Detail changes

resources/profiles/Qidi/filament/fdm_filament_abs.json

@@ -5,7 +5,7 @@
  "instantiation": "false",
  "inherits": "fdm_filament_common",
  "activate_chamber_temp_control": [
- "1"
+ "0"
  ],
  "cool_plate_temp" : [
  "90"

resources/profiles/Qidi/filament/fdm_filament_asa.json

@@ -5,7 +5,7 @@
  "instantiation": "false",
  "inherits": "fdm_filament_common",
  "activate_chamber_temp_control": [
- "1"
+ "0"
  ],
  "cool_plate_temp" : [
  "90"

resources/profiles/Qidi/filament/fdm_filament_pla.json

@@ -96,12 +96,6 @@
  ],
  "enable_overhang_bridge_fan": [
  "0"
- ],
- "filament_z_hop_types": [
- "Spiral Lift"
- ],
- "filament_wipe_distance": [
- "2"
  ]
 
 }

resources/profiles/Qidi/machine/Qidi Q1 Pro 0.4 nozzle.json

@@ -54,7 +54,7 @@
  ],
  "wipe_distance": [
  "2"],
- "single_extruder_multi_material": "0",
+ "single_extruder_multi_material": "1",
  "change_filament_gcode": "",
  "machine_pause_gcode": "M0",
  "thumbnails": [

resources/profiles/Qidi/machine/Qidi X-CF Pro 0.4 nozzle.json

@@ -94,7 +94,7 @@
  "deretraction_speed": [
  "0"
  ],
- "single_extruder_multi_material": "0",
+ "single_extruder_multi_material": "1",
  "change_filament_gcode": "",
  "machine_pause_gcode": "M0",
  "default_filament_profile": [

resources/profiles/Qidi/machine/Qidi X-Max 3 0.4 nozzle.json

@@ -42,7 +42,7 @@
  "extruder_clearance_radius": "70",
  "extruder_clearance_height_to_rod": "30",
  "extruder_clearance_height_to_lid": "118",
- "single_extruder_multi_material": "0",
+ "single_extruder_multi_material": "1",
  "change_filament_gcode": "",
  "machine_pause_gcode": "M0",
  "default_filament_profile": [

resources/profiles/Qidi/machine/Qidi X-Plus 3 0.4 nozzle.json

@@ -38,7 +38,7 @@
  "deretraction_speed": [
  "0"
  ],
- "single_extruder_multi_material": "0",
+ "single_extruder_multi_material": "1",
  "change_filament_gcode": "",
  "machine_pause_gcode": "M0",
  "default_filament_profile": [

resources/profiles/Qidi/machine/Qidi X-Plus 4 0.4 nozzle.json

@@ -58,7 +58,7 @@
  ],
  "wipe_distance": [
  "2"],
- "single_extruder_multi_material": "0",
+ "single_extruder_multi_material": "1",
  "change_filament_gcode": "",
  "machine_pause_gcode": "M0",
  "thumbnails": [

resources/profiles/Qidi/machine/Qidi X-Smart 3 0.4 nozzle.json

@@ -44,7 +44,7 @@
  "140x140/COLPIC",
  "110x110/PNG"
  ],
- "single_extruder_multi_material": "0",
+ "single_extruder_multi_material": "1",
  "change_filament_gcode": "",
  "machine_pause_gcode": "M0",
  "default_filament_profile": [

resources/profiles/Qidi/machine/fdm_machine_common.json

@@ -105,12 +105,12 @@
  "retraction_speed": [
  "30"
  ],
- "single_extruder_multi_material": "0",
+ "single_extruder_multi_material": "1",
  "change_filament_gcode": "",
  "wipe": [
  "1"
  ],
- "z_lift_type": "AutoLift",
+ "z_hop_types": ["Auto Lift"],
  "default_print_profile": "",
  "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
  "machine_start_gcode": "G28\nG0 Z50 F600\nM190 S[first_layer_bed_temperature]\nG28 Z\nG29 ; mesh bed leveling ,comment this code to close it\nG0 X0 Y0 Z50 F6000\nM109 S[first_layer_temperature]\nM83\nG0 Z5 F1200\nG0 X{first_layer_print_min[0]} Y{max(0, first_layer_print_min[1] - 2)} F12000\nG0 Z0.2 F600\nG1 E3 F1800\nG0 Z0.3 F600\nG1 X{min(first_layer_print_min[0] + 30,print_bed_max[0])} E6 F600",

resources/profiles/Qidi/process/fdm_process_qidi_x3_common.json

@@ -18,7 +18,7 @@
  "compatible_printers_condition": "",
  "print_sequence": "by layer",
  "default_acceleration": "10000",
- "bridge_no_support": "1",
+ "bridge_no_support": "0",
  "draft_shield": "disabled",
  "elefant_foot_compensation": "0.15",
  "enable_arc_fitting": "0",
@@ -115,6 +115,7 @@
  "internal_solid_infill_pattern": "zig-zag",
  "initial_layer_travel_speed": "50%",
  "filter_out_gap_fill": "2",
+ "small_perimeter_threshold": "4",
  "notes": "If you want to use Orca's chamber temperature control feature, check that printer.cfg has added the following M191 macro.\nTo add it: go to Fluidd web interface--configuration, copy the following code to the top of the printer.cfg document, SAVE&RESATART \n\n[gcode_macro M191]\ngcode:\n {% set s = params.S|float %}\n {% if s == 0 %}\n # If target temperature is 0, do nothing\n M117 Chamber heating cancelled\n {% else %}\n SET_HEATER_TEMPERATURE HEATER=chamber_heater TARGET={s}\n # Orca: uncomment the following line if you want to use heat bed to assist chamber heating\n M140 S90\n TEMPERATURE_WAIT SENSOR=\"heater_generic chamber_heater\" MINIMUM={s-1} MAXIMUM={s+1}\n M117 Chamber at target temperature\n {% endif %}",
  "exclude_object": "1"
 }