bugs and Patches

Please submit bug reports, wishlists, or patches by

  1. creating a ticket on the GitHub Issue Tracker,
  2. or posting to the OpenResty community.

Back to TOC

Source Repository

Available on github at agentzh/chunkin-nginx-module.

Back to TOC

ChangeLog

Back to TOC

v0.22

  • now we remove the request header Transfer-Encoding completely because at least Apache will complain about the empty-value Transfer-Encoding request header. thanks hoodoos and Sandesh Kotwal.
  • now we allow DELETE requests with chunked request bodies per hoodoos's request.
  • now we use the 2-clause BSD license.

Back to TOC

v0.21

  • applied a patch from Gong Kaihui (龚开晖) to always call post_handler in ngx_http_chunkin_read_chunked_request_body.

Back to TOC

v0.20

  • fixed a bug that may read incomplete chunked body. thanks Gong Kaihui (龚开晖).
  • fixed various memory issues in the implementation which may cause nginx processes to crash.
  • added support for chunked PUT requests.
  • now we always require "error_page 411 @resume" and no default (buggy) magic any more. thanks Gong Kaihui (龚开晖).

Back to TOC

v0.19

  • we now use ragel -G2 to generate the chunked parser and we're 36% faster.
  • we now eagerly read the data octets in the chunked parser and we're 43% faster.

Back to TOC

v0.18

  • added support for chunk-extension to the chunked parser as per RFC 2616, but we just ignore them (if any) because we don't understand them.
  • added more diagnostic information for certain error messages.

Back to TOC

v0.17

  • implemented the chunkin_max_chunks_per_buf directive to allow overriding the default 512 setting.
  • we now bypass nginx's discard requesty body bug by requiring our users to define explicit 411 error_page with chunkin_resume in the error page location. Thanks J for reporting related bugs.
  • fixed r->phase_handler in our post read handler. our handler may run one more time before :P
  • the chunkin handler now returns NGX_DECLINED rather than NGX_OK when our ngx_http_chunkin_read_chunked_request_body function returns NGX_OK, to avoid bypassing other access-phase handlers.

Back to TOC

v0.16

  • turned off ddebug in the previous release. thanks J for reporting it.

Back to TOC

v0.15

  • fixed a regression that ctx->chunks_count never incremented in earlier versions.

Back to TOC

v0.14

  • now we no longer skip those operations between the (interrupted) ngx_http_process_request_header and the server rewrite phase. this fixed the security issues regarding the internal directive as well as SSL sessions.
  • try to ignore CR/LF/SP/HT at the begining of the chunked body.
  • now we allow HT as padding spaces and ignore leading CRLFs.
  • improved diagnostic info in the error.log messages when parsefail occurs.

Back to TOC

v0.11

  • added a random valid-chunked-request generator in t/random.t.
  • fixed a new connection leak issue caught by t/random.t.

Back to TOC

v0.10

  • fixed a serious bug in the chunked parser grammer: there would be ambiguity when CRLF appears in the chunked data sections. Thanks J for reporting it.

Back to TOC

v0.08

  • fixed gcc compilation errors on x86_64, thanks J for reporting it.
  • used the latest Ragel 6.6 to generate the chunked_parser.c file in the source tree.

Back to TOC

v0.07

  • marked the disgarded 411 error page's output chain bufs as consumed by setting buf->pos = buf->last. (See this nginx-devel thread for more details.)

  • added the chunkin_keepalive directive which can enable HTTP 1.1 keep-alive and HTTP 1.1 pipelining, and defaults to off.

  • fixed the alphtype bug in the Ragel parser spec; which caused rejection of non-ascii octets in the chunked data. Thanks J for his bug report.

  • added Test::Nginx::Socket to test our nginx module on the socket level. Thanks J for his bug report.

  • rewrote the bufs recycling part and preread-buf-to-rb-buf transition part, also refactored the Ragel parser spec, thus eliminating lots of serious bugs.

  • provided better diagnostics in the error log message for "bad chunked body" parsefails in the chunked parser. For example:

    2009/12/02 17:35:52 [error] 32244#0: *1 bad chunked body (offset 7, near "4^M hell <-- HERE o^M 0^M ^M ", marked by " <-- HERE "). , client: 127.0.0.1, server: localhost, request: "POST /main HTTP/1.1", host: "localhost"

  • added some code to let the chunked parser handle special 0-size chunks that are not the last chunk.

  • fixed a connection leak bug regarding incorrect r->main->count reference counter handling for nginx 0.8.11+ (well, the ngx_http_read_client_request_body function in the nginx core also has this issue, I'll report it later.)

Back to TOC

v0.06

  • minor optimization: we won't traverse the output chain link if the chain count is not large enough.

Back to TOC

Test Suite

This module comes with a Perl-driven test suite. The test cases are declarative too. Thanks to the Test::Base module in the Perl world.

To run it on your side:

$ cd test
$ PATH=/path/to/your/nginx-with-chunkin-module:$PATH prove -r t

You need to terminate any Nginx processes before running the test suite if you have changed the Nginx server binary.

At the moment, LWP::UserAgent is used by the test scaffold for simplicity.

Because a single nginx server (by default, localhost:1984) is used across all the test scripts (.t files), it's meaningless to run the test suite in parallel by specifying -jN when invoking the prove utility.

Some parts of the test suite requires modules proxy and echo to be enabled as well when building Nginx.

Back to TOC

Known Issues

  • May not work with certain 3rd party modules like the upload module because it implements its own request body reading mechanism.
  • "client_body_in_single_buffer on" may not be obeyed for short contents and fast network.
  • "client_body_in_file_only on" may not be obeyed for short contents and fast network.
  • HTTP 1.1 pipelining may not fully work yet.

Back to TOC

TODO

  • make the chunkin handler run at the end of the access phase rather than beginning.
  • add support for trailers as specified in the RFC 2616.
  • fix the known issues.

Back to TOC

Getting involved

You'll be very welcomed to submit patches to the author or just ask for a commit bit to the source repository on GitHub.

Back to TOC

Author

Yichun "agentzh" Zhang (章亦春) <[email protected]>, OpenResty Inc.

This wiki page is also maintained by the author himself, and everybody is encouraged to improve this page as well.

Back to TOC

Copyright & License

The basic client request body reading code is based on the ngx_http_read_client_request_body function and its utility functions in the Nginx 0.8.20 core. This part of code is copyrighted by Igor Sysoev.

Copyright (c) 2009-2017, Yichun Zhang (agentzh), OpenResty Inc.

This module is licensed under the terms of the BSD license.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

  • Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
  • Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
  • Neither the name of the Taobao Inc. nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Back to TOC

See Also

About

HTTP 1.1 chunked-encoding request body support for Nginx

Resources

Stars

Watchers

Forks

Packages

No packages published

Languages