Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Cold boot SD Card is fine but warm boot is shutdown instead #81

Open
samiux opened this issue Sep 17, 2023 · 6 comments
Open

Cold boot SD Card is fine but warm boot is shutdown instead #81

samiux opened this issue Sep 17, 2023 · 6 comments

Comments

@samiux
Copy link

samiux commented Sep 17, 2023

I am running 202306 and 202308 SD card images.

VisionFive2 boot SD card is fine but warm boot is shutdown instead, i.e. it cannot be reboot.

Any idea?

@MichaelZhuxx
Copy link
Collaborator

would you please paste any system log here?

@samiux
Copy link
Author

samiux commented Sep 17, 2023

dmesg output :

[ 0.000000] Linux version 5.15.0-starfive (sw_buildbot@mdcsw01) (riscv64-unknown-linux-gnu-gcc (GCC) 10.2.0, GNU ld (GNU Binutils) 2.35) #1 SMP Wed Aug 23 11:18:20 CST 2023
[ 0.000000] OF: fdt: Ignoring memory range 0x40000000 - 0x40200000
[ 0.000000] Machine model: StarFive VisionFive V2
[ 0.000000] earlycon: uart0 at MMIO32 0x0000000010000000 (options '115200')
[ 0.000000] printk: bootconsole [uart0] enabled
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created CMA memory pool at 0x0000000070000000, size 1536 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] Zone ranges:
[ 0.000000] DMA32 [mem 0x0000000040200000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000023fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000040200000-0x000000023fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000040200000-0x000000023fffffff]
[ 0.000000] SBI specification v1.0 detected
[ 0.000000] SBI implementation ID=0x1 Version=0x10002
[ 0.000000] SBI TIME extension detected
[ 0.000000] SBI IPI extension detected
[ 0.000000] SBI RFENCE extension detected
[ 0.000000] SBI SRST extension detected
[ 0.000000] SBI v0.2 HSM extension detected
[ 0.000000] CPU with hartid=0 is not available
[ 0.000000] CPU with hartid=0 is not available
[ 0.000000] riscv: base ISA extensions acdfim
[ 0.000000] riscv: ELF capabilities acdfim
[ 0.000000] percpu: Embedded 18 pages/cpu s34024 r8192 d31512 u73728
[ 0.000000] pcpu-alloc: s34024 r8192 d31512 u73728 alloc=18*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2067975
[ 0.000000] Kernel command line: root=/dev/mmcblk1p4 rw console=tty0 console=ttyS0,115200 earlycon rootwait stmmaceth=chain_mode:1 selinux=0
[ 0.000000] Unknown command line parameters: stmmaceth=chain_mode:1 selinux=0
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] mem auto-init: stack:byref_all(zero), heap alloc:off, heap free:off
[ 0.000000] software IO TLB: mapped [mem 0x00000000fbfff000-0x00000000fffff000] (64MB)
[ 0.000000] Memory: 6518600K/8386560K available (10622K kernel code, 5022K rwdata, 4096K rodata, 2197K init, 668K bss, 295096K reserved, 1572864K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] rcu: RCU debug extended QS entry/exit.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] CPU with hartid=0 is not available
[ 0.000000] riscv-intc: unable to find hart id for /cpus/cpu@0/interrupt-controller
[ 0.000000] riscv-intc: 64 local interrupts mapped
[ 0.000000] plic: plic@c000000: mapped 136 interrupts with 4 handlers for 9 contexts.
[ 0.000000] random: get_random_bytes called from start_kernel+0x4dc/0x6f6 with crng_init=0
[ 0.000000] riscv_timer_init_dt: Registering clocksource cpuid [0] hartid [1]
[ 0.000000] clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x1d854df40, max_idle_ns: 881590404240 ns
[ 0.000001] sched_clock: 64 bits at 4MHz, resolution 250ns, wraps every 2199023255500ns
[ 0.008995] clocksource: [email protected]: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[ 0.020317] clocksource: [email protected]: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[ 0.031638] clocksource: [email protected]: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[ 0.042960] clocksource: [email protected]: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[ 0.054505] Console: colour dummy device 80x25
[ 0.060690] printk: console [tty0] enabled
[ 0.065246] Calibrating delay loop (skipped), value calculated using timer frequency.. 8.00 BogoMIPS (lpj=40000)
[ 0.076469] pid_max: default: 32768 minimum: 301
[ 0.081801] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.090305] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.100533] ASID allocator disabled
[ 0.104469] rcu: Hierarchical SRCU implementation.
[ 0.109919] EFI services will not be available.
[ 0.115289] smp: Bringing up secondary CPUs ...
[ 0.121880] smp: Brought up 1 node, 4 CPUs
[ 0.128219] devtmpfs: initialized
[ 0.139704] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.150570] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.199437] pinctrl core: initialized pinctrl subsystem
[ 0.206089] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.214828] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.223986] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.233308] thermal_sys: Registered thermal governor 'step_wise'
[ 0.233643] cpuidle: using governor menu
[ 0.267791] platform soc:dsi-output: Fixing up cyclic dependency with 29400000.dc8200
[ 0.276955] platform 295d0000.mipi: Fixing up cyclic dependency with soc:dsi-output
[ 0.285790] platform 29590000.hdmi: Fixing up cyclic dependency with 29400000.dc8200
[ 0.306045] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.313428] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.324270] vgaarb: loaded
[ 0.327490] SCSI subsystem initialized
[ 0.331788] libata version 3.00 loaded.
[ 0.331968] usbcore: registered new interface driver usbfs
[ 0.338043] usbcore: registered new interface driver hub
[ 0.344014] usbcore: registered new device driver usb
[ 0.349797] mc: Linux media interface: v0.10
[ 0.354534] videodev: Linux video capture interface: v2.00
[ 0.360766] Advanced Linux Sound Architecture Driver Initialized.
[ 0.367842] Bluetooth: Core ver 2.22
[ 0.371800] NET: Registered PF_BLUETOOTH protocol family
[ 0.377656] Bluetooth: HCI device and connection manager initialized
[ 0.384654] Bluetooth: HCI socket layer initialized
[ 0.390039] Bluetooth: L2CAP socket layer initialized
[ 0.395609] Bluetooth: SCO socket layer initialized
[ 0.401300] clocksource: Switched to clocksource riscv_clocksource
[ 0.408337] FS-Cache: Loaded
[ 0.418634] NET: Registered PF_INET protocol family
[ 0.425124] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.440924] tcp_listen_portaddr_hash hash table entries: 4096 (order: 5, 163840 bytes, linear)
[ 0.450665] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.460196] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ 0.470356] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.477857] UDP hash table entries: 4096 (order: 6, 393216 bytes, linear)
[ 0.485854] UDP-Lite hash table entries: 4096 (order: 6, 393216 bytes, linear)
[ 0.494504] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.501265] RPC: Registered named UNIX socket transport module.
[ 0.507817] RPC: Registered udp transport module.
[ 0.513004] RPC: Registered tcp transport module.
[ 0.518179] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.526007] PCI: CLS 0 bytes, default 64
[ 0.531234] Initialise system trusted keyrings
[ 0.536306] workingset: timestamp_bits=62 max_order=21 bucket_order=0
[ 0.536409] Unpacking initramfs...
[ 0.549044] NFS: Registering the id_resolver key type
[ 0.554657] Key type id_resolver registered
[ 0.559273] Key type id_legacy registered
[ 0.563805] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.571200] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 0.579424] ntfs: driver 2.1.32 [Flags: R/W].
[ 0.584511] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.591697] fuse: init (API version 7.34)
[ 0.634677] NET: Registered PF_ALG protocol family
[ 0.639991] Key type asymmetric registered
[ 0.644531] Asymmetric key parser 'x509' registered
[ 0.650008] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.658199] io scheduler mq-deadline registered
[ 0.663215] io scheduler kyber registered
[ 0.670010] start plist test
[ 0.675614] end plist test
[ 0.770757] clk-starfive-jh7110 13020000.clock-controller: starfive JH7110 clkgen init successfully.
[ 0.782184] L2CACHE: DataError @ 0x00000000.08040140
[ 0.787723] L2CACHE: DataFail @ 0x00000000.08040270
[ 0.793233] L2CACHE: No. of Banks in the cache: 8
[ 0.798424] L2CACHE: No. of ways per bank: 16
[ 0.803253] L2CACHE: Sets per bank: 256
[ 0.807497] L2CACHE: Bytes per cache block: 64
[ 0.812423] L2CACHE: Index of the largest way enabled: 15
[ 0.818728] jh7110-pmu 17030000.power-controller: registered 8 power domains
[ 0.884009] Freeing initrd memory: 4880K
[ 0.889772] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
[ 0.909771] loop: module loaded
[ 0.915746] spi-nor spi0.0: gd25lq128d (16384 Kbytes)
[ 0.939106] 3 fixed-partitions partitions found on MTD device 13010000.spi.0
[ 0.946920] Creating 3 MTD partitions on "13010000.spi.0":
[ 0.952991] 0x000000000000-0x000000040000 : "spl"
[ 0.959856] 0x000000100000-0x000000400000 : "uboot"
[ 0.966771] 0x000000f00000-0x000001000000 : "data"
[ 0.974639] libphy: Fixed MDIO Bus: probed
[ 0.980583] CAN device driver interface
[ 0.985424] starfive-eth-plat 16030000.ethernet: force_sf_dma_mode is ignored if force_thresh_dma_mode is set.
[ 0.996802] starfive-eth-plat 16030000.ethernet: User ID: 0x41, Synopsys ID: 0x52
[ 1.005083] starfive-eth-plat 16030000.ethernet: DWMAC4/5
[ 1.011136] starfive-eth-plat 16030000.ethernet: DMA HW capability register supported
[ 1.019779] starfive-eth-plat 16030000.ethernet: RX Checksum Offload Engine supported
[ 1.028420] starfive-eth-plat 16030000.ethernet: Wake-Up On Lan supported
[ 1.035976] starfive-eth-plat 16030000.ethernet: TSO supported
[ 1.042422] starfive-eth-plat 16030000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 1.051649] starfive-eth-plat 16030000.ethernet: Enabled Flow TC (entries=1)
[ 1.059411] starfive-eth-plat 16030000.ethernet: TSO feature enabled
[ 1.066417] starfive-eth-plat 16030000.ethernet: Using 40 bits DMA width
[ 1.326581] libphy: stmmac: probed
[ 1.330357] YT8531 Gigabit Ethernet stmmac-0:00: attached PHY driver (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
[ 1.341329] YT8531 Gigabit Ethernet stmmac-0:01: attached PHY driver (mii_bus:phy_addr=stmmac-0:01, irq=POLL)
[ 1.353441] starfive-eth-plat 16040000.ethernet: force_sf_dma_mode is ignored if force_thresh_dma_mode is set.
[ 1.364848] starfive-eth-plat 16040000.ethernet: User ID: 0x41, Synopsys ID: 0x52
[ 1.373128] starfive-eth-plat 16040000.ethernet: DWMAC4/5
[ 1.379179] starfive-eth-plat 16040000.ethernet: DMA HW capability register supported
[ 1.387822] starfive-eth-plat 16040000.ethernet: RX Checksum Offload Engine supported
[ 1.396464] starfive-eth-plat 16040000.ethernet: Wake-Up On Lan supported
[ 1.404015] starfive-eth-plat 16040000.ethernet: TSO supported
[ 1.410447] starfive-eth-plat 16040000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 1.419684] starfive-eth-plat 16040000.ethernet: Enabled Flow TC (entries=1)
[ 1.427461] starfive-eth-plat 16040000.ethernet: TSO feature enabled
[ 1.434471] starfive-eth-plat 16040000.ethernet: Using 40 bits DMA width
[ 1.693822] libphy: stmmac: probed
[ 1.697598] YT8531 Gigabit Ethernet stmmac-1:00: attached PHY driver (mii_bus:phy_addr=stmmac-1:00, irq=POLL)
[ 1.708561] YT8531 Gigabit Ethernet stmmac-1:01: attached PHY driver (mii_bus:phy_addr=stmmac-1:01, irq=POLL)
[ 1.721038] Intel(R) Wireless WiFi driver for Linux
[ 1.728759] cdns3-starfive 10210000.usbdrd: usb mode 2 2.0 probe success
[ 1.736951] usbcore: registered new interface driver uas
[ 1.742879] usbcore: registered new interface driver usb-storage
[ 1.750657] starfive-rtc 17040000.rtc: registered as rtc0
[ 1.756648] starfive-rtc 17040000.rtc: setting system clock to 2010-02-26T04:24:00 UTC (1267158240)
[ 1.766785] i2c_dev: i2c /dev entries driver
[ 1.772063] usbcore: registered new interface driver uvcvideo
[ 1.791335] thermal thermal_zone0: failed to read out thermal zone (-110)
[ 1.799462] starfive-wdt 13070000.wdog: Heartbeat: timeout=15, count/2=180000000 (0aba9500)
[ 1.809210] Bluetooth: HCI UART driver ver 2.3
[ 1.814138] Bluetooth: HCI UART protocol H4 registered
[ 1.820487] sdhci: Secure Digital Host Controller Interface driver
[ 1.827340] sdhci: Copyright(c) Pierre Ossman
[ 1.832189] Synopsys Designware Multimedia Card Interface Driver
[ 1.839125] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.846538] jh7110-sec 16000000.crypto: Unable to request sec_m dma channel in DMA channel
[ 1.855692] jh7110-sec 16000000.crypto: Cannot initial dma chan
[ 1.862529] usbcore: registered new interface driver usbhid
[ 1.868682] usbhid: USB HID core driver
[ 1.873128] riscv-pmu-sbi: SBI PMU extension is available
[ 1.879104] riscv-pmu-sbi: 16 firmware and 4 hardware counters
[ 1.885568] riscv-pmu-sbi: Perf sampling/filtering is not supported as sscof extension is not available
[ 1.896297] usbcore: registered new interface driver snd-usb-audio
[ 1.911857] NET: Registered PF_INET6 protocol family
[ 1.918588] Segment Routing with IPv6
[ 1.922691] In-situ OAM (IOAM) with IPv6
[ 1.927123] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 1.934242] NET: Registered PF_PACKET protocol family
[ 1.939824] can: controller area network core
[ 1.944724] NET: Registered PF_CAN protocol family
[ 1.950016] can: raw protocol
[ 1.953308] can: broadcast manager protocol
[ 1.957928] can: netlink gateway - max_hops=1
[ 1.963009] Bluetooth: RFCOMM TTY layer initialized
[ 1.968403] Bluetooth: RFCOMM socket layer initialized
[ 1.974124] Bluetooth: RFCOMM ver 1.11
[ 1.978273] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 1.984143] Bluetooth: BNEP filters: protocol multicast
[ 1.989915] Bluetooth: BNEP socket layer initialized
[ 1.995455] lib80211: common routines for IEEE802.11 drivers
[ 2.001711] lib80211_crypt: registered algorithm 'NULL'
[ 2.001726] lib80211_crypt: registered algorithm 'WEP'
[ 2.001740] lib80211_crypt: registered algorithm 'CCMP'
[ 2.001753] lib80211_crypt: registered algorithm 'TKIP'
[ 2.001879] 9pnet: Installing 9P2000 support
[ 2.006645] Key type dns_resolver registered
[ 2.012153] Loading compiled-in X.509 certificates
[ 2.053628] @@ dev ptr:ffffffe0bfefac00/1500/1
[ 2.058767] PVR_K: 1: Read BVNC 36.50.54.182 from HW device registers
[ 2.066070] PVR_K: 1: RGX Device registered BVNC 36.50.54.182 with 1 core in the system
[ 2.080490] pvrsrvkm 18000000.gpu: Direct firmware load for rgx.fw.36.50.54.182 failed with error -2
[ 2.090713] pvrsrvkm 18000000.gpu: Direct firmware load for rgx.fw.36.50p.54.182 failed with error -2
[ 2.101012] pvrsrvkm 18000000.gpu: Direct firmware load for rgx.fw failed with error -2
[ 2.109879] PVR_K:(Fatal): 1: All RGX Firmware image loads failed for 'rgx.fw.36.50.54.182' (PVRSRV_ERROR_NOT_FOUND) [1729]
[ 2.122589] PVR_K:(Error): 1: RGXInit: InitFirmware failed (278) [1542]
[ 2.130279] PVR_K:(Error): 1: RGXInit() failed (PVRSRV_ERROR_NOT_FOUND) in PVRSRVCommonDeviceInitialise() [2177]
[ 2.141907] PVR_K:(Error): 1: PVRSRVDeviceFinalise() failed (PVRSRV_ERROR_NOT_INITIALISED) in PVRSRVCommonDeviceInitialise() [2191]
[ 2.155383] [drm:pvr_drm_load] ERROR device (ptrval) initialisation failed (err=-19)
[ 2.166578] starfive_jh7110-pinctrl 13040000.gpio: StarFive GPIO chip registered 64 GPIOs
[ 2.176345] starfive_jh7110-pinctrl 17020000.gpio: StarFive GPIO chip registered 4 GPIOs
[ 2.185441] mailbox 13060000.mailbox: Mailbox enabled
[ 2.191209] pl08xdmac 16008000.sec_dma: initialized 8 virtual memcpy channels
[ 2.199111] pl08xdmac 16008000.sec_dma: initialized 16 virtual slave channels
[ 2.208606] debugfs: Directory '16008000.sec_dma' with parent 'dmaengine' already present!
[ 2.217781] pl08xdmac 16008000.sec_dma: DMA: PL080 rev0 at 0x16008000 irq 23
[ 2.225823] ssp-pl022 10060000.spi: ARM PL022 driver for StarFive SoC platform, device ID: 0x00041022
[ 2.236029] ssp-pl022 10060000.spi: mapped registers from 0x0000000010060000 to (ptrval)
[ 2.246146] ssp-pl022 10060000.spi: Requested frequency: 10000000 Hz is unsupported,select by default 8250000 Hz
[ 2.257749] ssp-pl022 10060000.spi: will use autosuspend for runtime pm, delay 100ms
[ 2.267651] i2c 2-0045: Fixing up cyclic dependency with 295d0000.mipi
[ 2.275137] seeed_panel 2-0045: Unknown Atmel firmware revision: 0x00
[ 2.282464] tinker_ft5406 2-0038: Address = 0x38
[ 2.287554] tinker_ft5406 2-0038: width = 800, height = 480, reverse = 1
[ 2.295094] tinker_ft5406 2-0038: i2c read error, -121
[ 2.300764] tinker_ft5406 2-0038: Checking touch ic failed
[ 2.306830] tinker_ft5406: probe of 2-0038 failed with error -121
[ 2.313965] Goodix-TS 2-0014: supply AVDD28 not found, using dummy regulator
[ 2.321874] Goodix-TS 2-0014: supply VDDIO not found, using dummy regulator
[ 2.441460] Goodix-TS 2-0014: i2c test failed attempt 1: -121
[ 2.481459] Goodix-TS 2-0014: i2c test failed attempt 2: -121
[ 2.521324] Goodix-TS 2-0014: I2C communication failure: -121
[ 2.527825] Goodix-TS: probe of 2-0014 failed with error -121
[ 2.534392] i2c 2-0020: Fixing up cyclic dependency with 295d0000.mipi
[ 2.542194] i2c 2-0019: Fixing up cyclic dependency with 295d0000.mipi
[ 2.550897] at24 5-0050: supply vcc not found, using dummy regulator
[ 2.558742] at24 5-0050: 512 byte 24c04 EEPROM, writable, 16 bytes/write
[ 2.568212] axp15060-regulator 5-0036: Register mipi_0p9 done! vol range:900 ~ 900 mV
[ 2.578350] axp15060-regulator 5-0036: Register hdmi_1p8 done! vol range:1800 ~ 1800 mV
[ 2.588718] axp15060-regulator 5-0036: Register sdio_vdd done! vol range:1800 ~ 1800 mV
[ 2.599059] axp15060-regulator 5-0036: Register hdmi_0p9 done! vol range:900 ~ 900 mV
[ 2.609212] axp15060-regulator 5-0036: Register vcc_3v3 done! vol range:3300 ~ 3300 mV
[ 2.619486] axp15060-regulator 5-0036: Register cpu_vdd done! vol range:500 ~ 1540 mV
[ 2.628924] i2c 6-0010: Fixing up cyclic dependency with 19800000.vin_sysctl
[ 2.637093] imx219 6-0010: supply VANA not found, using dummy regulator
[ 2.644517] imx219 6-0010: supply VDIG not found, using dummy regulator
[ 2.651901] imx219 6-0010: supply VDDL not found, using dummy regulator
[ 2.673920] imx219 6-0010: failed to read chip id 219
[ 2.679695] imx219: probe of 6-0010 failed with error -5
[ 2.685767] i2c 6-001a: Fixing up cyclic dependency with 19800000.vin_sysctl
[ 2.693915] imx708 6-001a: supply VANA1 not found, using dummy regulator
[ 2.701435] imx708 6-001a: supply VANA2 not found, using dummy regulator
[ 2.708867] imx708 6-001a: supply VDIG not found, using dummy regulator
[ 2.716262] imx708 6-001a: supply VDDL not found, using dummy regulator
[ 2.732891] imx708 6-001a: failed to read chip id 708, with error -5
[ 2.740150] imx708: probe of 6-001a failed with error -5
[ 2.746231] i2c 6-0036: Fixing up cyclic dependency with 19800000.vin_sysctl
[ 2.754216] ov4689 6-0036: supply DOVDD not found, using dummy regulator
[ 2.761738] ov4689 6-0036: supply AVDD not found, using dummy regulator
[ 2.769087] ov4689 6-0036: supply DVDD not found, using dummy regulator
[ 2.776651] ov4689 6-0036: ov4689_read_reg: error: reg=300a
[ 2.782821] ov4689 6-0036: ov4689_check_chip_id: failed to read chip identifier
[ 2.791104] ov4689: probe of 6-0036 failed with error -121
[ 2.799573] pcie_plda 2b000000.pcie: Failed to get power-gpio, but maybe it's always on.
[ 2.808709] pcie_plda 2b000000.pcie: host bridge /soc/pcie@2B000000 ranges:
[ 2.816445] pcie_plda 2b000000.pcie: MEM 0x0030000000..0x0037ffffff -> 0x0030000000
[ 2.825400] pcie_plda 2b000000.pcie: MEM 0x0900000000..0x093fffffff -> 0x0900000000
[ 2.834386] ATR entry: 0x0940000000 -> 0x0000000000 [0x0010000000] (param: 0x000001)
[ 2.842957] ATR entry: 0x0030000000 -> 0x0030000000 [0x0008000000] (param: 0x000000)
[ 2.851518] ATR entry: 0x0900000000 -> 0x0900000000 [0x0040000000] (param: 0x000000)
[ 3.201420] pcie_plda 2b000000.pcie: Port link up.
[ 3.206877] pcie_plda 2b000000.pcie: PCI host bridge to bus 0000:00
[ 3.213823] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 3.219891] pci_bus 0000:00: root bus resource [mem 0x30000000-0x37ffffff]
[ 3.227516] pci_bus 0000:00: root bus resource [mem 0x900000000-0x93fffffff pref]
[ 3.235826] pci 0000:00:00.0: [1556:1111] type 01 class 0x060400
[ 3.242478] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0xffffffff 64bit pref]
[ 3.250510] pci 0000:00:00.0: supports D1 D2
[ 3.255230] pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 3.266515] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 3.275514] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
[ 3.282172] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 3.289739] pci 0000:01:00.0: PME# supported from D0 D3cold
[ 3.299691] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 3.307032] pci 0000:00:00.0: BAR 0: no space for [mem size 0x100000000 64bit pref]
[ 3.315501] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x100000000 64bit pref]
[ 3.324356] pci 0000:00:00.0: BAR 8: assigned [mem 0x30000000-0x300fffff]
[ 3.331854] pci 0000:01:00.0: BAR 0: assigned [mem 0x30000000-0x30000fff 64bit]
[ 3.339934] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 3.345420] pci 0000:00:00.0: bridge window [mem 0x30000000-0x300fffff]
[ 3.353005] pci 0000:00:00.0: enabling device (0000 -> 0002)
[ 3.359249] pci 0000:01:00.0: enabling device (0000 -> 0002)
[ 3.365527] pci 0000:01:00.0: quirk_usb_early_handoff+0x0/0x9e8 took 12237 usecs
[ 3.373942] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 3.379730] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[ 3.388239] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000040000000890
[ 3.398401] pcie_plda 2b000000.pcie: msi#0 address_hi 0x0 address_lo 0x190
[ 3.406485] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 3.412291] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[ 3.420452] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[ 3.428134] hub 1-0:1.0: USB hub found
[ 3.432330] hub 1-0:1.0: 1 port detected
[ 3.437716] hub 2-0:1.0: USB hub found
[ 3.441907] hub 2-0:1.0: 4 ports detected
[ 3.448827] pcie_plda 2c000000.pcie: Failed to get power-gpio, but maybe it's always on.
[ 3.457947] pcie_plda 2c000000.pcie: host bridge /soc/pcie@2C000000 ranges:
[ 3.465688] pcie_plda 2c000000.pcie: MEM 0x0038000000..0x003fffffff -> 0x0038000000
[ 3.474646] pcie_plda 2c000000.pcie: MEM 0x0980000000..0x09bfffffff -> 0x0980000000
[ 3.483625] ATR entry: 0x09c0000000 -> 0x0000000000 [0x0010000000] (param: 0x000001)
[ 3.492189] ATR entry: 0x0038000000 -> 0x0038000000 [0x0008000000] (param: 0x000000)
[ 3.500739] ATR entry: 0x0980000000 -> 0x0980000000 [0x0040000000] (param: 0x000000)
[ 3.661349] usb usb2-port2: over-current condition
[ 3.761327] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[ 3.821354] usb usb2-port4: over-current condition
[ 3.931433] pcie_plda 2c000000.pcie: Port link down, exit.
[ 3.937698] pwm-backlight backlight: supply power not found, using dummy regulator
[ 3.959715] clk-starfive-jh7110-vout 295c0000.clock-controller: starfive JH7110 clk_vout init successfully.
[ 3.962529] hub 1-1:1.0: USB hub found
[ 3.981343] hub 1-1:1.0: 4 ports detected
[ 3.981961] clk-starfive-jh7110-isp 19810000.clock-controller: starfive JH7110 clk_isp init successfully.
[ 3.996959] dw_axi_dmac_platform 16050000.dma-controller: DesignWare AXI DMA Controller, 4 channels
[ 4.008001] printk: console [ttyS0] disabled
[ 4.032959] 10000000.serial: ttyS0 at MMIO 0x10000000 (irq = 17, base_baud = 1500000) is a 16550A
[ 4.042811] printk: console [ttyS0] enabled
[ 4.051619] printk: bootconsole [uart0] disabled
[ 4.061972] jh7110-vin 19800000.vin_sysctl: stfcamss probe enter!
[ 4.070214] jh7110-vin 19800000.vin_sysctl: stfcamss probe success!
[ 4.087929] dwmmc_starfive 16010000.sdio0: IDMAC supports 32-bit address mode.
[ 4.088015] dwmmc_starfive 16020000.sdio1: IDMAC supports 32-bit address mode.
[ 4.095228] dwmmc_starfive 16010000.sdio0: Using internal DMA controller.
[ 4.095236] dwmmc_starfive 16010000.sdio0: Version ID is 290a
[ 4.095331] jh7110-sec 16000000.crypto: will run requests pump with realtime priority
[ 4.097632] jh7110-sec 16000000.crypto: Initialized
[ 4.098383] starfive-i2s 120b0000.i2stx_4ch0: designware: play supported
[ 4.098389] starfive-i2s 120b0000.i2stx_4ch0: designware: i2s master mode supported
[ 4.098639] sf-mipi-dphy-tx 295e0000.mipi-dphy: sf_dphy_probe begin
[ 4.098646] sf-mipi-dphy-tx 295e0000.mipi-dphy: ===> sf_dphy_probe enter, 445
[ 4.098721] sf-mipi-dphy-tx 295e0000.mipi-dphy: control ECO
[ 4.098732] sf-mipi-dphy-tx 295e0000.mipi-dphy: supply mipi_1p8 not found, using dummy regulator
[ 4.098889] sf-mipi-dphy-tx 295e0000.mipi-dphy: sf_dphy_probe end
[ 4.099005] cdns-dsi 295d0000.mipi: dsi_sys_clk = 297000000
[ 4.099143] cdns-dsi 295d0000.mipi: starfive dsi bind end
[ 4.099744] cdns-dsi 295d0000.mipi: hs_rate.980000000, channel = 1
[ 4.102502] dwmmc_starfive 16020000.sdio1: Using internal DMA controller.
[ 4.109290] dwmmc_starfive 16010000.sdio0: DW MMC controller at irq 29,32 bit host data width,32 deep fifo
[ 4.115026] dwmmc_starfive 16020000.sdio1: Version ID is 290a
[ 4.115052] dwmmc_starfive 16020000.sdio1: DW MMC controller at irq 30,32 bit host data width,32 deep fifo
[ 4.123936] mmc_host mmc0: card is non-removable.
[ 4.127845] mmc_host mmc1: card is polling.
[ 4.351317] mmc_host mmc0: Bus speed (slot 0) = 49500000Hz (slot req 400000Hz, actual 399193HZ div = 62)
[ 4.451307] mmc_host mmc1: Bus speed (slot 0) = 49500000Hz (slot req 400000Hz, actual 399193HZ div = 62)
[ 4.649781] sf-mipi-dphy-tx 295e0000.mipi-dphy: GET_AON_GP_REG
[ 4.655633] sf-mipi-dphy-tx 295e0000.mipi-dphy: control ECO
[ 4.661826] sys_m31_dphy_tx_configure opts->mipi_dphy.hs_clk_rate = 980000000
[ 4.668967] sf-mipi-dphy-tx 295e0000.mipi-dphy: request dphy hs_rate 980Mbps
[ 4.676081] sf-mipi-dphy-tx 295e0000.mipi-dphy: MIPI dphy-tx # PLL is not LOCKED
[ 4.683498] sf-mipi-dphy-tx 295e0000.mipi-dphy: want dphy hs_rate 980Mbps
[ 4.690293] sf-mipi-dphy-tx 295e0000.mipi-dphy: config dphy hs_rate 980Mbps
[ 4.697269] sf-mipi-dphy-tx 295e0000.mipi-dphy: MIPI dphy-tx # AON_POWER_READY_N active(0)
[ 4.705561] sf-mipi-dphy-tx 295e0000.mipi-dphy: 1 SET_U0_MIPITX_DPHY_RESETB
[ 4.712537] sf-mipi-dphy-tx 295e0000.mipi-dphy: 2 SET_U0_MIPITX_DPHY_RESETB
[ 4.719504] sf-mipi-dphy-tx 295e0000.mipi-dphy: MIPI dphy-tx # PLL Locked
[ 4.726307] cdns-dsi 295d0000.mipi: START dsi ppi_txbyte_hs
[ 4.731773] mmc_host mmc1: Bus speed (slot 0) = 49500000Hz (slot req 50000000Hz, actual 49500000HZ div = 0)
[ 4.731893] cdns-dsi 295d0000.mipi: sys_mipi_dsi_set_ppi_txbyte_hs
[ 4.734086] starfive_raxda_10inch 2-0020: dsi command return -61, mode 0
[ 4.741712] random: fast init done
[ 4.748253] cdns-dsi 295d0000.mipi: STOP dsi ppi_txbyte_hs
[ 4.754944] mmc1: new high speed SDXC card at address aaaa
[ 4.755346] of_cfs_init
[ 4.755381] of_cfs_init: OK
[ 4.755718] starfive-pwmdac 100b0000.pwmdac: clk_apb0 = 49500000, clk_pwmdac_apb = 49500000, clk_pwmdac_core = 4068493
[ 4.756011] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 4.757963] cdns-dsi 295d0000.mipi: sys_mipi_dsi_set_ppi_txbyte_hs
[ 4.757973] sf-mipi-dphy-tx 295e0000.mipi-dphy: 1 SET_U0_MIPITX_DPHY_RESETB
[ 4.757976] sf-mipi-dphy-tx 295e0000.mipi-dphy: 2 SET_U0_MIPITX_DPHY_RESETB
[ 4.764227] mmcblk1: mmc1:aaaa SR64G 59.5 GiB
[ 4.811330] mmc_host mmc0: Bus speed (slot 0) = 49500000Hz (slot req 300000Hz, actual 298192HZ div = 83)
[ 4.832959] mmcblk1: p1 p2 p3 p4
[ 4.894253] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 4.904863] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 4.905562] starfive soc:display-subsystem: bound 29400000.dc8200 (ops 0xffffffff8107d390)
[ 4.913571] cfg80211: failed to load regulatory.db
[ 4.926648] innohdmi-starfive 29590000.hdmi: inno hdmi bind begin
[ 4.934205] innohdmi-starfive 29590000.hdmi: [drm:inno_hdmi_bind] registered Inno HDMI I2C bus driver success
[ 4.944305] innohdmi-starfive 29590000.hdmi: HDMI&AUDIO register done.
[ 4.950850] innohdmi-starfive 29590000.hdmi: inno hdmi bind end
[ 4.956786] starfive soc:display-subsystem: bound 29590000.hdmi (ops 0xffffffff8107e128)
[ 4.964894] vs-simple-encoder soc:dsi-output: encoder_bind begin
[ 4.970921] no panel, -517
[ 4.973642] vs-simple-encoder soc:dsi-output: encoder_bind error
[ 4.979651] starfive soc:display-subsystem: bound soc:dsi-output (ops 0xffffffff8107dd70)
[ 4.988231] [drm] Initialized starfive 1.0.0 20191101 for soc:display-subsystem on minor 0
[ 5.271325] mmc_host mmc0: Bus speed (slot 0) = 49500000Hz (slot req 200000Hz, actual 199596HZ div = 124)
[ 5.496598] starfive soc:display-subsystem: [drm] Cannot find any crtc or sizes
[ 5.731312] mmc_host mmc0: Bus speed (slot 0) = 49500000Hz (slot req 100000Hz, actual 99798HZ div = 248)
[ 6.004128] starfive soc:display-subsystem: [drm] Cannot find any crtc or sizes
[ 6.511486] starfive soc:display-subsystem: [drm] Cannot find any crtc or sizes
[ 7.531387] ALSA device list:
[ 7.534413] #0: Starfive-PWMDAC-Sound-Card
[ 7.538739] #1: Starfive-HDMI-Sound-Card
[ 7.546988] Freeing unused kernel image (initmem) memory: 2196K
[ 7.553148] Run /init as init process
[ 7.556849] with arguments:
[ 7.556861] /init
[ 7.556871] with environment:
[ 7.556883] HOME=/
[ 7.556893] TERM=linux
[ 7.556904] stmmaceth=chain_mode:1
[ 7.556919] selinux=0
[ 8.113229] starfive-eth-plat 16030000.ethernet end0: renamed from eth0
[ 8.172561] starfive-eth-plat 16040000.ethernet end1: renamed from eth1
[ 8.497283] EXT4-fs (mmcblk1p4): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[ 9.235225] systemd[1]: System time before build time, advancing clock.
[ 9.371390] systemd[1]: systemd 254.3-1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[ 9.403425] systemd[1]: Detected architecture riscv64.
[ 9.465933] systemd[1]: Hostname set to .
[ 10.511869] systemd[1]: Queued start job for default target graphical.target.
[ 10.522036] systemd[1]: Created slice system-getty.slice - Slice /system/getty.
[ 10.564289] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
[ 10.604063] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty.
[ 10.652954] systemd[1]: Created slice user.slice - User and Session Slice.
[ 10.691724] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch.
[ 10.742091] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
[ 10.792298] systemd[1]: proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point was skipped because of an unmet condition check (ConditionPathExists=/proc/sys/fs/binfmt_misc).
[ 10.812659] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes.
[ 10.851600] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
[ 10.892021] systemd[1]: Reached target paths.target - Path Units.
[ 10.931797] systemd[1]: Reached target remote-fs.target - Remote File Systems.
[ 10.971473] systemd[1]: Reached target slices.target - Slice Units.
[ 11.011882] systemd[1]: Reached target swap.target - Swaps.
[ 11.052001] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
[ 11.092492] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
[ 11.132102] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
[ 11.172865] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
[ 11.221645] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
[ 11.262802] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[ 11.304880] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
[ 11.344422] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
[ 11.385808] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
[ 11.432160] systemd[1]: sys-kernel-tracing.mount - Kernel Trace File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/tracing).
[ 11.448968] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
[ 11.459438] systemd[1]: Mounting tmp.mount - Temporary Directory /tmp...
[ 11.509644] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
[ 11.555895] systemd[1]: Starting [email protected] - Load Kernel Module configfs...
[ 11.605364] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
[ 11.645674] systemd[1]: Starting [email protected] - Load Kernel Module drm...
[ 11.676970] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: [email protected]
[ 11.688800] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
[ 11.735402] systemd[1]: Starting [email protected] - Load Kernel Module fuse...
[ 11.773699] systemd[1]: Starting [email protected] - Load Kernel Module loop...
[ 11.818708] systemd[1]: Starting systemd-journald.service - Journal Service...
[ 11.854562] systemd-journald[255]: Collecting audit messages is disabled.
[ 11.864904] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
[ 11.901497] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/StubPcrKernelImage-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f).
[ 11.924947] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
[ 11.973778] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
[ 12.020990] systemd[1]: Started systemd-journald.service - Journal Service.
[ 12.595281] systemd-journald[255]: Received client request to flush runtime journal.
[ 12.758448] systemd-journald[255]: /var/log/journal/63d0213e717a4199956fefea0d153f2f/system.journal: Realtime clock jumped backwards relative to last journal entry, rotating.
[ 12.775040] systemd-journald[255]: Rotating system journal.
[ 14.446222] venc: loading out-of-tree module taints kernel.
[ 14.453556] SUCCESS alloc_chrdev_region
[ 14.453630] vdec 130a0000.vpu_dec: device init.
[ 14.458468] cnm_jpu 13090000.jpu: init device.
[ 14.461999] SUCCESS alloc_chrdev_region
[ 16.391331] random: crng init done
[ 19.424542] starfive-eth-plat 16030000.ethernet end0: PHY [stmmac-0:00] driver [YT8531 Gigabit Ethernet] (irq=POLL)
[ 19.435870] starfive-eth-plat 16030000.ethernet end0: Register MEM_TYPE_PAGE_POOL RxQ-0
[ 19.451320] dwmac4: Master AXI performs fixed burst length
[ 19.456865] starfive-eth-plat 16030000.ethernet end0: No Safety Features support found
[ 19.464847] starfive-eth-plat 16030000.ethernet end0: IEEE 1588-2008 Advanced Timestamp supported
[ 19.474398] starfive-eth-plat 16030000.ethernet end0: configuring for phy/rgmii-id link mode
[ 19.505821] starfive-eth-plat 16040000.ethernet end1: PHY [stmmac-1:00] driver [YT8531 Gigabit Ethernet] (irq=POLL)
[ 19.518028] starfive-eth-plat 16040000.ethernet end1: Register MEM_TYPE_PAGE_POOL RxQ-0
[ 19.527232] dwmac4: Master AXI performs fixed burst length
[ 19.533826] starfive-eth-plat 16040000.ethernet end1: No Safety Features support found
[ 19.543088] starfive-eth-plat 16040000.ethernet end1: IEEE 1588-2008 Advanced Timestamp supported
[ 19.568793] starfive-eth-plat 16040000.ethernet end1: configuring for phy/rgmii-id link mode
[ 22.734359] starfive-eth-plat 16040000.ethernet end1: Link is Up - 1Gbps/Full - flow control off
[ 22.743336] IPv6: ADDRCONF(NETDEV_CHANGE): end1: link becomes ready
[ 67.968601] systemd-journald[255]: /var/log/journal/63d0213e717a4199956fefea0d153f2f/user-1000.journal: Journal file uses a different sequence number ID, rotating.

@samiux
Copy link
Author

samiux commented Sep 17, 2023

user@starfive:/etc/default$ cat u-boot
#/etc/default/u-boot - configuration file for u-boot-update(8)

#U_BOOT_UPDATE="true"

#U_BOOT_ALTERNATIVES="default recovery"
#U_BOOT_DEFAULT="l0"
#U_BOOT_ENTRIES="all"
#U_BOOT_MENU_LABEL="Debian GNU/Linux"
#U_BOOT_PARAMETERS="ro quiet"
#U_BOOT_ROOT=""
#U_BOOT_TIMEOUT="50"
#U_BOOT_FDT=""
#U_BOOT_FDT_DIR="/usr/lib/linux-image-"
#U_BOOT_FDT_OVERLAYS=""
#U_BOOT_FDT_OVERLAYS_DIR="/boot/dtbo/"

U_BOOT_PARAMETERS="root=/dev/mmcblk1p4 rw console=tty0 console=ttyS0,115200 earlycon rootwait stmmaceth=chain_mode:1 selinux=0"
U_BOOT_FDT_DIR="/dtbs/"

@adamierymenko
Copy link

Same here. reboot or systemctl reboot just hangs like a shutdown/halt. Cold boot after power cycle is fine.

@adamierymenko
Copy link

I was able to fix this by installing the watchdog service in Debian, which apparently detects the halt state as a 'crash' and forces a reboot. Seems like a good workaround.

@samiux
Copy link
Author

samiux commented Oct 16, 2023

Nice found. It works. Thank you very much.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
None yet
Projects
None yet
Development

No branches or pull requests

3 participants