Build guide

git clone git://git.yoctoproject.org/poky -b gatesgarth

cd poky

git clone git://git.yoctoproject.org/meta-rockchip -b gatesgarth
git clone git://git.yoctoproject.org/meta-arm -b gatesgarth
git clone git://git.openembedded.org/meta-python2 -b gatesgarth
git clone git://git.openembedded.org/meta-openembedded -b gatesgarth
git clone https://github.com/mitchdz/meta-asus-tinkerboard-mitchdz

cd ../

mkdir -p build && cd build

# use meta-asus-tinkerboard-mitchdz local.conf.sample and bblayers.conf.sample
sed -i 's/poky/smes/g' ../asus-tinkerboard-mitchdz/.templateconf
. ../poky/oe-init-build-env .

bitbake core-image

ASUS Tinker Board specifications summary

Processor

• Rockchip RK3288 Cortex-A17 Quad-core SoC
  • Quad-core up to 1.6GHz or single-core up to 1.8GHz.
  • The CPU will operate at full capacity, take note of heat dissipation and AC adaptor stability.

GPU

• ARM Mali-T764 GPU

Display

• 1 x HDMI (up to 4K)
• 1 x 15-pint MIPI DSI (up to 1080p)
  • iGPU only supports H.264/H.265 4K hardware decoders

Memory Size

• Dual-CH LPDDR3 2GB

Storage

• Micro SD(TF) card slot

Connectivity

• RTL8211E-VB-CG GB LAN
• AW-NB1777NF 802.1 b/g/n wireless
• BT 4.0 + EDR

AUDIO

• RTL ALC4040 Codec with 1 x 3.5mm audio jack

USB

• 4 x USB 2.0 ports

Camera Interface

• 1 x 15-pin MIPI CSI slot for camera

Internal headers

• 1 x 40-pin header
  • up to 28 x GPIO pins
  • up to 2 x SPI bus
  • up to 2 x 12C bus
  • up to 4 x UART
  • up to 2 x PWM
  • up to 1 x PCM/12S
  • 2 x 5V power pins
  • 2 x 3.3V power pins
  • 8 x ground pins
• 1 x 2-pin contact point
  • 1 x PWM signal
  • 1 x S/PDIF signal

Power Connector

• Micro USB

OS Support

• Debian

Dimension

• 3.37" x 2.125"

Warrant

• 1 year