General improvments to RatRig V-Core 4 & V-Core 4 HYBRID (#5966)

Resolves #5932

**The following changes made are made to all V-Core 4 versions** 

- Improved cover's quality 

![after](https://github.com/SoftFever/OrcaSlicer/assets/103969142/ecc22214-4e5e-4286-9baf-ce67e67912c7)
- Added RatRig's PunkFil ABS, PETG, and PETG CF filaments
- Added PETG-CF10 filament type & RatRig to filament vendors
- Increased max z speed to 200 from 50 and max acceleration travel to
10,000 from 9,000
- Enabled wipe and z hop, as well as, increased retract before wipe to
70% from 0%
- Improved layer change G-Code
- Fixed pause G-Code
- Added extruder clearance parameters 

*Almost all of these changes come from @nameisCruzCruz in #5932

resources/profiles/Ratrig.json

@@ -235,6 +235,18 @@
  {
  "name": "RatRig Generic PA-CF",
  "sub_path": "filament/RatRig Generic PA-CF.json"
+ },
+ {
+ "name": "RatRig PunkFil ABS",
+ "sub_path": "filament/RatRig PunkFil ABS.json"
+ },
+ {
+ "name": "RatRig PunkFil PETG CF",
+ "sub_path": "filament/RatRig PunkFil PETG CF.json"
+ },
+ {
+ "name": "RatRig PunkFil PETG",
+ "sub_path": "filament/RatRig PunkFil PETG.json"
  }
  ],
  "machine_list": [

resources/profiles/Ratrig/filament/RatRig PunkFil ABS.json

@@ -0,0 +1,96 @@
+{
+ "type": "filament",
+ "filament_id": "GFB99",
+ "setting_id": "GFSA04",
+ "name": "RatRig PunkFil ABS",
+ "from": "system",
+ "instantiation": "true",
+ "inherits": "fdm_filament_abs",
+ "filament_flow_ratio": [
+ "0.92"
+ ],
+ "filament_max_volumetric_speed": [
+ "40"
+ ],
+ "filament_z_hop": [
+ "nil"
+ ],
+ "enable_pressure_advance": [
+ "1"
+ ],
+ "pressure_advance": [
+ "0.022"
+ ],
+ "hot_plate_temp_initial_layer" : [
+ "110"
+ ],
+ "hot_plate_temp" : [
+ "110"
+ ],
+ "nozzle_temperature_initial_layer": [
+ "260"
+ ],
+ "nozzle_temperature": [
+ "260"
+ ],
+ "close_fan_the_first_x_layers": [
+ "2"
+ ],
+ "fan_cooling_layer_time": [
+ "7"
+ ],
+ "fan_max_speed": [
+ "60"
+ ],
+ "fan_min_speed": [
+ "30"
+ ],
+ "overhang_fan_speed": [
+ "60"
+ ],
+ "overhang_fan_threshold": [
+ "25%"
+ ],
+ "slow_down_min_speed": [
+ "50"
+ ],
+ "slow_down_layer_time": [
+ "2"
+ ],
+ "slow_down_for_layer_cooling": [
+ "1"
+ ],
+ "filament_cost": [
+ "25.5"
+ ],
+ "filament_vendor": [
+ "RatRig"
+ ],
+ "compatible_printers": [
+ "RatRig V-Core 3 200 0.4 nozzle",
+ "RatRig V-Core 3 300 0.4 nozzle",
+ "RatRig V-Core 3 400 0.4 nozzle",
+ "RatRig V-Core 3 500 0.4 nozzle",
+ "RatRig V-Minion 0.4 nozzle",
+ "RatRig V-Cast 0.4 nozzle",
+ "RatRig V-Cast 0.6 nozzle",
+ "RatRig V-Core 4 300 0.4 nozzle",
+ "RatRig V-Core 4 400 0.4 nozzle",
+ "RatRig V-Core 4 500 0.4 nozzle",
+ "RatRig V-Core 4 HYBRID 300 0.4 nozzle",
+ "RatRig V-Core 4 HYBRID 400 0.4 nozzle",
+ "RatRig V-Core 4 HYBRID 500 0.4 nozzle",
+ "RatRig V-Core 4 300 0.5 nozzle",
+ "RatRig V-Core 4 400 0.5 nozzle",
+ "RatRig V-Core 4 500 0.5 nozzle",
+ "RatRig V-Core 4 HYBRID 300 0.5 nozzle",
+ "RatRig V-Core 4 HYBRID 400 0.5 nozzle",
+ "RatRig V-Core 4 HYBRID 500 0.5 nozzle",
+ "RatRig V-Core 4 300 0.6 nozzle",
+ "RatRig V-Core 4 400 0.6 nozzle",
+ "RatRig V-Core 4 500 0.6 nozzle",
+ "RatRig V-Core 4 HYBRID 300 0.6 nozzle",
+ "RatRig V-Core 4 HYBRID 400 0.6 nozzle",
+ "RatRig V-Core 4 HYBRID 500 0.6 nozzle"
+ ]
+}

resources/profiles/Ratrig/filament/RatRig PunkFil PETG CF.json

@@ -0,0 +1,99 @@
+{
+ "type": "filament",
+ "filament_id": "GFB99",
+ "setting_id": "GFSA04",
+ "name": "RatRig PunkFil PETG CF",
+ "from": "system",
+ "instantiation": "true",
+ "inherits": "fdm_filament_pet",
+ "filament_flow_ratio": [
+ "0.93"
+ ],
+ "filament_max_volumetric_speed": [
+ "20"
+ ],
+ "filament_z_hop": [
+ "nil"
+ ],
+ "enable_pressure_advance": [
+ "1"
+ ],
+ "pressure_advance": [
+ "0.038"
+ ],
+ "hot_plate_temp_initial_layer" : [
+ "80"
+ ],
+ "hot_plate_temp" : [
+ "80"
+ ],
+ "nozzle_temperature_initial_layer": [
+ "230"
+ ],
+ "nozzle_temperature": [
+ "230"
+ ],
+ "close_fan_the_first_x_layers": [
+ "2"
+ ],
+ "fan_cooling_layer_time": [
+ "10"
+ ],
+ "fan_max_speed": [
+ "30"
+ ],
+ "fan_min_speed": [
+ "0"
+ ],
+ "overhang_fan_speed": [
+ "40"
+ ],
+ "overhang_fan_threshold": [
+ "50%"
+ ],
+ "slow_down_min_speed": [
+ "30"
+ ],
+ "slow_down_layer_time": [
+ "8"
+ ],
+ "slow_down_for_layer_cooling": [
+ "1"
+ ],
+ "filament_cost": [
+ "48"
+ ],
+ "filament_type": [
+ "PETG-CF10"
+ ],
+ "filament_vendor": [
+ "RatRig"
+ ],
+ "compatible_printers": [ 
+ "RatRig V-Core 3 200 0.4 nozzle",
+ "RatRig V-Core 3 300 0.4 nozzle",
+ "RatRig V-Core 3 400 0.4 nozzle",
+ "RatRig V-Core 3 500 0.4 nozzle",
+ "RatRig V-Minion 0.4 nozzle",
+ "RatRig V-Cast 0.4 nozzle",
+ "RatRig V-Cast 0.6 nozzle",
+ "RatRig V-Core 4 300 0.4 nozzle",
+ "RatRig V-Core 4 400 0.4 nozzle",
+ "RatRig V-Core 4 500 0.4 nozzle",
+ "RatRig V-Core 4 HYBRID 300 0.4 nozzle",
+ "RatRig V-Core 4 HYBRID 400 0.4 nozzle",
+ "RatRig V-Core 4 HYBRID 500 0.4 nozzle",
+ "RatRig V-Core 4 300 0.5 nozzle",
+ "RatRig V-Core 4 400 0.5 nozzle",
+ "RatRig V-Core 4 500 0.5 nozzle",
+ "RatRig V-Core 4 HYBRID 300 0.5 nozzle",
+ "RatRig V-Core 4 HYBRID 400 0.5 nozzle",
+ "RatRig V-Core 4 HYBRID 500 0.5 nozzle",
+ "RatRig V-Core 4 300 0.6 nozzle",
+ "RatRig V-Core 4 400 0.6 nozzle",
+ "RatRig V-Core 4 500 0.6 nozzle",
+ "RatRig V-Core 4 HYBRID 300 0.6 nozzle",
+ "RatRig V-Core 4 HYBRID 400 0.6 nozzle",
+ "RatRig V-Core 4 HYBRID 500 0.6 nozzle"
+ ]
+}

resources/profiles/Ratrig/filament/RatRig PunkFil PETG.json

@@ -0,0 +1,96 @@
+{
+ "type": "filament",
+ "filament_id": "GFB99",
+ "setting_id": "GFSA04",
+ "name": "RatRig PunkFil PETG",
+ "from": "system",
+ "instantiation": "true",
+ "inherits": "fdm_filament_pet",
+ "filament_flow_ratio": [
+ "0.93"
+ ],
+ "filament_max_volumetric_speed": [
+ "40"
+ ],
+ "filament_z_hop": [
+ "nil"
+ ],
+ "enable_pressure_advance": [
+ "1"
+ ],
+ "pressure_advance": [
+ "0.025"
+ ],
+ "hot_plate_temp_initial_layer" : [
+ "80"
+ ],
+ "hot_plate_temp" : [
+ "80"
+ ],
+ "nozzle_temperature_initial_layer": [
+ "235"
+ ],
+ "nozzle_temperature": [
+ "235"
+ ],
+ "close_fan_the_first_x_layers": [
+ "2"
+ ],
+ "fan_cooling_layer_time": [
+ "8"
+ ],
+ "fan_max_speed": [
+ "60"
+ ],
+ "fan_min_speed": [
+ "30"
+ ],
+ "overhang_fan_speed": [
+ "50"
+ ],
+ "overhang_fan_threshold": [
+ "50%"
+ ],
+ "slow_down_min_speed": [
+ "50"
+ ],
+ "slow_down_layer_time": [
+ "2"
+ ],
+ "slow_down_for_layer_cooling": [
+ "1"
+ ],
+ "filament_cost": [
+ "24.5"
+ ],
+ "filament_vendor": [
+ "RatRig"
+ ],
+ "compatible_printers": [
+ "RatRig V-Core 3 200 0.4 nozzle",
+ "RatRig V-Core 3 300 0.4 nozzle",
+ "RatRig V-Core 3 400 0.4 nozzle",
+ "RatRig V-Core 3 500 0.4 nozzle",
+ "RatRig V-Minion 0.4 nozzle",
+ "RatRig V-Cast 0.4 nozzle",
+ "RatRig V-Cast 0.6 nozzle",
+ "RatRig V-Core 4 300 0.4 nozzle",
+ "RatRig V-Core 4 400 0.4 nozzle",
+ "RatRig V-Core 4 500 0.4 nozzle",
+ "RatRig V-Core 4 HYBRID 300 0.4 nozzle",
+ "RatRig V-Core 4 HYBRID 400 0.4 nozzle",
+ "RatRig V-Core 4 HYBRID 500 0.4 nozzle",
+ "RatRig V-Core 4 300 0.5 nozzle",
+ "RatRig V-Core 4 400 0.5 nozzle",
+ "RatRig V-Core 4 500 0.5 nozzle",
+ "RatRig V-Core 4 HYBRID 300 0.5 nozzle",
+ "RatRig V-Core 4 HYBRID 400 0.5 nozzle",
+ "RatRig V-Core 4 HYBRID 500 0.5 nozzle",
+ "RatRig V-Core 4 300 0.6 nozzle",
+ "RatRig V-Core 4 400 0.6 nozzle",
+ "RatRig V-Core 4 500 0.6 nozzle",
+ "RatRig V-Core 4 HYBRID 300 0.6 nozzle",
+ "RatRig V-Core 4 HYBRID 400 0.6 nozzle",
+ "RatRig V-Core 4 HYBRID 500 0.6 nozzle"
+ ]
+}

resources/profiles/Ratrig/machine/RatRig V-Core 4 300 0.4 nozzle.json

@@ -18,31 +18,36 @@
  ],
  "machine_max_speed_x": ["400", "400"],
  "machine_max_speed_y": ["400", "400"],
- "machine_max_speed_z": ["50", "50"],
+ "machine_max_speed_z": ["200", "200"],
  "machine_max_speed_e": ["120", "120"],
  "machine_max_acceleration_x": ["10000", "10000"],
  "machine_max_acceleration_y": ["10000", "10000"],
  "machine_max_acceleration_z": ["200", "200"],
  "machine_max_acceleration_e": ["5000", "5000"],
  "machine_max_acceleration_extruding": ["10000", "10000"],
  "machine_max_acceleration_retracting": ["10000", "10000"],
+ "machine_max_acceleration_travel": ["10000", "10000"],
  "machine_max_jerk_x": ["5", "5"],
  "machine_max_jerk_y": ["5", "5"],
  "machine_max_jerk_z": ["0.4", "0.4"],
  "machine_max_jerk_e": ["5", "5"],
  "min_layer_height": ["0.06"],
  "max_layer_height": ["0.3"],
+ "extruder_clearance_radius": "45",
+ "extruder_clearance_height_to_rod": "25",
+ "extruder_clearance_height_to_lid": "140",
  "retract_lift_below": ["0.2"],
  "retraction_length": ["0.8"],
  "retraction_speed": ["120"],
  "deretraction_speed": ["120"],
- "wipe": ["0"],
- "retract_before_wipe": ["0%"],
+ "wipe": ["1"],
+ "retract_before_wipe": ["70%"],
+ "z_hop": ["0.2"],
  "machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
- "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
- "before_layer_change_gcode": ";[layer_z]",
+ "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
+ "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
  "change_filament_gcode": "M600",
- "machine_pause_gcode": "M601",
+ "machine_pause_gcode": "PAUSE",
  "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0",
  "printable_height": "300",
  "thumbnails": [

resources/profiles/Ratrig/machine/RatRig V-Core 4 300 0.5 nozzle.json

@@ -18,31 +18,36 @@
  ],
  "machine_max_speed_x": ["400", "400"],
  "machine_max_speed_y": ["400", "400"],
- "machine_max_speed_z": ["50", "50"],
+ "machine_max_speed_z": ["200", "200"],
  "machine_max_speed_e": ["120", "120"],
  "machine_max_acceleration_x": ["10000", "10000"],
  "machine_max_acceleration_y": ["10000", "10000"],
  "machine_max_acceleration_z": ["200", "200"],
  "machine_max_acceleration_e": ["5000", "5000"],
  "machine_max_acceleration_extruding": ["10000", "10000"],
  "machine_max_acceleration_retracting": ["10000", "10000"],
+ "machine_max_acceleration_travel": ["10000", "10000"],
  "machine_max_jerk_x": ["5", "5"],
  "machine_max_jerk_y": ["5", "5"],
  "machine_max_jerk_z": ["0.4", "0.4"],
  "machine_max_jerk_e": ["5", "5"],
  "min_layer_height": ["0.07"],
  "max_layer_height": ["0.32"],
+ "extruder_clearance_radius": "45",
+ "extruder_clearance_height_to_rod": "25",
+ "extruder_clearance_height_to_lid": "140",
  "retract_lift_below": ["0.2"],
  "retraction_length": ["0.8"],
  "retraction_speed": ["120"],
  "deretraction_speed": ["120"],
- "wipe": ["0"],
- "retract_before_wipe": ["0%"],
+ "wipe": ["1"],
+ "retract_before_wipe": ["70%"],
+ "z_hop": ["0.2"],
  "machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
- "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
- "before_layer_change_gcode": ";[layer_z]",
+ "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
+ "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
  "change_filament_gcode": "M600",
- "machine_pause_gcode": "M601",
+ "machine_pause_gcode": "PAUSE",
  "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0",
  "printable_height": "300",
  "thumbnails": [