Skip to content

Capture network traffic and output it in JSON format

License

Notifications You must be signed in to change notification settings

adriancostin6/CapJSON

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

25 Commits
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

CapJSON

Command line tool for capturing network packets and storing them in JSON format.

Getting started

To get a local copy of this repository run:

git clone https://github.com/adriancostin6/CapJSON.git

Dependencies

This project has the following dependencies:

  • libtins
  • rapidjson

libtins

In order for the packet capture functionality to work, this project requires libtins. Instructions for setting up this library is provided below.

Linux / *NIX operating systems:

The easiest way to get the library would be through your package manager if it is available, if not follow the steps below to build it from source.

  1. Go to the repository source directory: cd CapJSON
  2. Make a directory for the external dependencies: mkdir external
  3. Clone the libtins repository and build the source code and install the library
cd external
git clone https://github.com/mfontanini/libtins.git
cd libtins
mkdir build && cd build 
cmake ../ -DLIBTINS_BUILD_SHARED=0 -DLIBTINS_ENABLE_CXX11=1
make && make install
Windows

Building libtins on Windows is done similarly, using Visual Studio. The only additional requierment is for you to download the WinPCAP developer pack and place it inside the external directory.

cd CapJSON/external
git clone https://github.com/mfontanini/libtins.git
cd libtins
mkdir build && cd build 
cmake ../ -DLIBTINS_BUILD_SHARED=0 -DLIBTINS_ENABLE_CXX11=1 -DPCAP_ROOT_DIR=../../WpdPack

After running these commands inside the shell you will have a Visual Studio solution from where you can build the tins project to generate the static library.

rapidjson

rapidjson is a header only library, so you only need the include folder.

cd CapJSON/external
git clone https://github.com/Tencent/rapidjson.git

After doing this, the CMake build configuration of the project wil automatically detect where the include directory for rapidjson is located.

Building

After sorting out the dependencies and placing them in the external directory we can finally start building the project.

Linux / *NIX operating systems

cd CapJSON && mkdir build && cd build
cmake ../
make

After running the commands listed above you should have an executable to run the application. Do note that you need to give elevated privileges if you want to use the packet capture functionality.

Windows

cd CapJSON && mkdir build && cd build
cmake ../

After running the commands listed above you can build the application by using the Visual Studio solution or by running the following command: cmake --build . --config Release

The recommended build configuration is Release x64.

Once the executable has been generated, don't forget to run it with elevated privileges if you want to use the packet capture functionality.

About

Capture network traffic and output it in JSON format

Topics

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published