Skip to content

Allows sending sensor values to the KNX Bus

License

Notifications You must be signed in to change notification settings

OpenKNX/OAM-SensorModule

Repository files navigation

OAM-SensorModule

Implementation of an knx sensor application, which combines some OpenKNX-Projects to provide an ETS programmable device. It allows a parametrization via ETS in general, this project requires ETS 5.7 or higher.

It is implemented for the SAMD21 and RP2040 version of the knx stack.

It is a PlatformIO project and needs a working ETS 5.7 (or higher) installed on the same PC.

This uses the following OpenKNX-projects:

For more information look into our OpenKNX-wiki.

There are application descriptions available:

  • Application Sensor describes features of the sensor part of application and firmware (in German).
  • Application Presence describes features of the Presence functionality of application and firmware (in German).
  • Application WireGateway describes features of the one wire part of application and firmware (in German).
  • Application Logic describes features of the logic part of application and firmware (in German).

Thanks to all, who made this project successful.