Fixes for MSVC 1940 & 1941, CMake 3.30, Github Actions Node16 #39
Workflow file for this run
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| # Perform builds with supported MPI versions | |
| name: MPI | |
| on: | |
| # On pull_requests which mutate this CI workflow, using pr rather than push:branch to ensure that the merged state will be OK, as that is what is important here. | |
| pull_request: | |
| paths: | |
| - ".github/workflows/MPI.yml" | |
| - "tests/test_cases/simulation/test_mpi_ensemble.cu" | |
| - "include/flamegpu/simulation/detail/MPISimRunner.h" | |
| - "include/flamegpu/simulation/detail/AbstractSimRunner.h" | |
| - "src/flamegpu/simulation/detail/MPISimRunner.cu" | |
| - "src/flamegpu/simulation/detail/AbstractSimRunner.cu" | |
| - "src/flamegpu/simulation/CUDAEnsemble.cu" | |
| - "**mpi**" | |
| - "**MPI**" | |
| # Or trigger on manual dispatch. | |
| workflow_dispatch: | |
| defaults: | |
| run: | |
| # Default to using bash regardless of OS unless otherwise specified. | |
| shell: bash | |
| jobs: | |
| build-ubuntu: | |
| runs-on: ${{ matrix.cudacxx.os }} | |
| strategy: | |
| fail-fast: false | |
| # Multiplicative build matrix | |
| # optional exclude: can be partial, include: must be specific | |
| matrix: | |
| # CUDA_ARCH values are reduced compared to wheels due to CI memory issues while compiling the test suite. | |
| cudacxx: | |
| - cuda: "12.0" | |
| cuda_arch: "50-real;" | |
| hostcxx: gcc-11 | |
| os: ubuntu-22.04 | |
| python: | |
| - "3.8" | |
| mpi: | |
| - lib: "openmpi" | |
| version: "apt" # MPI 3.1 | |
| # - lib: "openmpi" | |
| # version: "4.1.6" # MPI 3.1 | |
| # - lib: "openmpi" | |
| # version: "4.0.0" # MPI 3.1 | |
| # - lib: "openmpi" | |
| # version: "3.0.0" # MPI 3.1 | |
| # - lib: "openmpi" | |
| # version: "2.0.0" # MPI 3.1 | |
| - lib: "openmpi" | |
| version: "1.10.7" # MPI 3.0 | |
| - lib: "mpich" | |
| version: "apt" # MPI 4.0 | |
| # - lib: "mpich" | |
| # version: "4.1.2" # MPI 4.0 | |
| # - lib: "mpich" | |
| # version: "4.0" # MPI 4.0 | |
| # - lib: "mpich" | |
| # version: "3.4.3" # MPI 3.1 | |
| - lib: "mpich" | |
| version: "3.3" # MPI 3.1 | |
| config: | |
| - name: "Release" | |
| config: "Release" | |
| SEATBELTS: "ON" | |
| VISUALISATION: | |
| - "OFF" | |
| # Name the job based on matrix/env options | |
| name: "build-ubuntu-mpi (${{ matrix.mpi.lib }}, ${{ matrix.mpi.version }}, ${{ matrix.cudacxx.cuda }}, ${{matrix.python}}, ${{ matrix.VISUALISATION }}, ${{ matrix.config.name }}, ${{ matrix.cudacxx.os }})" | |
| # Define job-wide env constants, and promote matrix elements to env constants for portable steps. | |
| env: | |
| # Define constants | |
| BUILD_DIR: "build" | |
| FLAMEGPU_BUILD_TESTS: "ON" | |
| # Conditional based on matrix via awkward almost ternary | |
| FLAMEGPU_BUILD_PYTHON: ${{ fromJSON('{true:"ON",false:"OFF"}')[matrix.python != ''] }} | |
| # Port matrix options to environment, for more portability. | |
| CUDA: ${{ matrix.cudacxx.cuda }} | |
| CUDA_ARCH: ${{ matrix.cudacxx.cuda_arch }} | |
| HOSTCXX: ${{ matrix.cudacxx.hostcxx }} | |
| OS: ${{ matrix.cudacxx.os }} | |
| CONFIG: ${{ matrix.config.config }} | |
| FLAMEGPU_SEATBELTS: ${{ matrix.config.SEATBELTS }} | |
| PYTHON: ${{ matrix.python }} | |
| MPI_LIB: ${{ matrix.mpi.lib }} | |
| MPI_VERSION: ${{ matrix.mpi.version }} | |
| VISUALISATION: ${{ matrix.VISUALISATION }} | |
| steps: | |
| - uses: actions/checkout@v3 | |
| - name: Install CUDA | |
| if: ${{ startswith(env.OS, 'ubuntu') && env.CUDA != '' }} | |
| env: | |
| cuda: ${{ env.CUDA }} | |
| run: .github/scripts/install_cuda_ubuntu.sh | |
| - name: Install/Select gcc and g++ | |
| if: ${{ startsWith(env.HOSTCXX, 'gcc-') }} | |
| run: | | |
| gcc_version=${HOSTCXX//gcc-/} | |
| sudo apt-get install -y gcc-${gcc_version} g++-${gcc_version} | |
| echo "CC=/usr/bin/gcc-${gcc_version}" >> $GITHUB_ENV | |
| echo "CXX=/usr/bin/g++-${gcc_version}" >> $GITHUB_ENV | |
| echo "CUDAHOSTCXX=/usr/bin/g++-${gcc_version}" >> $GITHUB_ENV | |
| - name: Install MPI from apt | |
| if: ${{ env.MPI_VERSION == 'apt' }} | |
| working-directory: ${{ runner.temp }} | |
| run: | | |
| sudo apt-get install lib${{ env.MPI_LIB }}-dev | |
| - name: Install OpenMPI from source | |
| if: ${{ env.MPI_VERSION != 'apt' && env.MPI_LIB == 'openmpi' }} | |
| working-directory: ${{ runner.temp }} | |
| run: | | |
| # Note: using download.open-mpi.org as gh tags aren't pre configured | |
| MPI_VERISON_MAJOR_MINOR=$(cut -d '.' -f 1,2 <<< "${{ env.MPI_VERSION}}") | |
| echo "https://download.open-mpi.org/release/open-mpi/v${MPI_VERISON_MAJOR_MINOR}/openmpi-${{ env.MPI_VERSION}}.tar.gz" | |
| wget -q https://download.open-mpi.org/release/open-mpi/v${MPI_VERISON_MAJOR_MINOR}/openmpi-${{ env.MPI_VERSION}}.tar.gz --output-document openmpi-${{ env.MPI_VERSION }}.tar.gz || (echo "An Error occurred while downloading OpenMPI '${{ env.MPI_VERSION }}'. Is it a valid version of OpenMPI?" && exit 1) | |
| tar -zxvf openmpi-${{ env.MPI_VERSION }}.tar.gz | |
| cd openmpi-${{ env.MPI_VERSION}} | |
| ./configure --prefix="${{ runner.temp }}/mpi" | |
| make -j `nproc` | |
| make install -j `nproc` | |
| echo "${{ runner.temp }}/mpi/bin" >> $GITHUB_PATH | |
| echo "LD_LIBRARY_PATH=${{ runner.temp }}/mpi/lib:${LD_LIBRARY_PATH}" >> $GITHUB_ENV | |
| echo "LD_RUN_PATH=${{ runner.temp }}/mpi/lib:${LD_RUN_PATH}" >> $GITHUB_ENV | |
| # This will only work for mpich >= 3.3: | |
| # 3.0-3.2 doesn't appear compatible with default gcc in 22.04. | |
| # 1.x is named mpich2 so requires handling differently | |
| # Uses the ch3 interface, as ch4 isn't available pre 3.4, but one must be specified for some versions | |
| - name: Install MPICH from source | |
| if: ${{ env.MPI_VERSION != 'apt' && env.MPI_LIB == 'mpich' }} | |
| working-directory: ${{ runner.temp }} | |
| run: | | |
| MPI_MAJOR=$(cut -d '.' -f 1 <<< "${{ env.MPI_VERSION}}") | |
| MPI_MINOR=$(cut -d '.' -f 2 <<< "${{ env.MPI_VERSION}}") | |
| [[ ${MPI_MAJOR} < 3 ]] && echo "MPICH must be >= 3.0" && exit 1 | |
| echo "https://www.mpich.org/static/downloads/${{ env.MPI_VERSION }}/mpich-${{ env.MPI_VERSION}}.tar.gz" | |
| wget -q https://www.mpich.org/static/downloads/${{ env.MPI_VERSION }}/mpich-${{ env.MPI_VERSION}}.tar.gz --output-document mpich-${{ env.MPI_VERSION }}.tar.gz || (echo "An Error occurred while downloading MPICH '${{ env.MPI_VERSION }}'. Is it a valid version of MPICH?" && exit 1) | |
| tar -zxvf mpich-${{ env.MPI_VERSION }}.tar.gz | |
| cd mpich-${{ env.MPI_VERSION}} | |
| DISABLE_FORTRAN_FLAGS="" | |
| if (( ${MPI_MAJOR} >= 4 )) || ( ((${MPI_MAJOR} >= 3)) && ((${MPI_MINOR} >= 2)) ); then | |
| # MPICH >= 3.2 has --disable-fortran | |
| DISABLE_FORTRAN_FLAGS="--disable-fortran" | |
| else | |
| DISABLE_FORTRAN_FLAGS="--disable-f77 --disable-fc" | |
| fi | |
| ./configure --prefix="${{ runner.temp }}/mpi" --with-device=ch3 ${DISABLE_FORTRAN_FLAGS} | |
| make -j `nproc` | |
| make install -j `nproc` | |
| echo "${{ runner.temp }}/mpi/bin" >> $GITHUB_PATH | |
| echo "LD_LIBRARY_PATH=${{ runner.temp }}/mpi/lib:${LD_LIBRARY_PATH}" >> $GITHUB_ENV | |
| echo "LD_RUN_PATH=${{ runner.temp }}/mpi/lib:${LD_RUN_PATH}" >> $GITHUB_ENV | |
| - name: Select Python | |
| if: ${{ env.PYTHON != '' && env.FLAMEGPU_BUILD_PYTHON == 'ON' }} | |
| uses: actions/setup-python@v4 | |
| with: | |
| python-version: ${{ env.PYTHON }} | |
| - name: Install python dependencies | |
| if: ${{ env.PYTHON != '' && env.FLAMEGPU_BUILD_PYTHON == 'ON' }} | |
| run: | | |
| sudo apt-get install python3-venv | |
| python3 -m pip install --upgrade wheel build setuptools | |
| - name: Install Visualisation Dependencies | |
| if: ${{ startswith(env.OS, 'ubuntu') && env.VISUALISATION == 'ON' }} | |
| run: | | |
| # Install ubuntu-20.04 packages | |
| if [ "$OS" == 'ubuntu-20.04' ]; then | |
| sudo apt-get install -y libglew-dev libfontconfig1-dev libsdl2-dev libdevil-dev libfreetype-dev | |
| fi | |
| # Install Ubuntu 18.04 packages | |
| if [ "$OS" == 'ubuntu-18.04' ]; then | |
| sudo apt-get install -y libglew-dev libfontconfig1-dev libsdl2-dev libdevil-dev libfreetype6-dev libgl1-mesa-dev | |
| fi | |
| - name: Install Swig >= 4.0.2 | |
| run: | | |
| # Remove existing swig install, so CMake finds the correct swig | |
| if [ "$OS" == 'ubuntu-20.04' ]; then | |
| sudo apt-get remove -y swig swig4.0 | |
| fi | |
| # Install Ubuntu 18.04 packages | |
| if [ "$OS" == 'ubuntu-18.04' ]; then | |
| sudo apt-get remove -y swig | |
| fi | |
| # Install additional apt-based dependencies required to build swig 4.0.2 | |
| sudo apt-get install -y bison | |
| # Create a local directory to build swig in. | |
| mkdir -p swig-from-source && cd swig-from-source | |
| # Install SWIG building from source dependencies | |
| wget https://github.com/swig/swig/archive/refs/tags/v4.0.2.tar.gz | |
| tar -zxf v4.0.2.tar.gz | |
| cd swig-4.0.2/ | |
| ./autogen.sh | |
| ./configure | |
| make | |
| sudo make install | |
| # This pre-emptively patches a bug where ManyLinux didn't generate buildnumber as git dir was owned by diff user | |
| - name: Enable git safe-directory | |
| run: git config --global --add safe.directory $GITHUB_WORKSPACE | |
| - name: Configure cmake | |
| run: > | |
| cmake . -B "${{ env.BUILD_DIR }}" | |
| -DCMAKE_BUILD_TYPE="${{ env.CONFIG }}" | |
| -Werror=dev | |
| -DCMAKE_WARN_DEPRECATED="OFF" | |
| -DFLAMEGPU_WARNINGS_AS_ERRORS="ON" | |
| -DCMAKE_CUDA_ARCHITECTURES="${{ env.CUDA_ARCH }}" | |
| -DFLAMEGPU_BUILD_TESTS="${{ env.FLAMEGPU_BUILD_TESTS }}" | |
| -DFLAMEGPU_BUILD_PYTHON="${{ env.FLAMEGPU_BUILD_PYTHON }}" | |
| -DPYTHON3_EXACT_VERSION="${{ env.PYTHON }}" | |
| -DFLAMEGPU_VISUALISATION="${{ env.VISUALISATION }}" | |
| -DFLAMEGPU_ENABLE_MPI="ON" | |
| -DFLAMEGPU_ENABLE_NVTX="ON" | |
| ${MPI_OVERRIDE_CXX_OPTIONS} | |
| - name: Reconfigure cmake fixing MPICH from apt | |
| if: ${{ env.MPI_VERSION == 'apt' && env.MPI_LIB == 'mpich' }} | |
| run: > | |
| cmake . -B "${{ env.BUILD_DIR }}" | |
| -DMPI_CXX_COMPILE_OPTIONS="" | |
| - name: Build static library | |
| working-directory: ${{ env.BUILD_DIR }} | |
| run: cmake --build . --target flamegpu --verbose -j `nproc` | |
| - name: Build python wheel | |
| if: ${{ env.FLAMEGPU_BUILD_PYTHON == 'ON' }} | |
| working-directory: ${{ env.BUILD_DIR }} | |
| run: cmake --build . --target pyflamegpu --verbose -j `nproc` | |
| - name: Build tests | |
| if: ${{ env.FLAMEGPU_BUILD_TESTS == 'ON' }} | |
| working-directory: ${{ env.BUILD_DIR }} | |
| run: cmake --build . --target tests --verbose -j `nproc` | |
| - name: Build tests_mpi | |
| if: ${{ env.FLAMEGPU_BUILD_TESTS == 'ON' }} | |
| working-directory: ${{ env.BUILD_DIR }} | |
| run: cmake --build . --target tests_mpi --verbose -j `nproc` | |
| - name: Build ensemble example | |
| working-directory: ${{ env.BUILD_DIR }} | |
| run: cmake --build . --target ensemble --verbose -j `nproc` | |
| - name: Build all remaining targets | |
| working-directory: ${{ env.BUILD_DIR }} | |
| run: cmake --build . --target all --verbose -j `nproc` |