README.md

Greenhouse Gas Monitoring Tower Datalogger Program

Vineyard Pilot Study (2015)

This is an adaption of the datalogger program running at greenhouse gas monitoring towers which are part of the REACCH project. The program combines 10 Hz measurements of CO2 and H2O with 3D wind speeds to generate near real-time surface fluxes of CO2, latent & sensible heat. Additional meteorological statistics are produced at 5 & 30 minute intervals.

The main repository (here) contains the datalogger program only. A second, private repository hosts deployment-specific information like network addresses and access credentials.

• Main repository (public): https://bitbucket.org/wsular/2015-vineyard-tower-logger
• Deployment-specific (private): https://bitbucket.org/wsular/2015-vineyard-tower-secrets

Pre-requisites

• CR3000
  • network-enabled with an NL115 module
  • CR3000.Std.31 or newer firmware
• Base sensor suite
  • Infrared CO₂/H₂O analyzer with ultrasonic anemometer (EC150 + CSAT3A)
  • Cup and vane wind set (034B)
  • Temperature/humidity probe (HMP-155A)
  • Net radiometer (NL-Lite2)
  • PAR sensor (LI-190SB)
  • Tipping bucket rain gage (TE525WS)
• Optional sensors
  • Soil moisture/temperature probes (TDR-315L)
  • Soil heat flux plates (HFP01)
  • Spectral reflectance (NDVI/PRI) sensors (SRS series)
• Communications & power hardware
  • GPS receiver (GPS16X-HVS)
  • modem
  • ?

LTAR Common Observatory Repository (CORe)

Details here. Also available: JSON field name lookup table

License

This work is licensed under The MIT License adapted from proprietary works purchased from Campbell Scientific Inc, who reserves all rights to that original work (which is not present in this repository).