&color=rgb(191%2C%2057%2C%20137))
WEB GUI to calculate your PSU needs.
https://draftshift.github.io/PowerCalc/
Specify steppers by current ant voltage as thats how most people define them in klipper configs. Add presets and components. Possibly a non pullrequest way to submit parts? (strong maybe)
At startup the program fetches the latest database json from this repo (if you wana add more part simply fork and pullrequest).
At the top you can find an input field to add your own custom parts that might not make it into the global json file
Below you can find the library for preconfigured parts.
Lastly you have the preset, none excist yet but later down the line we will try to add supports for things like premade LDO kits.
The powercalc simply sums up how many watts are needed for each voltage group. NOTE! If you run a raspberry pi of a 24V mainboard. simply change the voltage cell to 24V (tough a pi will not draw that much its important to take note in general for other uses).
You also have the option to save your current setup to a CSV file and load it for later use or sharing with others.
At the top you will find a remove button, to use simply click any entry anc confirm by clicking the button.
Every field is editable, though voltage is locked to 5,12,24,48,120,230 volts.
| Header | comment |
|---|---|
| Type | which category the component was pulled from |
| Component | basic partname |
| powerDraw (W) | How much wattage your parts draws at max |
| voltage (V) | Operating voltage |
| % | Load percentage that caps you part (like how beds are often at 80% in klipper config |
| Amount | Lets you specify multiple of the same part |
| Specific link | Link field for hidden gems like cheap ali hotends ect |
