KaliNethunter-Rooted Galaxy A8+ (A730F) | Others Galaxy Devices

Required Files: https://github.com/HackWithSumit/KaliNethunter-Rooted/releases/tag/KaliNethunter

A. 1st turn on OEM Unlocking (Procedure):

How to Enable OEM Unlocking on Samsung Devices

To enable OEM Unlocking on a Samsung device, follow these steps:

Step 1: Enable Developer Options

1. Go to Settings

   • Open the "Settings" app on your Samsung device.

2. Scroll down and select About phone

   • Usually located at the bottom of the list.

3. Tap on Software Information

   • In the "About phone" section, look for Software Information.

4. Tap Build Number 7 times

   • Find the Build number and tap it 7 times. You may be asked to enter your PIN, password, or pattern.

5. Developer Mode enabled

   • After the 7 taps, you’ll see a message saying "Developer mode has been turned on."

Step 2: Enable OEM Unlocking

1. Go back to Settings

   • Return to the main "Settings" menu.

2. Open Developer Options

   • Scroll down to find Developer Options, which is now visible after enabling it.

3. Find OEM Unlocking

   • In the Developer Options menu, scroll down to OEM Unlocking and toggle it on.

4. Confirm OEM Unlocking

   • You will be prompted with a warning. Read through and confirm by tapping Enable.

Step-by-Step Images

1. Go to Settings > About phone > Software Information

![Step 1: Go to Software Information]

2. Tap Build Number 7 Times

![Step 2: Tap Build Number]

3. Go Back to Settings > Developer Options

![Step 3: Developer Options]

4. Toggle OEM Unlocking On

![Step 4: OEM Unlocking]

Now, your Samsung device should have OEM Unlocking enabled!

Then turn phone into Download mode

How to Turn on Samsung Device into Download Mode

For Samsung Devices with Bixby Button (like Galaxy S10, S9, Note 9):

1. Turn off your Samsung device completely.
2. Press and hold the Volume Down + Bixby + Power buttons simultaneously.
3. Keep holding the buttons until the Download Mode screen appears.
4. Release the buttons when you see the Warning screen, then press Volume Up to confirm and enter Download Mode.

For Samsung Devices without a Bixby Button (like Galaxy S20, S21, Note 20):

1. Turn off your device.
2. Press and hold the Volume Down + Volume Up buttons together.
3. While holding these buttons, connect your phone to your PC using a USB cable.
4. When the Warning screen appears, release the buttons and press Volume Up to enter Download Mode.

For Older Samsung Devices (with Home Button):

1. Power off the device.
2. Press and hold Volume Down + Home + Power buttons at the same time.
3. When the Warning screen appears, press Volume Up to confirm and enter Download Mode.

---

Once in Download Mode, you can connect your device to a computer and use tools like Odin to flash firmware or perform other tasks.

Now Run Odin.exe

Odin Application Interface:

Now Click on AP tab then choose TWRP.tar file.

Remember Your device must be in Download Mode.

Then click on Start Button

Remember Nand Erase & Auto Reboot not checked.