Skip to content

Commit

Permalink
Tweak default settings for Qidi: turn off ironing by default and turn…
Browse files Browse the repository at this point in the history 
… arc fitting for 3 serials
  • Loading branch information
@SoftFever
SoftFever committed May 28, 2023
1 parent 35e75b9 commit 48a7e73
Show file tree
Hide file tree
Showing 30 changed files with 45 additions and 45 deletions.
2 changes: 1 addition & 1 deletion resources/profiles/Qidi/process/0.12mm Fine @Qidi XCFPro.json
View file
Original file line number Diff line number Diff line change
Expand Up @@ -43,7 +43,7 @@
"ironing_flow": "15%",
"ironing_spacing": "0.1",
"ironing_speed": "15",
"ironing_type": "top",
"ironing_type": "no ironing",
"reduce_infill_retraction": "1",
"filename_format": "[input_filename_base].gcode",
"detect_overhang_wall": "1",
Expand Down
2 changes: 1 addition & 1 deletion resources/profiles/Qidi/process/0.12mm Fine @Qidi XMax.json
View file
Original file line number Diff line number Diff line change
Expand Up @@ -43,7 +43,7 @@
"ironing_flow": "15%",
"ironing_spacing": "0.1",
"ironing_speed": "15",
"ironing_type": "top",
"ironing_type": "no ironing",
"reduce_infill_retraction": "1",
"filename_format": "[input_filename_base].gcode",
"detect_overhang_wall": "1",
Expand Down
4 changes: 2 additions & 2 deletions resources/profiles/Qidi/process/0.12mm Fine @Qidi XMax3.json
View file
Original file line number Diff line number Diff line change
Expand Up @@ -25,7 +25,7 @@
"bridge_no_support": "0",
"draft_shield": "disabled",
"elefant_foot_compensation": "0",
"enable_arc_fitting": "0",
"enable_arc_fitting": "1",
"outer_wall_line_width": "0.4",
"wall_infill_order": "inner wall/outer wall/infill",
"line_width": "0.42",
Expand All @@ -46,7 +46,7 @@
"ironing_flow": "15%",
"ironing_spacing": "0.1",
"ironing_speed": "15",
"ironing_type": "top",
"ironing_type": "no ironing",
"reduce_infill_retraction": "1",
"filename_format": "[input_filename_base].gcode",
"detect_overhang_wall": "1",
Expand Down
2 changes: 1 addition & 1 deletion resources/profiles/Qidi/process/0.12mm Fine @Qidi XPlus.json
View file
Original file line number Diff line number Diff line change
Expand Up @@ -43,7 +43,7 @@
"ironing_flow": "15%",
"ironing_spacing": "0.1",
"ironing_speed": "15",
"ironing_type": "top",
"ironing_type": "no ironing",
"reduce_infill_retraction": "1",
"filename_format": "[input_filename_base].gcode",
"detect_overhang_wall": "1",
Expand Down
4 changes: 2 additions & 2 deletions resources/profiles/Qidi/process/0.12mm Fine @Qidi XPlus3.json
View file
Original file line number Diff line number Diff line change
Expand Up @@ -25,7 +25,7 @@
"bridge_no_support": "0",
"draft_shield": "disabled",
"elefant_foot_compensation": "0",
"enable_arc_fitting": "0",
"enable_arc_fitting": "1",
"outer_wall_line_width": "0.4",
"wall_infill_order": "inner wall/outer wall/infill",
"line_width": "0.42",
Expand All @@ -46,7 +46,7 @@
"ironing_flow": "15%",
"ironing_spacing": "0.1",
"ironing_speed": "15",
"ironing_type": "top",
"ironing_type": "no ironing",
"reduce_infill_retraction": "1",
"filename_format": "[input_filename_base].gcode",
"detect_overhang_wall": "1",
Expand Down
4 changes: 2 additions & 2 deletions resources/profiles/Qidi/process/0.12mm Fine @Qidi XSmart3.json
View file
Original file line number Diff line number Diff line change
Expand Up @@ -25,7 +25,7 @@
"bridge_no_support": "0",
"draft_shield": "disabled",
"elefant_foot_compensation": "0",
"enable_arc_fitting": "0",
"enable_arc_fitting": "1",
"outer_wall_line_width": "0.4",
"wall_infill_order": "inner wall/outer wall/infill",
"line_width": "0.42",
Expand All @@ -46,7 +46,7 @@
"ironing_flow": "15%",
"ironing_spacing": "0.1",
"ironing_speed": "15",
"ironing_type": "top",
"ironing_type": "no ironing",
"reduce_infill_retraction": "1",
"filename_format": "[input_filename_base].gcode",
"detect_overhang_wall": "1",
Expand Down
2 changes: 1 addition & 1 deletion resources/profiles/Qidi/process/0.16mm Optimal @Qidi XCFPro.json
View file
Original file line number Diff line number Diff line change
Expand Up @@ -43,7 +43,7 @@
"ironing_flow": "15%",
"ironing_spacing": "0.1",
"ironing_speed": "15",
"ironing_type": "top",
"ironing_type": "no ironing",
"reduce_infill_retraction": "1",
"filename_format": "[input_filename_base].gcode",
"detect_overhang_wall": "1",
Expand Down
2 changes: 1 addition & 1 deletion resources/profiles/Qidi/process/0.16mm Optimal @Qidi XMax.json
View file
Original file line number Diff line number Diff line change
Expand Up @@ -43,7 +43,7 @@
"ironing_flow": "15%",
"ironing_spacing": "0.1",
"ironing_speed": "15",
"ironing_type": "top",
"ironing_type": "no ironing",
"reduce_infill_retraction": "1",
"filename_format": "[input_filename_base].gcode",
"detect_overhang_wall": "1",
Expand Down
4 changes: 2 additions & 2 deletions resources/profiles/Qidi/process/0.16mm Optimal @Qidi XMax3.json
View file
Original file line number Diff line number Diff line change
Expand Up @@ -25,7 +25,7 @@
"bridge_no_support": "0",
"draft_shield": "disabled",
"elefant_foot_compensation": "0",
"enable_arc_fitting": "0",
"enable_arc_fitting": "1",
"outer_wall_line_width": "0.4",
"wall_infill_order": "inner wall/outer wall/infill",
"line_width": "0.42",
Expand All @@ -46,7 +46,7 @@
"ironing_flow": "15%",
"ironing_spacing": "0.1",
"ironing_speed": "15",
"ironing_type": "top",
"ironing_type": "no ironing",
"reduce_infill_retraction": "1",
"filename_format": "[input_filename_base].gcode",
"detect_overhang_wall": "1",
Expand Down
2 changes: 1 addition & 1 deletion resources/profiles/Qidi/process/0.16mm Optimal @Qidi XPlus.json
View file
Original file line number Diff line number Diff line change
Expand Up @@ -43,7 +43,7 @@
"ironing_flow": "15%",
"ironing_spacing": "0.1",
"ironing_speed": "15",
"ironing_type": "top",
"ironing_type": "no ironing",
"reduce_infill_retraction": "1",
"filename_format": "[input_filename_base].gcode",
"detect_overhang_wall": "1",
Expand Down
4 changes: 2 additions & 2 deletions resources/profiles/Qidi/process/0.16mm Optimal @Qidi XPlus3.json
View file
Original file line number Diff line number Diff line change
Expand Up @@ -25,7 +25,7 @@
"bridge_no_support": "0",
"draft_shield": "disabled",
"elefant_foot_compensation": "0",
"enable_arc_fitting": "0",
"enable_arc_fitting": "1",
"outer_wall_line_width": "0.4",
"wall_infill_order": "inner wall/outer wall/infill",
"line_width": "0.42",
Expand All @@ -46,7 +46,7 @@
"ironing_flow": "15%",
"ironing_spacing": "0.1",
"ironing_speed": "15",
"ironing_type": "top",
"ironing_type": "no ironing",
"reduce_infill_retraction": "1",
"filename_format": "[input_filename_base].gcode",
"detect_overhang_wall": "1",
Expand Down
4 changes: 2 additions & 2 deletions resources/profiles/Qidi/process/0.16mm Optimal @Qidi XSmart3.json
View file
Original file line number Diff line number Diff line change
Expand Up @@ -25,7 +25,7 @@
"bridge_no_support": "0",
"draft_shield": "disabled",
"elefant_foot_compensation": "0",
"enable_arc_fitting": "0",
"enable_arc_fitting": "1",
"outer_wall_line_width": "0.4",
"wall_infill_order": "inner wall/outer wall/infill",
"line_width": "0.42",
Expand All @@ -46,7 +46,7 @@
"ironing_flow": "15%",
"ironing_spacing": "0.1",
"ironing_speed": "15",
"ironing_type": "top",
"ironing_type": "no ironing",
"reduce_infill_retraction": "1",
"filename_format": "[input_filename_base].gcode",
"detect_overhang_wall": "1",
Expand Down
2 changes: 1 addition & 1 deletion resources/profiles/Qidi/process/0.20mm Standard @Qidi XCFPro.json
View file
Original file line number Diff line number Diff line change
Expand Up @@ -43,7 +43,7 @@
"ironing_flow": "15%",
"ironing_spacing": "0.1",
"ironing_speed": "15",
"ironing_type": "top",
"ironing_type": "no ironing",
"reduce_infill_retraction": "1",
"filename_format": "[input_filename_base].gcode",
"detect_overhang_wall": "1",
Expand Down
2 changes: 1 addition & 1 deletion resources/profiles/Qidi/process/0.20mm Standard @Qidi XMax.json
View file
Original file line number Diff line number Diff line change
Expand Up @@ -43,7 +43,7 @@
"ironing_flow": "15%",
"ironing_spacing": "0.1",
"ironing_speed": "15",
"ironing_type": "top",
"ironing_type": "no ironing",
"reduce_infill_retraction": "1",
"filename_format": "[input_filename_base].gcode",
"detect_overhang_wall": "1",
Expand Down
4 changes: 2 additions & 2 deletions resources/profiles/Qidi/process/0.20mm Standard @Qidi XMax3.json
View file
Original file line number Diff line number Diff line change
Expand Up @@ -25,7 +25,7 @@
"bridge_no_support": "0",
"draft_shield": "disabled",
"elefant_foot_compensation": "0",
"enable_arc_fitting": "0",
"enable_arc_fitting": "1",
"outer_wall_line_width": "0.4",
"wall_infill_order": "inner wall/outer wall/infill",
"line_width": "0.42",
Expand All @@ -46,7 +46,7 @@
"ironing_flow": "15%",
"ironing_spacing": "0.1",
"ironing_speed": "15",
"ironing_type": "top",
"ironing_type": "no ironing",
"reduce_infill_retraction": "1",
"filename_format": "[input_filename_base].gcode",
"detect_overhang_wall": "1",
Expand Down
2 changes: 1 addition & 1 deletion resources/profiles/Qidi/process/0.20mm Standard @Qidi XPlus.json
View file
Original file line number Diff line number Diff line change
Expand Up @@ -43,7 +43,7 @@
"ironing_flow": "15%",
"ironing_spacing": "0.1",
"ironing_speed": "15",
"ironing_type": "top",
"ironing_type": "no ironing",
"reduce_infill_retraction": "1",
"filename_format": "[input_filename_base].gcode",
"detect_overhang_wall": "1",
Expand Down
4 changes: 2 additions & 2 deletions resources/profiles/Qidi/process/0.20mm Standard @Qidi XPlus3.json
View file
Original file line number Diff line number Diff line change
Expand Up @@ -25,7 +25,7 @@
"bridge_no_support": "0",
"draft_shield": "disabled",
"elefant_foot_compensation": "0",
"enable_arc_fitting": "0",
"enable_arc_fitting": "1",
"outer_wall_line_width": "0.4",
"wall_infill_order": "inner wall/outer wall/infill",
"line_width": "0.42",
Expand All @@ -46,7 +46,7 @@
"ironing_flow": "15%",
"ironing_spacing": "0.1",
"ironing_speed": "15",
"ironing_type": "top",
"ironing_type": "no ironing",
"reduce_infill_retraction": "1",
"filename_format": "[input_filename_base].gcode",
"detect_overhang_wall": "1",
Expand Down
4 changes: 2 additions & 2 deletions resources/profiles/Qidi/process/0.20mm Standard @Qidi XSmart3.json
View file
Original file line number Diff line number Diff line change
Expand Up @@ -25,7 +25,7 @@
"bridge_no_support": "0",
"draft_shield": "disabled",
"elefant_foot_compensation": "0",
"enable_arc_fitting": "0",
"enable_arc_fitting": "1",
"outer_wall_line_width": "0.4",
"wall_infill_order": "inner wall/outer wall/infill",
"line_width": "0.42",
Expand All @@ -46,7 +46,7 @@
"ironing_flow": "15%",
"ironing_spacing": "0.1",
"ironing_speed": "15",
"ironing_type": "top",
"ironing_type": "no ironing",
"reduce_infill_retraction": "1",
"filename_format": "[input_filename_base].gcode",
"detect_overhang_wall": "1",
Expand Down
2 changes: 1 addition & 1 deletion resources/profiles/Qidi/process/0.25mm Draft @Qidi XCFPro.json
View file
Original file line number Diff line number Diff line change
Expand Up @@ -43,7 +43,7 @@
"ironing_flow": "15%",
"ironing_spacing": "0.1",
"ironing_speed": "15",
"ironing_type": "top",
"ironing_type": "no ironing",
"reduce_infill_retraction": "1",
"filename_format": "[input_filename_base].gcode",
"detect_overhang_wall": "1",
Expand Down
2 changes: 1 addition & 1 deletion resources/profiles/Qidi/process/0.25mm Draft @Qidi XMax.json
View file
Original file line number Diff line number Diff line change
Expand Up @@ -43,7 +43,7 @@
"ironing_flow": "15%",
"ironing_spacing": "0.1",
"ironing_speed": "15",
"ironing_type": "top",
"ironing_type": "no ironing",
"reduce_infill_retraction": "1",
"filename_format": "[input_filename_base].gcode",
"detect_overhang_wall": "1",
Expand Down
4 changes: 2 additions & 2 deletions resources/profiles/Qidi/process/0.25mm Draft @Qidi XMax3.json
View file
Original file line number Diff line number Diff line change
Expand Up @@ -25,7 +25,7 @@
"bridge_no_support": "0",
"draft_shield": "disabled",
"elefant_foot_compensation": "0",
"enable_arc_fitting": "0",
"enable_arc_fitting": "1",
"outer_wall_line_width": "0.4",
"wall_infill_order": "inner wall/outer wall/infill",
"line_width": "0.42",
Expand All @@ -46,7 +46,7 @@
"ironing_flow": "15%",
"ironing_spacing": "0.1",
"ironing_speed": "15",
"ironing_type": "top",
"ironing_type": "no ironing",
"reduce_infill_retraction": "1",
"filename_format": "[input_filename_base].gcode",
"detect_overhang_wall": "1",
Expand Down
2 changes: 1 addition & 1 deletion resources/profiles/Qidi/process/0.25mm Draft @Qidi XPlus.json
View file
Original file line number Diff line number Diff line change
Expand Up @@ -43,7 +43,7 @@
"ironing_flow": "15%",
"ironing_spacing": "0.1",
"ironing_speed": "15",
"ironing_type": "top",
"ironing_type": "no ironing",
"reduce_infill_retraction": "1",
"filename_format": "[input_filename_base].gcode",
"detect_overhang_wall": "1",
Expand Down
4 changes: 2 additions & 2 deletions resources/profiles/Qidi/process/0.25mm Draft @Qidi XPlus3.json
View file
Original file line number Diff line number Diff line change
Expand Up @@ -25,7 +25,7 @@
"bridge_no_support": "0",
"draft_shield": "disabled",
"elefant_foot_compensation": "0",
"enable_arc_fitting": "0",
"enable_arc_fitting": "1",
"outer_wall_line_width": "0.4",
"wall_infill_order": "inner wall/outer wall/infill",
"line_width": "0.42",
Expand All @@ -46,7 +46,7 @@
"ironing_flow": "15%",
"ironing_spacing": "0.1",
"ironing_speed": "15",
"ironing_type": "top",
"ironing_type": "no ironing",
"reduce_infill_retraction": "1",
"filename_format": "[input_filename_base].gcode",
"detect_overhang_wall": "1",
Expand Down
4 changes: 2 additions & 2 deletions resources/profiles/Qidi/process/0.25mm Draft @Qidi XSmart3.json
View file
Original file line number Diff line number Diff line change
Expand Up @@ -25,7 +25,7 @@
"bridge_no_support": "0",
"draft_shield": "disabled",
"elefant_foot_compensation": "0",
"enable_arc_fitting": "0",
"enable_arc_fitting": "1",
"outer_wall_line_width": "0.4",
"wall_infill_order": "inner wall/outer wall/infill",
"line_width": "0.42",
Expand All @@ -46,7 +46,7 @@
"ironing_flow": "15%",
"ironing_spacing": "0.1",
"ironing_speed": "15",
"ironing_type": "top",
"ironing_type": "no ironing",
"reduce_infill_retraction": "1",
"filename_format": "[input_filename_base].gcode",
"detect_overhang_wall": "1",
Expand Down
2 changes: 1 addition & 1 deletion resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XCFPro.json
View file
Original file line number Diff line number Diff line change
Expand Up @@ -43,7 +43,7 @@
"ironing_flow": "15%",
"ironing_spacing": "0.1",
"ironing_speed": "15",
"ironing_type": "top",
"ironing_type": "no ironing",
"reduce_infill_retraction": "1",
"filename_format": "[input_filename_base].gcode",
"detect_overhang_wall": "1",
Expand Down
2 changes: 1 addition & 1 deletion resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XMax.json
View file
Original file line number Diff line number Diff line change
Expand Up @@ -43,7 +43,7 @@
"ironing_flow": "15%",
"ironing_spacing": "0.1",
"ironing_speed": "15",
"ironing_type": "top",
"ironing_type": "no ironing",
"reduce_infill_retraction": "1",
"filename_format": "[input_filename_base].gcode",
"detect_overhang_wall": "1",
Expand Down
4 changes: 2 additions & 2 deletions resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XMax3.json
View file
Original file line number Diff line number Diff line change
Expand Up @@ -25,7 +25,7 @@
"bridge_no_support": "0",
"draft_shield": "disabled",
"elefant_foot_compensation": "0",
"enable_arc_fitting": "0",
"enable_arc_fitting": "1",
"outer_wall_line_width": "0.4",
"wall_infill_order": "inner wall/outer wall/infill",
"line_width": "0.42",
Expand All @@ -46,7 +46,7 @@
"ironing_flow": "15%",
"ironing_spacing": "0.1",
"ironing_speed": "15",
"ironing_type": "top",
"ironing_type": "no ironing",
"reduce_infill_retraction": "1",
"filename_format": "[input_filename_base].gcode",
"detect_overhang_wall": "1",
Expand Down
2 changes: 1 addition & 1 deletion resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XPlus.json
View file
Original file line number Diff line number Diff line change
Expand Up @@ -43,7 +43,7 @@
"ironing_flow": "15%",
"ironing_spacing": "0.1",
"ironing_speed": "15",
"ironing_type": "top",
"ironing_type": "no ironing",
"reduce_infill_retraction": "1",
"filename_format": "[input_filename_base].gcode",
"detect_overhang_wall": "1",
Expand Down
4 changes: 2 additions & 2 deletions resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XPlus3.json
View file
Original file line number Diff line number Diff line change
Expand Up @@ -25,7 +25,7 @@
"bridge_no_support": "0",
"draft_shield": "disabled",
"elefant_foot_compensation": "0",
"enable_arc_fitting": "0",
"enable_arc_fitting": "1",
"outer_wall_line_width": "0.4",
"wall_infill_order": "inner wall/outer wall/infill",
"line_width": "0.42",
Expand All @@ -46,7 +46,7 @@
"ironing_flow": "15%",
"ironing_spacing": "0.1",
"ironing_speed": "15",
"ironing_type": "top",
"ironing_type": "no ironing",
"reduce_infill_retraction": "1",
"filename_format": "[input_filename_base].gcode",
"detect_overhang_wall": "1",
Expand Down
Loading

0 comments on commit 48a7e73

Please sign in to comment.