Fix a bug that wipe tower has missing extrusions when ramming is disa…

…bled (#6894)

* Fix a bug that wipe tower has missing extrusions when ramming is disabled.

* hide "Prime all printing extruders" for SEMM printers

src/libslic3r/GCode/WipeTower2.cpp

@@ -893,7 +893,7 @@ void WipeTower2::toolchange_Unload(
  float remaining = xr - xl ; // keeps track of distance to the next turnaround
  float e_done = 0; // measures E move done from each segment 
 
- const bool do_ramming = m_enable_filament_ramming && (m_semm || m_filpar[m_current_tool].multitool_ramming);
+ const bool do_ramming = m_semm || m_filpar[m_current_tool].multitool_ramming;
  const bool cold_ramming = m_is_mk4mmu3;
 
  if (do_ramming) {
@@ -945,7 +945,6 @@ void WipeTower2::toolchange_Unload(
  // now the ramming itself:
  while (do_ramming && i < m_filpar[m_current_tool].ramming_speed.size())
  {
- writer.append("; Ramming\n");
  // The time step is different for SEMM ramming and the MM ramming. See comments in set_extruder() for details.
  const float time_step = m_semm ? 0.25f : m_filpar[m_current_tool].multitool_ramming_time;
 
@@ -971,9 +970,12 @@ void WipeTower2::toolchange_Unload(
  writer.change_analyzer_line_width(m_perimeter_width); // so the next lines are not affected by ramming_line_width_multiplier
 
  // Retraction:
+ if(m_enable_filament_ramming)
+ writer.append("; Ramming start\n");
+
  float old_x = writer.x();
  float turning_point = (!m_left_to_right ? xl : xr );
- if (m_semm && (m_cooling_tube_retraction != 0 || m_cooling_tube_length != 0)) {
+ if (m_enable_filament_ramming && m_semm && (m_cooling_tube_retraction != 0 || m_cooling_tube_length != 0)) {
  writer.append("; Retract(unload)\n");
  float total_retraction_distance = m_cooling_tube_retraction + m_cooling_tube_length/2.f - 15.f; // the 15mm is reserved for the first part after ramming
  writer.suppress_preview()
@@ -985,7 +987,7 @@ void WipeTower2::toolchange_Unload(
  }
 
  const int& number_of_cooling_moves = m_filpar[m_current_tool].cooling_moves;
- const bool cooling_will_happen = m_semm && number_of_cooling_moves > 0 && m_cooling_tube_length != 0;
+ const bool cooling_will_happen = m_enable_filament_ramming && m_semm && number_of_cooling_moves > 0 && m_cooling_tube_length != 0;
  bool change_temp_later = false;
 
  // Wipe tower should only change temperature with single extruder MM. Otherwise, all temperatures should
@@ -1054,7 +1056,7 @@ void WipeTower2::toolchange_Unload(
  }
  }
 
- if (m_semm) {
+ if (m_enable_filament_ramming && m_semm) {
  writer.append("; Cooling park\n");
  // let's wait is necessary:
  writer.wait(m_filpar[m_current_tool].delay);
@@ -1064,6 +1066,10 @@ void WipeTower2::toolchange_Unload(
  writer.retract(_e, 2000);
  }
 
+ if(m_enable_filament_ramming)
+ writer.append("; Ramming end\n");
+
+
  // this is to align ramming and future wiping extrusions, so the future y-steps can be uniform from the start:
  // the perimeter_width will later be subtracted, it is there to not load while moving over just extruded material
  Vec2f pos = Vec2f(end_of_ramming.x(), end_of_ramming.y() + (y_step/m_extra_spacing_ramming-m_perimeter_width) / 2.f + m_perimeter_width);

src/slic3r/GUI/ConfigManipulation.cpp

@@ -676,10 +676,11 @@ void ConfigManipulation::toggle_print_fff_options(DynamicPrintConfig *config, co
  for (auto el : {"wipe_tower_rotation_angle", "wipe_tower_cone_angle",
  "wipe_tower_extra_spacing", "wipe_tower_max_purge_speed",
  "wipe_tower_bridging", "wipe_tower_extra_flow",
- "wipe_tower_no_sparse_layers",
- "single_extruder_multi_material_priming"})
+ "wipe_tower_no_sparse_layers"})
  toggle_line(el, have_prime_tower && !is_BBL_Printer);
 
+ toggle_line("single_extruder_multi_material_priming", !bSEMM && have_prime_tower && !is_BBL_Printer);
+
  toggle_line("prime_volume",have_prime_tower && (!purge_in_primetower || !bSEMM));
 
  for (auto el : {"flush_into_infill", "flush_into_support", "flush_into_objects"})