Skip to content

ZONESTAR3D/Firmware

Repository files navigation

🌐 Choose Language (Translated by google)


Firmware file for ZONESTAR 3D printer

NOTE:If you find any question, please feel free to contact us by email: [email protected]


ZONESTAR 3D Printer Firmware download link:


How to Upload Firmware

ATTETION:Please distinguish the control board model before upload firmware

For ZM3E2/ZM3E4 32-bit control board

🎥 How to download firmware bin(Hex) file and copy to SD card

  1. Download the zip file and unzip it, you will got a firmware.bin file
  2. Copy firmware.bin to the root directory of Micro-SD card
  3. Power off the printer and plug the Micro-SD card into card socket of the control board
  4. Power on the printer, wait about 30 seconds
  5. Reset the EEPROM after uploaded firmware:
    • For LCD12864: "MENU>>Configuration>>Advanced setting>>initialize EEPROM"
    • For LCD_DWIN: "MENU>>Control>>Restore Defaults"

For ZRIB & ZMIB 8-bit control board

  1. Download firmware upgrade tool: ⬇️.
  2. Download HEX file and copy the hex file to the same directory with the tool.
  3. Unzip "Arduloader.zip" , there is a user guide"Arduloader_user_guide.pdf" in this zip file, please read it.
  4. Connect the printer to your PC, please make sure the driver has been installed correctly.
  5. Follow "Arduloader_user_guide.pdf" to upload the firmware to your control board.

If your printer model is Z9M2, Z9M3, D805S, D806, please find the firmware from the below link:

About

Firmware for ZONESTAR 3D printer

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages