A library to support the benchmarking of functions, similar to unit-tests.
Discussion group: https://groups.google.com/d/forum/benchmark-discuss
IRC channel: https://freenode.net #googlebenchmark
Known issues and common problems
Additional Tooling Documentation
Define a function that executes the code to be measured.
static void BM_StringCreation(benchmark::State& state) {
while (state.KeepRunning())
std::string empty_string;
}
// Register the function as a benchmark
BENCHMARK(BM_StringCreation);
// Define another benchmark
static void BM_StringCopy(benchmark::State& state) {
std::string x = "hello";
while (state.KeepRunning())
std::string copy(x);
}
BENCHMARK(BM_StringCopy);
BENCHMARK_MAIN();Sometimes a family of benchmarks can be implemented with just one routine that
takes an extra argument to specify which one of the family of benchmarks to
run. For example, the following code defines a family of benchmarks for
measuring the speed of memcpy() calls of different lengths:
static void BM_memcpy(benchmark::State& state) {
char* src = new char[state.range(0)];
char* dst = new char[state.range(0)];
memset(src, 'x', state.range(0));
while (state.KeepRunning())
memcpy(dst, src, state.range(0));
state.SetBytesProcessed(int64_t(state.iterations()) *
int64_t(state.range(0)));
delete[] src;
delete[] dst;
}
BENCHMARK(BM_memcpy)->Arg(8)->Arg(64)->Arg(512)->Arg(1<<10)->Arg(8<<10);The preceding code is quite repetitive, and can be replaced with the following short-hand. The following invocation will pick a few appropriate arguments in the specified range and will generate a benchmark for each such argument.
BENCHMARK(BM_memcpy)->Range(8, 8<<10);By default the arguments in the range are generated in multiples of eight and the command above selects [ 8, 64, 512, 4k, 8k ]. In the following code the range multiplier is changed to multiples of two.
BENCHMARK(BM_memcpy)->RangeMultiplier(2)->Range(8, 8<<10);Now arguments generated are [ 8, 16, 32, 64, 128, 256, 512, 1024, 2k, 4k, 8k ].
You might have a benchmark that depends on two or more inputs. For example, the following code defines a family of benchmarks for measuring the speed of set insertion.
static void BM_SetInsert(benchmark::State& state) {
while (state.KeepRunning()) {
state.PauseTiming();
std::set<int> data = ConstructRandomSet(state.range(0));
state.ResumeTiming();
for (int j = 0; j < state.range(1); ++j)
data.insert(RandomNumber());
}
}
BENCHMARK(BM_SetInsert)
->Args({1<<10, 1})
->Args({1<<10, 8})
->Args({1<<10, 64})
->Args({1<<10, 512})
->Args({8<<10, 1})
->Args({8<<10, 8})
->Args({8<<10, 64})
->Args({8<<10, 512});The preceding code is quite repetitive, and can be replaced with the following short-hand. The following macro will pick a few appropriate arguments in the product of the two specified ranges and will generate a benchmark for each such pair.
BENCHMARK(BM_SetInsert)->Ranges({{1<<10, 8<<10}, {1, 512}});For more complex patterns of inputs, passing a custom function to Apply allows
programmatic specification of an arbitrary set of arguments on which to run the
benchmark. The following example enumerates a dense range on one parameter,
and a sparse range on the second.
static void CustomArguments(benchmark::internal::Benchmark* b) {
for (int i = 0; i <= 10; ++i)
for (int j = 32; j <= 1024*1024; j *= 8)
b->Args({i, j});
}
BENCHMARK(BM_SetInsert)->Apply(CustomArguments);Asymptotic complexity might be calculated for a family of benchmarks. The following code will calculate the coefficient for the high-order term in the running time and the normalized root-mean square error of string comparison.
static void BM_StringCompare(benchmark::State& state) {
std::string s1(state.range(0), '-');
std::string s2(state.range(0), '-');
while (state.KeepRunning()) {
benchmark::DoNotOptimize(s1.compare(s2));
}
state.SetComplexityN(state.range(0));
}
BENCHMARK(BM_StringCompare)
->RangeMultiplier(2)->Range(1<<10, 1<<18)->Complexity(benchmark::oN);As shown in the following invocation, asymptotic complexity might also be calculated automatically.
BENCHMARK(BM_StringCompare)
->RangeMultiplier(2)->Range(1<<10, 1<<18)->Complexity();The following code will specify asymptotic complexity with a lambda function, that might be used to customize high-order term calculation.
BENCHMARK(BM_StringCompare)->RangeMultiplier(2)
->Range(1<<10, 1<<18)->Complexity([](int n)->double{return n; });Templated benchmarks work the same way: This example produces and consumes
messages of size sizeof(v) range_x times. It also outputs throughput in the
absence of multiprogramming.
template <class Q> int BM_Sequential(benchmark::State& state) {
Q q;
typename Q::value_type v;
while (state.KeepRunning()) {
for (int i = state.range(0); i--; )
q.push(v);
for (int e = state.range(0); e--; )
q.Wait(&v);
}
// actually messages, not bytes:
state.SetBytesProcessed(
static_cast<int64_t>(state.iterations())*state.range(0));
}
BENCHMARK_TEMPLATE(BM_Sequential, WaitQueue<int>)->Range(1<<0, 1<<10);Three macros are provided for adding benchmark templates.
#if __cplusplus >= 201103L // C++11 and greater.
#define BENCHMARK_TEMPLATE(func, ...) // Takes any number of parameters.
#else // C++ < C++11
#define BENCHMARK_TEMPLATE(func, arg1)
#endif
#define BENCHMARK_TEMPLATE1(func, arg1)
#define BENCHMARK_TEMPLATE2(func, arg1, arg2)In C++11 it is possible to define a benchmark that takes an arbitrary number
of extra arguments. The BENCHMARK_CAPTURE(func, test_case_name, ...args)
macro creates a benchmark that invokes func with the benchmark::State as
the first argument followed by the specified args....
The test_case_name is appended to the name of the benchmark and
should describe the values passed.
template <class ...ExtraArgs>`
void BM_takes_args(benchmark::State& state, ExtraArgs&&... extra_args) {
[...]
}
// Registers a benchmark named "BM_takes_args/int_string_test` that passes
// the specified values to `extra_args`.
BENCHMARK_CAPTURE(BM_takes_args, int_string_test, 42, std::string("abc"));Note that elements of ...args may refer to global variables. Users should
avoid modifying global state inside of a benchmark.
The RegisterBenchmark(name, func, args...) function provides an alternative
way to create and register benchmarks.
RegisterBenchmark(name, func, args...) creates, registers, and returns a
pointer to a new benchmark with the specified name that invokes
func(st, args...) where st is a benchmark::State object.
Unlike the BENCHMARK registration macros, which can only be used at the global
scope, the RegisterBenchmark can be called anywhere. This allows for
benchmark tests to be registered programmatically.
Additionally RegisterBenchmark allows any callable object to be registered
as a benchmark. Including capturing lambdas and function objects. This
allows the creation
For Example:
auto BM_test = [](benchmark::State& st, auto Inputs) { /* ... */ };
int main(int argc, char** argv) {
for (auto& test_input : { /* ... */ })
benchmark::RegisterBenchmark(test_input.name(), BM_test, test_input);
benchmark::Initialize(&argc, argv);
benchmark::RunSpecifiedBenchmarks();
}In a multithreaded test (benchmark invoked by multiple threads simultaneously),
it is guaranteed that none of the threads will start until all have called
KeepRunning, and all will have finished before KeepRunning returns false. As
such, any global setup or teardown can be wrapped in a check against the thread
index:
static void BM_MultiThreaded(benchmark::State& state) {
if (state.thread_index == 0) {
// Setup code here.
}
while (state.KeepRunning()) {
// Run the test as normal.
}
if (state.thread_index == 0) {
// Teardown code here.
}
}
BENCHMARK(BM_MultiThreaded)->Threads(2);If the benchmarked code itself uses threads and you want to compare it to single-threaded code, you may want to use real-time ("wallclock") measurements for latency comparisons:
BENCHMARK(BM_test)->Range(8, 8<<10)->UseRealTime();Without UseRealTime, CPU time is used by default.
For benchmarking something for which neither CPU time nor real-time are
correct or accurate enough, completely manual timing is supported using
the UseManualTime function.
When UseManualTime is used, the benchmarked code must call
SetIterationTime once per iteration of the KeepRunning loop to
report the manually measured time.
An example use case for this is benchmarking GPU execution (e.g. OpenCL
or CUDA kernels, OpenGL or Vulkan or Direct3D draw calls), which cannot
be accurately measured using CPU time or real-time. Instead, they can be
measured accurately using a dedicated API, and these measurement results
can be reported back with SetIterationTime.
static void BM_ManualTiming(benchmark::State& state) {
int microseconds = state.range(0);
std::chrono::duration<double, std::micro> sleep_duration {
static_cast<double>(microseconds)
};
while (state.KeepRunning()) {
auto start = std::chrono::high_resolution_clock::now();
// Simulate some useful workload with a sleep
std::this_thread::sleep_for(sleep_duration);
auto end = std::chrono::high_resolution_clock::now();
auto elapsed_seconds =
std::chrono::duration_cast<std::chrono::duration<double>>(
end - start);
state.SetIterationTime(elapsed_seconds.count());
}
}
BENCHMARK(BM_ManualTiming)->Range(1, 1<<17)->UseManualTime();To prevent a value or expression from being optimized away by the compiler
the benchmark::DoNotOptimize(...) and benchmark::ClobberMemory()
functions can be used.
static void BM_test(benchmark::State& state) {
while (state.KeepRunning()) {
int x = 0;
for (int i=0; i < 64; ++i) {
benchmark::DoNotOptimize(x += i);
}
}
}DoNotOptimize(<expr>) forces the result of <expr> to be stored in either
memory or a register. For GNU based compilers it acts as read/write barrier
for global memory. More specifically it forces the compiler to flush pending
writes to memory and reload any other values as necessary.
Note that DoNotOptimize(<expr>) does not prevent optimizations on <expr>
in any way. <expr> may even be removed entirely when the result is already
known. For example:
/* Example 1: `<expr>` is removed entirely. */
int foo(int x) { return x + 42; }
while (...) DoNotOptimize(foo(0)); // Optimized to DoNotOptimize(42);
/* Example 2: Result of '<expr>' is only reused */
int bar(int) __attribute__((const));
while (...) DoNotOptimize(bar(0)); // Optimized to:
// int __result__ = bar(0);
// while (...) DoNotOptimize(__result__);The second tool for preventing optimizations is ClobberMemory(). In essence
ClobberMemory() forces the compiler to perform all pending writes to global
memory. Memory managed by block scope objects must be "escaped" using
DoNotOptimize(...) before it can be clobbered. In the below example
ClobberMemory() prevents the call to v.push_back(42) from being optimized
away.
static void BM_vector_push_back(benchmark::State& state) {
while (state.KeepRunning()) {
std::vector<int> v;
v.reserve(1);
benchmark::DoNotOptimize(v.data()); // Allow v.data() to be clobbered.
v.push_back(42);
benchmark::ClobberMemory(); // Force 42 to be written to memory.
}
}Note that ClobberMemory() is only available for GNU based compilers.
If a benchmark runs a few milliseconds it may be hard to visually compare the measured times, since the output data is given in nanoseconds per default. In order to manually set the time unit, you can specify it manually:
BENCHMARK(BM_test)->Unit(benchmark::kMillisecond);In all cases, the number of iterations for which the benchmark is run is
governed by the amount of time the benchmark takes. Concretely, the number of
iterations is at least one, not more than 1e9, until CPU time is greater than
the minimum time, or the wallclock time is 5x minimum time. The minimum time is
set as a flag --benchmark_min_time or per benchmark by calling MinTime on
the registered benchmark object.
By default each benchmark is run once and that single result is reported. However benchmarks are often noisy and a single result may not be representative of the overall behavior. For this reason it's possible to repeatedly rerun the benchmark.
The number of runs of each benchmark is specified globally by the
--benchmark_repetitions flag or on a per benchmark basis by calling
Repetitions on the registered benchmark object. When a benchmark is run
more than once the mean and standard deviation of the runs will be reported.
Additionally the --benchmark_report_aggregates_only={true|false} flag or
ReportAggregatesOnly(bool) function can be used to change how repeated tests
are reported. By default the result of each repeated run is reported. When this
option is 'true' only the mean and standard deviation of the runs is reported.
Calling ReportAggregatesOnly(bool) on a registered benchmark object overrides
the value of the flag for that benchmark.
Fixture tests are created by first defining a type that derives from ::benchmark::Fixture and then creating/registering the tests using the following macros:
BENCHMARK_F(ClassName, Method)BENCHMARK_DEFINE_F(ClassName, Method)BENCHMARK_REGISTER_F(ClassName, Method)
For Example:
class MyFixture : public benchmark::Fixture {};
BENCHMARK_F(MyFixture, FooTest)(benchmark::State& st) {
while (st.KeepRunning()) {
...
}
}
BENCHMARK_DEFINE_F(MyFixture, BarTest)(benchmark::State& st) {
while (st.KeepRunning()) {
...
}
}
/* BarTest is NOT registered */
BENCHMARK_REGISTER_F(MyFixture, BarTest)->Threads(2);
/* BarTest is now registered */When errors caused by external influences, such as file I/O and network
communication, occur within a benchmark the
State::SkipWithError(const char* msg) function can be used to skip that run
of benchmark and report the error. Note that only future iterations of the
KeepRunning() are skipped. Users may explicitly return to exit the
benchmark immediately.
The SkipWithError(...) function may be used at any point within the benchmark,
including before and after the KeepRunning() loop.
For example:
static void BM_test(benchmark::State& state) {
auto resource = GetResource();
if (!resource.good()) {
state.SkipWithError("Resource is not good!");
// KeepRunning() loop will not be entered.
}
while (state.KeepRunning()) {
auto data = resource.read_data();
if (!resource.good()) {
state.SkipWithError("Failed to read data!");
break; // Needed to skip the rest of the iteration.
}
do_stuff(data);
}
}The --benchmark_filter=<regex> option can be used to only run the benchmarks
which match the specified <regex>. For example:
$ ./run_benchmarks.x --benchmark_filter=BM_memcpy/32
Run on (1 X 2300 MHz CPU )
2016-06-25 19:34:24
Benchmark Time CPU Iterations
----------------------------------------------------
BM_memcpy/32 11 ns 11 ns 79545455
BM_memcpy/32k 2181 ns 2185 ns 324074
BM_memcpy/32 12 ns 12 ns 54687500
BM_memcpy/32k 1834 ns 1837 ns 357143The library supports multiple output formats. Use the
--benchmark_format=<console|json|csv> flag to set the format type. console
is the default format.
The Console format is intended to be a human readable format. By default the format generates color output. Context is output on stderr and the tabular data on stdout. Example tabular output looks like:
Benchmark Time(ns) CPU(ns) Iterations
----------------------------------------------------------------------
BM_SetInsert/1024/1 28928 29349 23853 133.097kB/s 33.2742k items/s
BM_SetInsert/1024/8 32065 32913 21375 949.487kB/s 237.372k items/s
BM_SetInsert/1024/10 33157 33648 21431 1.13369MB/s 290.225k items/s
The JSON format outputs human readable json split into two top level attributes.
The context attribute contains information about the run in general, including
information about the CPU and the date.
The benchmarks attribute contains a list of ever benchmark run. Example json
output looks like:
{
"context": {
"date": "2015/03/17-18:40:25",
"num_cpus": 40,
"mhz_per_cpu": 2801,
"cpu_scaling_enabled": false,
"build_type": "debug"
},
"benchmarks": [
{
"name": "BM_SetInsert/1024/1",
"iterations": 94877,
"real_time": 29275,
"cpu_time": 29836,
"bytes_per_second": 134066,
"items_per_second": 33516
},
{
"name": "BM_SetInsert/1024/8",
"iterations": 21609,
"real_time": 32317,
"cpu_time": 32429,
"bytes_per_second": 986770,
"items_per_second": 246693
},
{
"name": "BM_SetInsert/1024/10",
"iterations": 21393,
"real_time": 32724,
"cpu_time": 33355,
"bytes_per_second": 1199226,
"items_per_second": 299807
}
]
}The CSV format outputs comma-separated values. The context is output on stderr
and the CSV itself on stdout. Example CSV output looks like:
name,iterations,real_time,cpu_time,bytes_per_second,items_per_second,label
"BM_SetInsert/1024/1",65465,17890.7,8407.45,475768,118942,
"BM_SetInsert/1024/8",116606,18810.1,9766.64,3.27646e+06,819115,
"BM_SetInsert/1024/10",106365,17238.4,8421.53,4.74973e+06,1.18743e+06,
The library supports writing the output of the benchmark to a file specified
by --benchmark_out=<filename>. The format of the output can be specified
using --benchmark_out_format={json|console|csv}. Specifying
--benchmark_out does not suppress the console output.
By default, benchmark builds as a debug library. You will see a warning in the output when this is the case. To build it as a release library instead, use:
cmake -DCMAKE_BUILD_TYPE=Release
To enable link-time optimisation, use
cmake -DCMAKE_BUILD_TYPE=Release -DBENCHMARK_ENABLE_LTO=true
When using gcc, it is necessary to link against pthread to avoid runtime exceptions. This is due to how gcc implements std::thread. See issue #67 for more details.
Google Benchmark uses C++11 when building the library. As such we require a modern C++ toolchain, both compiler and standard library.
The following minimum versions are strongly recommended build the library:
- GCC 4.8
- Clang 3.4
- Visual Studio 2013
Anything older may work.
Note: Using the library and its headers in C++03 is supported. C++11 is only required to build the library.
- Users must manually link
shlwapi.lib. Failure to do so may result in unresolved symbols.