BiomeUtils

This library aims to give easy access to the different biomes generations of Minecraft. It is not direct copy of Minecraft source code as it has been rewritten from the ground up with optimizations in mind.

We support release 1.0 to release 1.16.5 (no snapshot support)

---

A few words

Before using the library, I want to say a few words about OverWorld biome generation in Minecraft. Currently, as it has been implemented, the biome generation is split up in layers which are stacked together to form the biome generator.

This generator can be split in 4 different part, there is first the legacy stack which starts from ContinentLayer and ends up at DeepOceanLayer.

Then there is a noise layer (NoiseLayer scaled 2 times) which is fed into 2 different stack, one for adding new biomes (starting at BaseBiomesLayer and ending at SmoothScaleLayer) and the other for the rivers (starting at NoiseToRiverLayer and ending at SmoothScaleLayer).

The two split stacks are merged inside RiverLayer and the last stack with OceanTemperatureLayer (for 1.13+) is then initialized, scaled 6 times and merged again with the rest.

At this point the biome generator give the biomes at 1/4 the scale of what you would encounter, a last layer is applied, called VoronoiLayer which takes since 1.15 the sha2 hash of the world seed to initialize it. This means that this last layer can be done on the client side and save both on server performance and bandwidth.

For Nether and End biome generation, Simplex and Perlin noise are used, thus they only use the 48 lower bits of the seed compared to the OverWorld.

---

How to use

Here vXXX means any version starting from v1_0 (for the moment, we are extending support) till current supported one.

Before anything, we recommend using gradle buildsystem to import the library as such:

repositories {
    mavenCentral()
    maven { url 'https://jitpack.io' }
}

dependencies {
    implementation ('com.github.KaptainWutax:BiomeUtils:-SNAPSHOT'){
        transitive = false
    }
    implementation ('com.github.KaptainWutax:SeedUtils:-SNAPSHOT'){
        transitive = false
    }
    implementation ('com.github.KaptainWutax:MCUtils:-SNAPSHOT'){
        transitive = false
    }
    implementation ('com.github.KaptainWutax:NoiseUtils:-SNAPSHOT'){
        transitive = false
    }
}

To use the library, you have a few possible endpoints depending on your usage:

• If you want to programmatically use a dimension please use this method, remember only 3 dimensions exists yet (OVERWORLD, NETHER, END)

import kaptainwutax.biomeutils.biome.Biome;
import kaptainwutax.biomeutils.source.BiomeSource;
import kaptainwutax.mcutils.state.Dimension;
import kaptainwutax.mcutils.version.MCVersion;
BiomeSource biomeSource = BiomeSource.of(Dimension.<YOUR_DIMENSION>,MCVersion.vXXX, seed);
assert biomeSource != null;
Biome biome=biomeSource.getBiome(x,y,z);

• If you need simply OverWorld biomes then you use it as follows
  • OverworldBiomeSource#getBiome will give you the biome as scale 1/1
  • OverworldBiomeSource#getBiomeForNoiseGen will give you the biome as scale 1/4 (aka pre-Voronoi)
  • OverworldBiomeSource.(base|ocean|noise|variants|biomes|river|full|voronoi)#get are entry points for different level in the generator.

The common approach:

import kaptainwutax.biomeutils.biome.Biome;
import kaptainwutax.biomeutils.source.OverworldBiomeSource;
import kaptainwutax.mcutils.version.MCVersion;
OverworldBiomeSource biomeSource = new OverworldBiomeSource(MCVersion.vXXX, seed);
Biome biome=biomeSource.getBiome(x,y,z); // here y is always 0 no matter what you pass

• If you need to use Nether biome generation you need to do as follows
  • NetherBiomeSource#getBiome will give you the biome as scale 1/1
  • NetherBiomeSource#getBiomeForNoiseGen will give you the biome as scale 1/4 (aka pre-Voronoi)
  • NetherBiomeSource.(full|voronoi)#get are entry points for different level

import kaptainwutax.biomeutils.biome.Biome;
import kaptainwutax.biomeutils.source.NetherBiomeSource;
import kaptainwutax.mcutils.version.MCVersion;
NetherBiomeSource netherBiomeSource=new NetherBiomeSource(MCVersion.vXXX, seed);
Biome biome=netherBiomeSource.getBiome(x,y,z); // here y matters

• If you need to use End biome generation you need to do as follows
  • EndBiomeSource#getBiome will give you the biome as scale 1/1
  • EndBiomeSource#getBiomeForNoiseGen will give you the biome as scale 1/4 (aka pre-Voronoi)
  • EndBiomeSource.(full|simplex|voronoi)#get are entry points for different level

import kaptainwutax.biomeutils.biome.Biome;
import kaptainwutax.biomeutils.source.EndBiomeSource;
import kaptainwutax.mcutils.version.MCVersion;
EndBiomeSource endBiomeSource=new EndBiomeSource(MCVersion.vXXX, seed);
Biome biome=endBiomeSource.getBiome(x,y,z); // here y is always 0 no matter what you pass

• If you want to get information about biomes, there is a registry available with all 79 of them

import kaptainwutax.biomeutils.biome.Biome;
import kaptainwutax.biomeutils.biome.Biomes;

import java.util.Map;

public class Main {
  public static void main(String[] args) {
    for (Map.Entry<Integer,Biome> entry: Biomes.REGISTRY.entrySet()){
      System.out.printf("Id %d belong to %s%n",entry.getKey(),entry.getValue());
    }
  }
}

Legal mentions

Licensed under MIT

Maintained by Neil and KaptainWutax.

NOT OFFICIAL MINECRAFT PRODUCT. NOT APPROVED BY OR ASSOCIATED WITH MOJANG.