Arduino Library for async reading of an analogue pin. [AVR ONLY].
AsyncAnalog is a library to read the analogue port of an AVR in an asynchronous way. This means that the user must explicitly start() the ADC, check if it is ready() and read its value().
By using this class, the user prevents the (~112 uSec) blocking of the analogRead() call, and gives the user the ability to do some processing.
The library works only for AVR boards now, other platforms might be supported in the future. (PR's are welcome).
WARNING As the UNO has only one ADC that is multiplexed, one can only read one analog pin in async way simultaneously. Still it offers to about 100 micros to do something!
Use with care
#include "AsynAnalog,h"- AsyncAnalog(uint8_t pin) constructor, defines the analogue pin to use.
- void start() triggers a new ADC measurement.
- bool ready() Checks if the measurement is completed. If so the value is calculated and cached for value(). As long as ready() is not called the old value will not change!
- uint16_t value() returns the value of the ADC from cache. So it will return the same value even if the internal ADC is used to sample another analog port.
The example asyncAnalogTest2.ino shows a loop of 1000 analogReads and prints over Serial at 115200 baud.
- improve documentation.
- create examples
- real world examples preferred.
- multi ADC, e.g. A0..A4
- investigate the performance gain.
- asyncAnalogTest2.ino is not a good test.
- investigate other platforms
- fall back to normal analogRead for non AVR platforms ?
- start would be analogRead() and it would immediately be ready and the value is cached.
- better have specific code per platform.
If you appreciate my libraries, you can support the development and maintenance. Improve the quality of the libraries by providing issues and Pull Requests, or donate through PayPal or GitHub sponsors.
Thank you,