Initial commit for Cors System Organisation

vendor/corssystem/cortu-gen-2.yaml

@@ -0,0 +1,192 @@
+name: CorTU Genesis 2 # Device name can not contain the vendor name
+description: Remote Data Acquisition Board with Support for LoRaWAN and RF
+
+# Hardware versions (optional, use when you have revisions)
+hardwareVersions:
+ - version: '1.0'
+ numeric: 1
+ - version: '1.0-rev-A'
+ numeric: 2
+
+# Firmware versions (at least one is mandatory)
+firmwareVersions:
+ - # Firmware version
+ version: '1.0'
+ numeric: 1
+ # Corresponding hardware versions (optional)
+ hardwareVersions:
+ - '1.0'
+
+ # Firmware features (optional)
+ # Valid values are: remote rejoin (trigger a join from the application layer), transmission interval (configure how
+ # often he device sends a message).
+ features:
+ - remote rejoin
+ - transmission interval
+
+ # LoRaWAN Device Profiles per region
+ # Supported regions are EU863-870, US902-928, AU915-928, AS923, CN779-787, EU433, CN470-510, KR920-923, IN865-867,
+ # RU864-870
+ profiles:
+ EU863-870:
+ # Optional identifier of the vendor of the profile. When you specify the vendorID, the profile is loaded from
+ # the vendorID's folder. This allows you to reuse profiles from module or LoRaWAN end device stack vendors.
+ # If vendorID is empty, the current vendor ID is used. In this example, the vendorID is the current vendor ID,
+ # which is verbose.
+ # vendorID: example
+ # Identifier of the profile (lowercase, alphanumeric with dashes, max 36 characters)
+ id: cortugenesis-profile
+ # lorawanCertified: true
+ codec: cortugenesis-codec
+ US902-928:
+ id: cortugenesis-profile
+ # lorawanCertified: true
+ codec: cortugenesis-codec
+
+ # - # You can add more firmware versions and use different profiles per version
+ # version: '2.0'
+ # numeric: 2
+ # hardwareVersions:
+ # - '1.0-rev-A'
+ # profiles:
+ # EU863-870:
+ # id: windsensor-profile
+ # codec: windsensor-codec
+ # US902-928:
+ # id: windsensor-profile
+ # lorawanCertified: true
+ # codec: windsensor-codec
+ # AS923:
+ # id: windsensor-profile
+ # codec: windsensor-codec
+
+# Type of device (optional)
+# Valid values are: devkit, module, cots
+deviceType: cots
+
+# Sensors that this device features (optional)
+# Valid values are:
+# 4-20 ma, accelerometer, altitude, analog input, auxiliary, barometer, battery, button, bvoc, co, co2, conductivity, current, digital input,
+# digital output, dissolved oxygen, distance, dust, energy, gps, gyroscope, h2s, hall effect, humidity, iaq, infrared, leaf wetness, level,
+# light, lightning, link, magnetometer, moisture, motion, nfc, no, no2, o3, occupancy, optical meter, particulate matter, ph, pir,
+# pm2.5, pm10, potentiometer, power, precipitation, pressure, proximity, pulse count, pulse frequency, radar, rainfall, reed switch, rssi,
+# sap flow, smart valve, smoke, snr, so2, solar radiation, sound, strain, surface temperature, switch, temperature, tilt, time, turbidity,
+# tvoc, uv, vapor pressure, velocity, vibration, voltage, water potential, water, weight, wifi ssid, wind direction, wind speed.
+sensors:
+ - 4-20 ma
+ - analog input
+ - digital input
+
+# Additional radios that this device has (optional)
+# Valid values are: ble, nfc, wifi, cellular.
+# additionalRadios:
+# - ble
+# - cellular
+
+# Bridge interfaces (optional)
+# Valid values are: modbus, m-bus, can bus, rs-485, sdi-12, analog, ethernet.
+bridgeInterfaces:
+ - modbus
+ - rs-485
+ - analog
+
+# Dimensions in mm (optional)
+# Use width, height, length and/or diameter
+dimensions:
+ width: 110
+ length: 110
+ height: 40
+
+# Weight in grams (optional)
+weight: 350
+
+# Battery information (optional)
+# battery:
+# replaceable: true
+# type: AA
+
+# Operating conditions (optional)
+operatingConditions:
+ # Temperature (Celsius)
+ temperature:
+ min: -30
+ max: 85
+ # Relative humidity (fraction of 1)
+ relativeHumidity:
+ min: 0
+ max: 0.97
+
+# IP rating (optional)
+# ipCode: IP64
+
+# Key provisioning (optional)
+# Valid values are: custom (user can configure keys), join server and manifest.
+keyProvisioning:
+ - custom
+ - join server
+
+# Key programming (optional)
+# Valid values are: bluetooth, nfc, wifi, ethernet (via a webpage), serial (when the user has a serial interface to set the keys)
+# and firmware (when the user should change the firmware to set the keys).
+keyProgramming:
+ - serial
+ - firmware
+
+# Key security (optional)
+# Valid values are: none, read protected and secure element.
+keySecurity: none
+
+# Firmware programming (optional)
+# Valid values are: serial (when the user has a serial interface to update the firmware), ethernet, fuota lorawan (when the device
+# supports LoRaWAN FUOTA via standard interfaces) and fuota other (other wireless update mechanism).
+firmwareProgramming:
+ - serial
+ # - fuota lorawan
+
+# Product and data sheet URLs (optional)
+productURL: https://corssystem.com/products/cortu-v1-0/
+# dataSheetURL: https://example.org/wind-sensor/datasheet.pdf
+# Link to simple, easy onboarding instructions for the device (optional).
+# Please do not use this for marketing or overly technical documents like a data sheet.
+# onboardingGuideURL: https://www.thethingsindustries.com/docs/devices/models/windsensor
+
+# Commercial information
+# resellerURLs:
+# - name: 'Reseller 1'
+# region: # valid regions are: Argentina, Australia, Brazil, Canada, China, European Union, India, Indonesia.
+# # Japan, Mexico, Russia, Saudi Arabia, South Africa, South Korea, Turkey, United States, Other
+# - European Union
+# url: https://example.org/reseller1
+# - name: 'Reseller 2'
+# region:
+# - United States
+# - Canada
+# url: https://example.org/reseller2
+# msrp:
+# EUR: 90
+# USD: 120
+
+# Photos
+photos:
+ main: cortugenesis.png # Image needs to have a transparent background
+ # other:
+ # - windsensor-package.png # Image needs to have a transparent background
+# Youtube or Vimeo Video (optional)
+# videos:
+# main: https://www.youtube.com/watch?v=JHzxcD2oEn8
+
+# Regulatory compliances (optional)
+# compliances:
+# safety:
+# - body: IEC
+# norm: EN
+# standard: 62368-1
+# radioEquipment:
+# - body: ETSI
+# norm: EN
+# standard: 301 489-1
+# version: 2.2.0
+# - body: ETSI
+# norm: EN
+# standard: 301 489-3
+# version: 2.1.0

vendor/corssystem/cortu-gen-3.yaml

@@ -0,0 +1,192 @@
+name: Wind Sensor # Device name can not contain the vendor name
+description: Wind Sensor with controllable LED
+
+# Hardware versions (optional, use when you have revisions)
+hardwareVersions:
+ - version: '1.0'
+ numeric: 1
+ - version: '1.0-rev-A'
+ numeric: 2
+
+# Firmware versions (at least one is mandatory)
+firmwareVersions:
+ - # Firmware version
+ version: '1.0'
+ numeric: 1
+ # Corresponding hardware versions (optional)
+ hardwareVersions:
+ - '1.0'
+
+ # Firmware features (optional)
+ # Valid values are: remote rejoin (trigger a join from the application layer), transmission interval (configure how
+ # often he device sends a message).
+ features:
+ - remote rejoin
+ - transmission interval
+
+ # LoRaWAN Device Profiles per region
+ # Supported regions are EU863-870, US902-928, AU915-928, AS923, CN779-787, EU433, CN470-510, KR920-923, IN865-867,
+ # RU864-870
+ profiles:
+ EU863-870:
+ # Optional identifier of the vendor of the profile. When you specify the vendorID, the profile is loaded from
+ # the vendorID's folder. This allows you to reuse profiles from module or LoRaWAN end device stack vendors.
+ # If vendorID is empty, the current vendor ID is used. In this example, the vendorID is the current vendor ID,
+ # which is verbose.
+ # vendorID: example
+ # Identifier of the profile (lowercase, alphanumeric with dashes, max 36 characters)
+ id: windsensor-profile
+ lorawanCertified: true
+ codec: windsensor-codec
+ US902-928:
+ id: windsensor-profile
+ lorawanCertified: true
+ codec: windsensor-codec
+
+ - # You can add more firmware versions and use different profiles per version
+ version: '2.0'
+ numeric: 2
+ hardwareVersions:
+ - '1.0-rev-A'
+ profiles:
+ EU863-870:
+ id: windsensor-profile
+ lorawanCertified: true
+ codec: windsensor-codec
+ US902-928:
+ id: windsensor-profile
+ lorawanCertified: true
+ codec: windsensor-codec
+ AS923:
+ id: windsensor-profile
+ codec: windsensor-codec
+
+# Type of device (optional)
+# Valid values are: devkit, module, cots
+deviceType: cots
+
+# Sensors that this device features (optional)
+# Valid values are:
+# 4-20 ma, accelerometer, altitude, analog input, auxiliary, barometer, battery, button, bvoc, co, co2, conductivity, current, digital input,
+# digital output, dissolved oxygen, distance, dust, energy, gps, gyroscope, h2s, hall effect, humidity, iaq, infrared, leaf wetness, level,
+# light, lightning, link, magnetometer, moisture, motion, nfc, no, no2, o3, occupancy, optical meter, particulate matter, ph, pir,
+# pm2.5, pm10, potentiometer, power, precipitation, pressure, proximity, pulse count, pulse frequency, radar, rainfall, reed switch, rssi,
+# sap flow, smart valve, smoke, snr, so2, solar radiation, sound, strain, surface temperature, switch, temperature, tilt, time, turbidity,
+# tvoc, uv, vapor pressure, velocity, vibration, voltage, water potential, water, weight, wifi ssid, wind direction, wind speed.
+sensors:
+ - wind direction
+ - wind speed
+
+# Additional radios that this device has (optional)
+# Valid values are: ble, nfc, wifi, cellular.
+# additionalRadios:
+# - ble
+# - cellular
+
+# Bridge interfaces (optional)
+# Valid values are: modbus, m-bus, can bus, rs-485, sdi-12, analog, ethernet.
+bridgeInterfaces:
+ - m-bus
+ - rs-485
+
+# Dimensions in mm (optional)
+# Use width, height, length and/or diameter
+dimensions:
+ width: 34
+ length: 26
+ height: 77
+
+# Weight in grams (optional)
+weight: 350
+
+# Battery information (optional)
+battery:
+ replaceable: true
+ type: AA
+
+# Operating conditions (optional)
+operatingConditions:
+ # Temperature (Celsius)
+ temperature:
+ min: -30
+ max: 85
+ # Relative humidity (fraction of 1)
+ relativeHumidity:
+ min: 0
+ max: 0.97
+
+# IP rating (optional)
+ipCode: IP64
+
+# Key provisioning (optional)
+# Valid values are: custom (user can configure keys), join server and manifest.
+keyProvisioning:
+ - custom
+ - join server
+
+# Key programming (optional)
+# Valid values are: bluetooth, nfc, wifi, ethernet (via a webpage), serial (when the user has a serial interface to set the keys)
+# and firmware (when the user should change the firmware to set the keys).
+keyProgramming:
+ - serial
+ - firmware
+
+# Key security (optional)
+# Valid values are: none, read protected and secure element.
+keySecurity: none
+
+# Firmware programming (optional)
+# Valid values are: serial (when the user has a serial interface to update the firmware), ethernet, fuota lorawan (when the device
+# supports LoRaWAN FUOTA via standard interfaces) and fuota other (other wireless update mechanism).
+firmwareProgramming:
+ - serial
+ - fuota lorawan
+
+# Product and data sheet URLs (optional)
+productURL: https://example.org/wind-sensor
+dataSheetURL: https://example.org/wind-sensor/datasheet.pdf
+# Link to simple, easy onboarding instructions for the device (optional).
+# Please do not use this for marketing or overly technical documents like a data sheet.
+onboardingGuideURL: https://www.thethingsindustries.com/docs/devices/models/windsensor
+
+# Commercial information
+resellerURLs:
+ - name: 'Reseller 1'
+ region: # valid regions are: Argentina, Australia, Brazil, Canada, China, European Union, India, Indonesia.
+ # Japan, Mexico, Russia, Saudi Arabia, South Africa, South Korea, Turkey, United States, Other
+ - European Union
+ url: https://example.org/reseller1
+ - name: 'Reseller 2'
+ region:
+ - United States
+ - Canada
+ url: https://example.org/reseller2
+msrp:
+ EUR: 90
+ USD: 120
+
+# Photos
+photos:
+ main: windsensor.png # Image needs to have a transparent background
+ other:
+ - windsensor-package.png # Image needs to have a transparent background
+
+# Youtube or Vimeo Video (optional)
+videos:
+ main: https://www.youtube.com/watch?v=JHzxcD2oEn8
+
+# Regulatory compliances (optional)
+compliances:
+ safety:
+ - body: IEC
+ norm: EN
+ standard: 62368-1
+ radioEquipment:
+ - body: ETSI
+ norm: EN
+ standard: 301 489-1
+ version: 2.2.0
+ - body: ETSI
+ norm: EN
+ standard: 301 489-3
+ version: 2.1.0