PCB Installation

PCB Installation

The borad should be connected to the wires coming from the LCD cable.

This description takes as reference the 6 wire connector. Below an image showing the LCD connector on the Controller side.

Function 6 pin Cable color Controller TX - LCD RX Brown Controller RX - LCD TX Orange +Battery Green +LCD White Ground Black Brake (not used) Violet

• The Power connector is a JST XH type 3 Pin (2,54 mm pitch)
• The optional Themperature Sensor Connector is a JST GH type 3 Pin (1,25 mm pitch)
• The Controller/LCD connector is a JST GH type 4 Pin (1,25 mm pitch)

The relative cable with matching connectors could be easly found. (e.g. search on Aliexpress JST XH or JST GH )

The antenna connector is a UF.L (IPEX) connector. The Antenna should be suited for 2.4GHz (bluetooth) operation. Search on Aliexpress UF.L (or IPEX) wire Antenna 2.4GHz.

Wiring Scheme