aws Cookbook

Overview

This cookbook provides resources for configuring and managing nodes running in Amazon Web Services as well as several AWS service offerings.

Included resources:

CloudFormation Stack Management (cloudformation_stack)
CloudWatch (cloudwatch)
CloudWatch Instance Monitoring (instance_monitoring)
DynamoDB (dynamodb_table)
EBS Volumes (ebs_volume)
EC2 Instance Role (instance_role)
EC2 Instance Termination Protection (instance_term_protection)
Elastic IPs (elastic_ip)
Elastic Load Balancer (elastic_lb)
IAM User, Group, Policy, and Role Management: (iam_user, iam_group, iam_policy, iam_role)
Kinesis Stream Management (kinesis_stream)
Resource Tags (resource_tag)
Route53 DNS Records (route53_record)
Route53 DNS Zones (route53_zone)
S3 Files (s3_file)
S3 Buckets (s3_bucket)
Secondary IPs (secondary_ip)
Security Groups (security_group)
AWS SSM Parameter Store (ssm_parameter_store)
Autoscaling (autoscaling)

Unsupported AWS resources that have other cookbooks include but are not limited to:

aws_security

Important - Security Implications

Please review any and all security implications of using any of these resources. This cookbook presents resources which could easily be poorly implemented, abused or exploited.

They have the ability to perform destructive actions (ex. delete *)
They manage sensitive resources (ex. IAM/SSM)
They require IAM keys which could be compromised

You will want to understand any and all security implications and architect your implementation accordingly before proceeding.

Some recommendations are below:

Do not use IAM credentials of the node - pass a separate set of credentials to these resources
Use IAM to restrict credentials to only the actions required, implementing conditions whenever necessary (follow least privileged principles.)

See iam_restrictions_and_conditions

Follow any and all aws best practices for managing credentials and security
Review your cookbook implementation as cloudformation or alternative tooling may be a better fit for managing aws infrastructure as code.

Maintainers

This cookbook is maintained by the Sous Chefs. The Sous Chefs are a community of Chef cookbook maintainers working together to maintain important cookbooks. If you’d like to know more please visit sous-chefs.org or come chat with us on the Chef Community Slack in #sous-chefs.

Requirements

Platforms

Any platform supported by Chef and the AWS-SDK

Chef

Chef 15.3+

Cookbooks

None

Credentials

In order to manage AWS components, authentication credentials need to be available to the node. There are 3 ways to handle this:

Explicitly set the credentials when using the resources
Use the credentials in the ~/.aws/credentials file
Let the resource pick up credentials from the IAM role assigned to the instance

Also new resources can now assume an STS role, with support for MFA as well. Instructions are below in the relevant section.

Using resource parameters

In order to pass the credentials to the resource, credentials must be available to the node. There are a number of ways to handle this, such as node attributes applied to the node or via Chef roles/environments.

We recommend storing these in an encrypted databag, and loading them in the recipe where the resources are used.

Example Data Bag:

% knife data bag show aws main
{
  "id": "main",
  "aws_access_key_id": "YOUR_ACCESS_KEY",
  "aws_secret_access_key": "YOUR_SECRET_ACCESS_KEY",
  "aws_session_token": "YOUR_SESSION_TOKEN"
}

This can be loaded in a recipe with:

aws = data_bag_item('aws', 'main')

And to access the values:

aws['aws_access_key_id']
aws['aws_secret_access_key']
aws['aws_session_token']

We'll look at specific usage below.

Using local credentials

If credentials are not supplied via parameters, resources will look for the credentials in the ~/.aws/credentials file:

[default]
aws_access_key_id = ACCESS_KEY_ID
aws_secret_access_key = ACCESS_KEY

Note that this also accepts other profiles if they are supplied via the ENV['AWS_PROFILE'] environment variable.

Using IAM instance role

If your instance has an IAM role, then the credentials can be automatically resolved by the cookbook using Amazon instance metadata API.

You can then omit the authentication properties aws_secret_access_key and aws_access_key when using the resource.

Of course, the instance role must have the required policies. Here is a sample policy for EBS volume management:

{
  "Version": "2012-10-17",
  "Statement": [
    {
      "Action": [
        "ec2:AttachVolume",
        "ec2:CreateVolume",
        "ec2:ModifyInstanceAttribute",
        "ec2:ModifyVolumeAttribute",
        "ec2:DescribeVolumeAttribute",
        "ec2:DescribeVolumeStatus",
        "ec2:DescribeVolumes",
        "ec2:DetachVolume",
        "ec2:EnableVolumeIO"
      ],
      "Sid": "Stmt1381536011000",
      "Resource": [
        "*"
      ],
      "Effect": "Allow"
    }
  ]
}

For resource tags:

{
  "Version": "2012-10-17",
  "Statement": [
    {
      "Action": [
        "ec2:CreateTags",
        "ec2:DescribeTags"
      ],
      "Sid": "Stmt1381536708000",
      "Resource": [
        "*"
      ],
      "Effect": "Allow"
    }
  ]
}

Assuming roles via STS and using MFA

The following is an example of how roles can be assumed using MFA. The following can also be used to assumes roles that do not require MFA, just ensure that the MFA arguments (serial_number and token_code) are omitted.

This assumes you have also stored the cfn_role_arn, and mfa_serial attributes as well, but there are plenty of ways these attributes can be supplied (they could be stored locally in the consuming cookbook, for example).

Note that MFA codes cannot be recycled, hence the importance of creating a single STS session and passing that to resources. If multiple roles need to be assumed using MFA, it is probably prudent that these be broken up into different recipes and chef-client runs.

require 'aws-sdk-core'
require 'securerandom'

session_id = SecureRandom.hex(8)
sts = ::Aws::AssumeRoleCredentials.new(
  client: ::Aws::STS::Client.new(
    credentials: ::Aws::Credentials.new(
      node['aws']['aws_access_key_id'],
      node['aws']['aws_secret_access_key']
    ),
    region: 'us-east-1'
  ),
  role_arn: node['aws']['cfn_role_arn'],
  role_session_name: session_id,
  serial_number: node['aws']['mfa_serial'],
  token_code: node['aws']['mfa_code']
)

aws_cloudformation_stack 'kitchen-test-stack' do
  action :create
  template_source 'kitchen-test-stack.tpl'
  aws_access_key sts.access_key_id
  aws_secret_access_key sts.secret_access_key
  aws_session_token sts.session_token
end

When running the cookbook, ensure that an attribute JSON is passed that supplies the MFA code. Example using chef-zero:

echo '{ "aws": { "mfa_code": "123456" } }' > mfa.json && chef-client -z -o 'recipe[aws_test]' -j mfa.json

Running outside of an AWS instance

region can be specified on each resource if the cookbook is being run outside of an AWS instance. This can prevent some kinds of failures that happen when resources try to detect region.

aws_cloudformation_stack 'kitchen-test-stack' do
  action :create
  template_source 'kitchen-test-stack.tpl'
  region 'us-east-1'
end

Resources

aws_cloudformation_stack

Manage CloudFormation stacks.

Actions

create: Creates the stack, or updates it if it already exists.
delete: Begins the deletion process for the stack.

Properties

template_source: Required - the location of the CloudFormation template file. The file should be stored in the files directory in the cookbook.
parameters: An array of parameter_key and parameter_value pairs for parameters in the template. Follow the syntax in the example above.
disable_rollback: Set this to true if you want stack rollback to be disabled if creation of the stack fails. Default: false
stack_policy_body: Optionally define a stack policy to apply to the stack, mainly used in protecting stack resources after they are created. For more information, see Prevent Updates to Stack Resources in the CloudFormation user guide.
iam_capability: Set to true to allow the CloudFormation template to create IAM resources. This is the equivalent of setting CAPABILITY_IAM When using the SDK or CLI. Default: false
named_iam_capability: Set to true to allow the CloudFormation template to create IAM resources with custom names. This is the equivalent of setting CAPABILITY_NAMED_IAM When using the SDK or CLI. Default: false

Examples

aws_cloudformation_stack 'example-stack' do
  region 'us-east-1'
  template_source 'example-stack.tpl'
  parameters ([
    {
      :parameter_key => 'KeyPair',
      :parameter_value => 'user@host'
    },
    {
      :parameter_key => 'SSHAllowIPAddress',
      :parameter_value => '127.0.0.1/32'
    }
  ])
end

aws_cloudwatch

Use this resource to manage CloudWatch alarms.

Actions

create - Create or update CloudWatch alarms.
delete - Delete CloudWatch alarms.
disable_action - Disable action of the CloudWatch alarms.
enable_action - Enable action of the CloudWatch alarms.

Properties

aws_secret_access_key, aws_access_key and optionally aws_session_token - required, unless using IAM roles for authentication.
alarm_name - the alarm name. If none is given on assignment, will take the resource name.
alarm_description - the description of alarm. Can be blank also.
actions_enabled - true for enable action on OK, ALARM or Insufficient data. if true, any of ok_actions, alarm_actions or insufficient_data_actions must be specified.
ok_actions - array of action if alarm state is OK. If specified actions_enabled must be true.
alarm_actions - array of action if alarm state is ALARM. If specified actions_enabled must be true.
insufficient_data_actions - array of action if alarm state is INSUFFICIENT_DATA. If specified actions_enabled must be true.
metric_name - CloudWatch metric name of the alarm. eg - CPUUtilization.Required parameter.
namespace - namespace of the alarm. eg - AWS/EC2, required parameter.
statistic - statistic of the alarm. Value must be in any of SampleCount, Average, Sum, Minimum or Maximum. Required parameter.
extended_statistic - extended_statistic of the alarm. Specify a value between p0.0 and p100. Optional parameter.
dimensions - dimensions for the metric associated with the alarm. Array of name and value.
period - in seconds, over which the specified statistic is applied. Integer type and required parameter.
unit - unit of measure for the statistic. Required parameter.
evaluation_periods - number of periods over which data is compared to the specified threshold. Required parameter.
threshold - value against which the specified statistic is compared. Can be float or integer type. Required parameter.
comparison_operator - arithmetic operation to use when comparing the specified statistic and threshold. The specified statistic value is used as the first operand.

For more information about parameters, see CloudWatch Identifiers in the Using CloudWatch guide.

Examples

aws_cloudwatch "kitchen_test_alarm" do
  period 21600
  evaluation_periods 2
  threshold 50.0
  comparison_operator "LessThanThreshold"
  metric_name "CPUUtilization"
  namespace "AWS/EC2"
  statistic "Maximum"
  dimensions [{"name" : "InstanceId", "value" : "i-xxxxxxx"}]
  action :create
end

aws_dynamodb_table

Use this resource to create and delete DynamoDB tables. This includes the ability to add global secondary indexes to existing tables.

Actions

create: Creates the table. Will update the following if the table exists:
global_secondary_indexes: Will remove non-existent indexes, add new ones, and update throughput for existing ones. All attributes need to be present in attribute_definitions. No effect if the resource is omitted.
stream_specification: Will update as shown. No effect is the resource is omitted.
provisioned_throughput: Will update as shown.
delete: Deletes the index.

Properties

attribute_definitions: Required. Attributes to create for the table. Mainly this is used to specify attributes that are used in keys, as otherwise one can add any attribute they want to a DynamoDB table.
key_schema: Required. Used to create the primary key for the table. Attributes need to be present in attribute_definitions.
local_secondary_indexes: Used to create any local secondary indexes for the table. Attributes need to be present in attribute_definitions.
global_secondary_indexes: Used to create any global secondary indexes. Can be done to an existing table. Attributes need to be present in
attribute_definitions.
provisioned_throughput: Define the throughput for this table.
stream_specification: Specify if there should be a stream for this table.

Several of the attributes shown here take parameters as shown in the AWS Ruby SDK Documentation. Also, the AWS DynamoDB Documentation may be of further help as well.

Examples

aws_dynamodb_table 'example-table' do
  action :create
  attribute_definitions [
    { attribute_name: 'Id', attribute_type: 'N' },
    { attribute_name: 'Foo', attribute_type: 'N' },
    { attribute_name: 'Bar', attribute_type: 'N' },
    { attribute_name: 'Baz', attribute_type: 'S' }
  ]
  key_schema [
    { attribute_name: 'Id', key_type: 'HASH' },
    { attribute_name: 'Foo', key_type: 'RANGE' }
  ]
  local_secondary_indexes [
    {
      index_name: 'BarIndex',
      key_schema: [
        {
          attribute_name: 'Id',
          key_type: 'HASH'
        },
        {
          attribute_name: 'Bar',
          key_type: 'RANGE'
        }
      ],
      projection: {
        projection_type: 'ALL'
      }
    }
  ]
  global_secondary_indexes [
    {
      index_name: 'BazIndex',
      key_schema: [{
        attribute_name: 'Baz',
        key_type: 'HASH'
      }],
      projection: {
        projection_type: 'ALL'
      },
      provisioned_throughput: {
        read_capacity_units: 1,
        write_capacity_units: 1
      }
    }
  ]
  provisioned_throughput ({
    read_capacity_units: 1,
    write_capacity_units: 1
  })
  stream_specification ({
    stream_enabled: true,
    stream_view_type: 'KEYS_ONLY'
  })
end

aws_ebs_volume

The resource only handles manipulating the EBS volume, additional resources need to be created in the recipe to manage the attached volume as a filesystem or logical volume.

Actions

create - create a new volume.
attach - attach the specified volume.
detach - detach the specified volume.
delete - delete the specified volume.
snapshot - create a snapshot of the volume.
prune - prune snapshots.

Properties

aws_secret_access_key, aws_access_key and optionally aws_session_token - required, unless using IAM roles for authentication.
size - size of the volume in gigabytes.
snapshot_id - snapshot to build EBS volume from.
most_recent_snapshot - use the most recent snapshot when creating a volume from an existing volume (defaults to false)
availability_zone - EC2 region, and is normally automatically detected.
device - local block device to attach the volume to, e.g. /dev/sdi but no default value, required.
volume_id - specify an ID to attach, cannot be used with action :create because AWS assigns new volume IDs
timeout - connection timeout for EC2 API.
snapshots_to_keep - used with action :prune for number of snapshots to maintain.
description - used to set the description of an EBS snapshot
volume_type - "standard", "io1", "io2", "gp2" or "gp3" ("standard" is magnetic, "io1" and "io2" are provisioned SSD, "gp2" and "gp3" are general purpose SSD)
piops - number of Provisioned IOPS to provision, must be >= 100, or between 3000 and 16000 for the "gp3" volume type
throughput - amount of throughput in MB/s for "gp3" volume types, must be between 125 and 1000 if specified
existing_raid - whether or not to assume the raid was previously assembled on existing volumes (default no)
encrypted - specify if the EBS should be encrypted
kms_key_id - the full ARN of the AWS Key Management Service (AWS KMS) master key to use when creating the encrypted volume (defaults to master key if not specified)
delete_on_termination - Boolean value to control whether or not the volume should be deleted when the instance it's attached to is terminated (defaults to nil). Only applies to :attach action.
tags - Hash value to tag the new volumes or snapshots. Only applies to :create and :snapshot actions.

Examples

Create a 50G volume, attach it to the instance as /dev/sdi:

aws_ebs_volume 'db_ebs_volume' do
  size 50
  device '/dev/sdi'
  action [:create, :attach]
end

Create a new 50G volume from the snapshot ID provided and attach it as /dev/sdi.

aws_ebs_volume 'db_ebs_volume_from_snapshot' do
  size 50
  device '/dev/sdi'
  snapshot_id 'snap-ABCDEFGH'
  action [:create, :attach]
end

aws_elastic_ip

The elastic_ip resource provider does not support allocating new IPs. This must be done before running a recipe that uses the resource. After allocating a new Elastic IP, we recommend storing it in a databag and loading the item in the recipe.

Actions

associate - Associate an allocated IP to the node
disassociate - Disassociate an allocated IP from the node

Properties

aws_secret_access_key, aws_access_key and optionally aws_session_token - required, unless using IAM roles for authentication.
ip: String. The IP address to associate or disassociate.
timeout: Integer. Default: 180. Time in seconds to wait. 0 for unlimited.

Examples

aws_elastic_ip '34.15.30.10' do
  action :associate
end

aws_elastic_ip 'Server public IP' do
  ip '34.15.30.11'
  action :associate
end

aws_elastic_lb

elastic_lb handles registering and removing nodes from ELBs. The resource also adds basic support for creating and deleting ELBs. Note that currently this resource is not fully idempotent so it will not update the existing configuration of an ELB.

Actions

register - Add a node to the ELB
deregister - Remove a node from the ELB
create - Create a new ELB
delete - Delete an existing ELB

Properties

aws_secret_access_key, aws_access_key and optionally aws_session_token - required, unless using IAM roles for authentication.
name - the name of the ELB, required.
region, The region of the ELB. Defaults to the region of the node.
listeners, Array or hashes. The ports/protocols the ELB will listen on. See the example for a sample.
security_groups, Array. Security groups to apply to the ELB. Only needed when creating ELBs.
subnets, Array. The subnets the ELB will listen in. Only needed when creating ELBs and when using VPCs.
availability_zones: Array. The availability zones the ELB will listen in. Only needed when creating ELBs and when using classic networking.
tags: Array.
scheme: Array.

Examples

ELB running in classic networking listening on port 80.

aws_elastic_lb 'Setup the ELB' do
  name 'example-elb'
  action :create
  availability_zones ['us-west-2a']
  listeners [
    {
      instance_port: 80,
      instance_protocol: 'HTTP',
      load_balancer_port: 80,
      protocol: 'HTTP',
    },
  ]
end

To register the node in the 'QA' ELB:

aws_elastic_lb 'elb_qa' do
  name 'QA'
  action :register
end

aws_iam_user

Use this resource to manage IAM users.

Actions

create: Creates the user. No effect if the user already exists.
delete: Gracefully deletes the user (detaches from all attached entities, and deletes the user).

Properties

The IAM user takes the name of the resource. A path can be specified as well. For more information about paths, see IAM Identifiers in the Using IAM guide.

Examples

aws_iam_user 'example-user' do
  action :create
  path '/'
end

aws_iam_group

Use this resource to manage IAM groups. The group takes the name of the resource.

Actions

create: Creates the group, and updates members and attached policies if the group already exists.
delete: Gracefully deletes the group (detaches from all attached entities, and deletes the group).

Properties

path: A path can be supplied for the group. For information on paths, see IAM Identifiers in the Using IAM guide.
members: An array of IAM users that are a member of this group.
remove_members: Set to false to ensure that members are not removed from the group when they are not present in the defined resource. Default: true
policy_members: An array of ARNs of IAM managed policies to attach to this resource. Accepts both user-defined and AWS-defined policy ARNs.
remove_policy_members: Set to false to ensure that policies are not detached from the group when they are not present in the defined resource. Default: true

Examples

aws_iam_group 'example-group' do
  action :create
  path '/'
  members [
    'example-user'
  ]
  remove_members true
  policy_members [
    'arn:aws:iam::123456789012:policy/example-policy'
  ]
  remove_policy_members true
end

aws_iam_policy

Use this resource to create an IAM policy. The policy takes the name of the resource.

Actions

create: Creates or updates the policy.
delete: Gracefully deletes the policy (detaches from all attached entities, deletes all non-default policy versions, then deletes the policy).

Properties

path: A path can be supplied for the group. For information on paths, see IAM Identifiers in the Using IAM guide.
policy_document: The JSON document for the policy.
account_id: The AWS account ID that the policy is going in. Required if using non-user credentials (ie: IAM role through STS or instance role).

Examples

aws_iam_policy 'example-policy' do
  action :create
  path '/'
  account_id '123456789012'
  policy_document <<-EOH.gsub(/^ {4}/, '')
    {
        "Version": "2012-10-17",
        "Statement": [
            {
                "Sid": "Stmt1234567890",
                "Effect": "Allow",
                "Action": [
                    "sts:AssumeRole"
                ],
                "Resource": [
                    "arn:aws:iam::123456789012:role/example-role"
                ]
            }
        ]
    }
  EOH
end

aws_iam_role

Use this resource to create an IAM role. The policy takes the name of the resource.

Actions

create: Creates the role if it does not exist. If the role exists, updates attached policies and the assume_role_policy_document.
delete: Gracefully deletes the role (detaches from all attached entities, and deletes the role).

Properties

path: A path can be supplied for the group. For information on paths, see IAM Identifiers in the Using IAM guide.
policy_members: An array of ARNs of IAM managed policies to attach to this resource. Accepts both user-defined and AWS-defined policy ARNs.
remove_policy_members: Set to false to ensure that policies are not detached from the group when they are not present in the defined resource. Default: true
assume_role_policy_document: The JSON policy document to apply to this role for trust relationships. Dictates what entities can assume this role.

Examples

aws_iam_role 'example-role' do
  action :create
  path '/'
  policy_members [
    'arn:aws:iam::123456789012:policy/example-policy'
  ]
  remove_policy_members true
  assume_role_policy_document <<-EOH.gsub(/^ {4}/, '')
    {
      "Version": "2012-10-17",
      "Statement": [
        {
          "Sid": "",
          "Effect": "Deny",
          "Principal": {
            "AWS": "*"
          },
          "Action": "sts:AssumeRole"
        }
      ]
    }
  EOH
end

aws_instance_monitoring

Allows detailed CloudWatch monitoring to be enabled for the current instance.

Actions

enable - Enable detailed CloudWatch monitoring for this instance (Default).
disable - Disable detailed CloudWatch monitoring for this instance.

Properties

aws_secret_access_key, aws_access_key and optionally aws_session_token - required, unless using IAM roles for authentication.
region - The AWS region containing the instance. Default: The current region of the node when running in AWS or us-east-1 if the node is not in AWS.

Examples

aws_instance_monitoring "enable detailed monitoring"

aws_instance_role

Used to associate an IAM role (by way of an IAM instance profile) with an instance. Replaces the instance's current role association if one already exists.

Actions

associate - Associate role with the instance (Default).

Properties

aws_secret_access_key, aws_access_key and optionally aws_session_token - required, unless using IAM roles for authentication.
region - The AWS region containing the instance. Default: The current region of the node when running in AWS or us-east-1 if the node is not in AWS.
instance_id - The id of the instance to modify. Default: The current instance.
profile_arn - The IAM instance profile to associate with the instance

Requirements

IAM permisions:

ec2:DescribeIamInstanceProfileAssociations
ec2:AssociateIamInstanceProfile
- Only needed if the instance is not already associated with an IAM role
ec2:ReplaceIamInstanceProfileAssociation
- Only needed if the instance is already associated with an IAM role
iam:PassRole
- This can be restricted to the resource of the IAM role being associated

Examples

aws_instance_role "change to example role" do
  profile_arn 'arn:aws:iam::123456789012:instance-profile/ExampleInstanceProfile'
end

aws_instance_term_protection

Allows termination protection (AKA DisableApiTermination) to be enabled for an instance.

Actions

enable - Enable termination protection for this instance (Default).
disable - Disable termination protection for this instance.

Properties

aws_secret_access_key, aws_access_key and optionally aws_session_token - required, unless using IAM roles for authentication.
region - The AWS region containing the instance. Default: The current region of the node when running in AWS or us-east-1 if the node is not in AWS.
instance_id - The id of the instance to modify. Default: The current instance.

Examples

aws_instance_term_protection "enable termination protection"

aws_kinesis_stream

Use this resource to create and delete Kinesis streams. Note that this resource cannot be used to modify the shard count as shard splitting is a somewhat complex operation (for example, even CloudFormation replaces streams upon update).

Actions

create: Creates the stream. No effect if the stream already exists.
delete: Deletes the stream.

Properties

starting_shard_count: The number of shards the stream starts with

Examples

aws_kinesis_stream 'example-stream' do
 action :create
 starting_shard_count 1
end

aws_resource_tag

resource_tag can be used to manipulate the tags assigned to one or more AWS resources, i.e. ec2 instances, EBS volumes or EBS volume snapshots.

Actions

add - Add tags to a resource.
update - Add or modify existing tags on a resource -- this is the default action.
remove - Remove tags from a resource, but only if the specified values match the existing ones.
force_remove - Remove tags from a resource, regardless of their values.

Properties

aws_secret_access_key, aws_access_key and optionally aws_session_token - required, unless using IAM roles for authentication.
tags - a hash of key value pairs to be used as resource tags, (e.g. { "Name" => "foo", "Environment" => node.chef_environment },) required.
resource_id - resources whose tags will be modified. The value may be a single ID as a string or multiple IDs in an array. If no resource_id is specified the name attribute will be used.

Examples

Assigning tags to a node to reflect its role and environment:

aws_resource_tag node['ec2']['instance_id'] do
  tags('Name' => 'www.example.com app server',
       'Environment' => node.chef_environment)
  action :update
end

Assigning a set of tags to multiple resources, e.g. ebs volumes in a disk set:

aws_resource_tag 'my awesome raid set' do
  resource_id ['vol-d0518cb2', 'vol-fad31a9a', 'vol-fb106a9f', 'vol-74ed3b14']
  tags('Name' => 'My awesome RAID disk set',
       'Environment' => node.chef_environment)
end

aws_resource_tag 'db_ebs_volume' do
  resource_id lazy { node['aws']['ebs_volume']['db_ebs_volume']['volume_id'] }
  tags ({ 'Service' => 'Frontend' })
end

aws_route53_record

Actions

create - Create a Route53 record
delete - Remove a Route53 record

Properties

aws_secret_access_key, aws_access_key and optionally aws_session_token - required, unless using IAM roles for authentication.
name Required. String. - name of the domain or subdomain.
record_name Optional. String. - name of the domain or subdomain overrides the name. Useful property to use when the resource was called with the same name and different values, like in Split view DNS structure.
value String Array - value appropriate to the type.. for type 'A' value would be an IP address in IPv4 format for example.
type Required. String DNS record type
ttl Integer default: 3600 - time to live, the amount of time in seconds to cache information about the record
weight Optional. String. - a value that determines the proportion of DNS queries that will use this record for the response. Valid options are between 0-255. NOT CURRENTLY IMPLEMENTED
set_identifier Optional . String. - a value that uniquely identifies record in the group of weighted record sets
geo_location String.
geo_location_country String
geo_location_continent String
geo_location_subdivision String
zone_id String
region String
overwrite [true, false] default: true
alias_target Optional. Hash. - Associated with Amazon 'alias' type records. The hash contents varies depending on the type of target the alias points to.
mock [true, false] default: false
fail_on_error [true, false] default: false

Examples

Create a simple record

route53_record "create a record" do
  name  "test"
  value "16.8.4.2"
  type  "A"
  weight "1"
  set_identifier "my-instance-id"
  zone_id "ID VALUE"
  overwrite true
  fail_on_error false
  action :create
end

Delete an existing record. Note that value is still necessary even though we're deleting. This is a limitation in the AWS SDK.

aws_route53_record "delete a record" do
  name  "test"
  value "16.8.4.2"
  type 'A'
  value '123'
  action :delete
end

aws_route53_zone

Actions

create - Create a Route53 zone
delete - Remove a Route53 zone

Properties

aws_secret_access_key, aws_access_key and optionally aws_session_token - required, unless using IAM roles for authentication.
name Required. String. - name of the zone.
description String. - Description shown in the Route53 UI
private [true, false]. default: false - Should this be a private zone for use in your VPCs or a Public zone
vpc_id String. If creating a Private zone this is the VPC to associate the zone with.

Examples

aws_route53_zone 'testkitchen.dmz' do
  description 'My super important zone'
  action :create
end

aws_secondary_ip.rb

This feature is available only to instances within VPCs. It allows you to assign multiple private IP addresses to a network interface.

Actions

assign - Assign a private IP to the instance.
unassign - Unassign a private IP from the instance.

Properties

aws_secret_access_key, aws_access_key and optionally aws_session_token - required, unless using IAM roles for authentication.
ip - the private IP address. - required.
interface - the network interface to assign the IP to. If none is given, uses the default interface.
timeout - connection timeout for EC2 API.

aws_s3_file

s3_file can be used to download a file from s3 that requires aws authorization. This is a wrapper around the core chef remote_file resource and supports the same resource attributes as remote_file. See [remote_file Chef Docs] (https://docs.chef.io/resource_remote_file.html) for a complete list of available attributes.

Properties

aws_secret_access_key, aws_access_key and optionally aws_session_token - required, unless using IAM roles for authentication.
region - The AWS region containing the file. Default: The current region of the node when running in AWS or us-east-1 if the node is not in AWS.
virtual_host - set to true will use bucket name as a virtual host (defaults to false). See.

Actions

create: Downloads a file from s3
create_if_missing: Downloads a file from S3 only if it doesn't exist locally
delete: Deletes a local file
touch: Touches a local file

Examples

aws_s3_file '/tmp/foo' do
  bucket 'i_haz_an_s3_buckit'
  remote_path 'path/in/s3/bukket/to/foo'
  region 'us-west-1'
end

aws_s3_file '/tmp/bar' do
  bucket 'i_haz_another_s3_buckit'
  remote_path 'path/in/s3/buckit/to/foo'
  region 'us-east-1'
  requester_pays true
end

aws_s3_bucket

s3_bucket can be used to create or delete S3 buckets. Note that buckets can only be deleted if they are empty unless you specify delete_all_objects true, which will delete EVERYTHING in your bucket first.

Actions

create: Creates the bucket
delete: Deletes the bucket

Properties

aws_secret_access_key, aws_access_key and optionally aws_session_token - required, unless using IAM roles for authentication.
region - The AWS region containing the bucket. Default: The current region of the node when running in AWS or us-east-1 if the node is not in AWS.
versioning - Enable or disable S3 bucket versioning. Default: false
delete_all_objects - Used with the :delete action to delete all objects before deleting a bucket. Use with EXTREME CAUTION. default: false (for a reason)

Examples

aws_s3_bucket 'some-unique-name' do
  aws_access_key aws['aws_access_key_id']
  aws_secret_access_key aws['aws_secret_access_key']
  versioning true
  region 'us-west-1'
  action :create
end

aws_s3_bucket 'another-unique-name' do
  aws_access_key aws['aws_access_key_id']
  aws_secret_access_key aws['aws_secret_access_key']
  region 'us-west-1'
  action :delete
end

aws_secondary_ip

The secondary_ip resource provider allows one to assign/un-assign multiple private secondary IPs on an instance within a VPC. The number of secondary IP addresses that you can assign to an instance varies by instance type. If no ip address is provided on assign, a random one from within the subnet will be assigned. If no interface is provided, the default interface as determined by Ohai will be used.

Examples

aws_secondary_ip 'assign_additional_ip' do
  aws_access_key aws['aws_access_key_id']
  aws_secret_access_key aws['aws_secret_access_key']
  ip ip_info['private_ip']
  interface 'eth0'
  action :assign
end

aws_security_group

security_group can be used to create or update security groups and associated rules.

Actions

create: Creates the security group

Properties

aws_secret_access_key, aws_access_key and optionally aws_session_token - required, unless using IAM roles for authentication.
region - The AWS region containing the group. Default: The current region of the node when running in AWS or us-east-1 if the node is not in AWS.
name - The name of the security group to manage
description - The security group description
vpc_id - The vpc_id where the security group should be created

Ingress/Egress rules

Note - this manages ALL rules on the security group. Any exist rules not included in these definitions will be removed.

ip_permissions - Ingress rules. Default: []
ip_permissions_egress - Egress rules. Default []

Examples

aws_security_group 'some-unique-name' do
  aws_access_key aws['aws_access_key_id']
  aws_secret_access_key aws['aws_secret_access_key']
  description 'some-unique-description'
  vpc_id 'vpc-000000000'
  ip_permissions []
  ip_permissions_egress []
  tags []
  action :create
end

Manages tags

aws_security_group 'some-unique-name' do
  aws_access_key aws['aws_access_key_id']
  aws_secret_access_key aws['aws_secret_access_key']
  description 'some-unique-description'
  vpc_id 'vpc-000000000'
  ip_permissions []
  ip_permissions_egress []
  tags [{ key: 'tag_key', value: 'tag_value' }]
  action :create
end

Manages ingress/egress rules

aws_security_group 'some-unique-name' do
  aws_access_key aws['aws_access_key_id']
  aws_secret_access_key aws['aws_secret_access_key']
  description 'some-unique-description'
  vpc_id 'vpc-000000000'
  ip_permissions [{
                   from_port: 22,
                   ip_protocol: 'tcp',
                   ip_ranges: [
                     {
                       cidr_ip: '10.10.10.10/24',
                       description: 'SSH access from the office',
                     },
                   ],
                   to_port: 22,
                  }]
  ip_permissions_egress [{
                   from_port: 123,
                   ip_protocol: 'udp',
                   ip_ranges: [
                     {
                       cidr_ip: '10.10.10.10/24',
                       description: 'ntp from the office',
                     },
                   ],
                   to_port: 123,
                        }]
  action :create
end

Alternatively you can use the class definitions for a more strongly typed object

aws_security_group 'some-unique-name' do
  aws_access_key aws['aws_access_key_id']
  aws_secret_access_key aws['aws_secret_access_key']
  description 'some-unique-description'
  vpc_id 'vpc-000000000'
  ip_permissions [Aws::EC2::Types::IpPermission.new.to_h]
  ip_permissions_egress [Aws::EC2::Types::IpPermission.new.to_h]
  action :create
end

aws_ssm_parameter_store

The ssm_parameter_store resource provider allows one to get, create and delete keys and values in the AWS Systems Manager Parameter Store. Values can be stored as plain text or as an encrypted string. In order to use the paramater store resource your ec2 instance role must have the proper policy. This sample policy allows get, creating and deleting parameters. You can adjust the policy to your needs. It is recommended that you have one role with the ability to create secrets and another that can only read the secrets. It is important to set sensitive true in the resources where the secrets are used so that secrets are not exposed in log files.

{
    "Version": "2012-10-17",
    "Statement": [
        {
            "Sid": "VisualEditor0",
            "Effect": "Allow",
            "Action": [
                "ssm:PutParameter",
                "ssm:DeleteParameter",
                "ssm:RemoveTagsFromResource",
                "ssm:GetParameterHistory",
                "ssm:AddTagsToResource",
                "ssm:GetParametersByPath",
                "ssm:GetParameters",
                "ssm:GetParameter",
                "ssm:DeleteParameters"
            ],
            "Resource": [
                "arn:aws:ssm:*:*:document/*",
                "arn:aws:ssm:*:*:parameter/*"
            ]
        },
        {
            "Sid": "VisualEditor1",
            "Effect": "Allow",
            "Action": "ssm:DescribeParameters",
            "Resource": "*"
        }
    ]
}

Actions

get - Retrieve a key/value from the AWS Systems Manager Parameter Store.
get_parameters - Retrieve multiple key/values by name from the AWS Systems Manager Parameter Store. Values are stored in a hash indexed by the corresponding path value.
get_parameters_by_path - Retrieve multiple key/values by path from the AWS Systems Manager Parameter Store. Values are stored in a hash indexed by the key's name. If recursive is set to true, it will retrieve all parameters in the path hierarchy, constructing a representative hash structure with nested keys/values.
create - Create a key/value in the AWS Systems Manager Parameter Store.
delete - Remove the key/value from the AWS Systems Manager Parameter Store.

Properties

aws_secret_access_key, aws_access_key and optionally aws_session_token - required, unless using IAM roles for authentication.
path - Specify the target parameter (String) or parameters (Array - :get_parameters). (required)
recursive - If set to true the code will retrieve all parameters in the hierarchy (get_parameters_by_path, optional defaults to false)
description - Type a description to help identify parameters and their intended use. (create, optional)
value - Item stored in AWS Systems Manager Parameter Store (create, required)
type - Describes the value that is stored. Can be a String, StringList or SecureString (create, required)
key_id - The value after key/ in the ARN of the KSM key which is used with a SecureString. If SecureString is chosen and no key_id is specified AWS Systems Manager Parameter Store uses the default AWS KMS key assigned to your AWS account (create, optional)
overwrite - Indicates if create should overwrite an existing parameters with a new value. AWS Systems Manager Parameter Store versions new values (create, optional defaults to true)
with_decryption - Indicates if AWS Systems Manager Parameter Store should decrypt the value. Note that it must have access to the encryption key for this to succeed (get, optional, defaults to false)
allowed_pattern - A regular expression used to validate the parameter value (create, optional)
return_key - The key name to set the returned value into. This can then be used by calling node.run_state['returnkeyname'] in other resources (get, optional)

Examples

Create String Parameter

aws_ssm_parameter_store 'create testkitchen record' do
  path 'testkitchen'
  description 'testkitchen'
  value 'testkitchen'
  type 'String'
  action :create
  aws_access_key node['aws_test']['key_id']
  aws_secret_access_key node['aws_test']['access_key']
end

Create Encrypted String Parameter with Custom KMS Key

aws_ssm_parameter_store "create encrypted test kitchen record" do
  path '/testkitchen/EncryptedStringCustomKey'
  description 'Test Kitchen Encrypted Parameter - Custom'
  value 'Encrypted Test Kitchen Custom'
  type 'SecureString'
  key_id '5d888999-5fca-3c71-9929-014a529236e1'
  action :create
  aws_access_key node['aws_test']['key_id']
  aws_secret_access_key node['aws_test']['access_key']
 end

Delete Parameter

aws_ssm_parameter_store 'delete testkitchen record' do
  path 'testkitchen'
  aws_access_key node['aws_test']['key_id']
  aws_secret_access_key node['aws_test']['access_key']
  action :delete
end

Get Parameters and Populate Template

aws_ssm_parameter_store 'get clear_value' do
  path '/testkitchen/ClearTextString'
  return_key 'clear_value'
  action :get
  aws_access_key node['aws_test']['key_id']
  aws_secret_access_key node['aws_test']['access_key']
end

aws_ssm_parameter_store 'get decrypted_value' do
  path '/testkitchen/EncryptedStringDefaultKey'
  return_key 'decrypted_value'
  with_decryption true
  action :get
  aws_access_key node['aws_test']['key_id']
  aws_secret_access_key node['aws_test']['access_key']
end

aws_ssm_parameter_store 'get decrypted_custom_value' do
  path '/testkitchen/EncryptedStringCustomKey'
  return_key 'decrypted_custom_value'
  with_decryption true
  action :get
  aws_access_key node['aws_test']['key_id']
  aws_secret_access_key node['aws_test']['access_key']
end

aws_ssm_parameter_store 'getParameters' do
  path ['/testkitchen/ClearTextString', '/testkitchen']
  return_key 'parameter_values'
  action :get_parameters
  aws_access_key node['aws_test']['key_id']
  aws_secret_access_key node['aws_test']['access_key']
end

aws_ssm_parameter_store 'getParametersbypath' do
  path '/pathtest/'
  recursive true
  with_decryption true
  return_key 'path_values'
  action :get_parameters_by_path
  aws_access_key node['aws_test']['key_id']
  aws_secret_access_key node['aws_test']['access_key']
end

Get bucket name and retrieve file

aws_ssm_parameter_store 'get bucketname' do
  path 'bucketname'
  return_key 'bucketname'
  action :get
  aws_access_key node['aws_test']['key_id']
  aws_secret_access_key node['aws_test']['access_key']
end

aws_s3_file "/tmp/test.txt" do
  bucket lazy {node.run_state['bucketname']}
  remote_path "test.txt"
  sensitive true
  aws_access_key_id node[:custom_access_key]
  aws_secret_access_key node[:custom_secret_key]
end

aws_autoscale

autoscale can be used to attach and detach EC2 instances to/from an AutoScaling Group (ASG). Once the instance is attached autoscale allows one to move the instance into and out of standby mode. Standby mode temporarily takes the instance out of rotation so that maintenance can be performed.

Properties

aws_secret_access_key, aws_access_key and optionally aws_session_token - required, unless using IAM roles for authentication.
asg_name - The instance will be attached to this AutoScaling Group. The name is case sensitive. (attach_instance, required)
'should_decrement_desired_capacity' - Indicates whether the Auto Scaling group decrements the desired capacity value by the number of instances moved to standby or detached. (enter_standby and detach_instance, optional, defaults to true)

Actions

attach_instance: Attach an instance to an ASG. If the instance is already attached it will generate an error.
detach_instance: Detach an instance from an ASG. If the instance is not already attached and in service it will generate an error.
enter_standby: Put ths instance into standby mode. Will generate an error if already in standby mode
exit_standby: Remove the instance from standby mode. Will generate an error if not in standby mode

Examples

aws_autoscaling 'attach_instance' do
  action :attach_instance
  asg_name 'Test'
end

aws_autoscaling 'enter_standby' do
  should_decrement_desired_capacity true
  action :enter_standby
end

 aws_autoscaling 'exit_standby' do
   action :exit_standby
 end

aws_autoscaling 'detach_instance' do
  should_decrement_desired_capacity true
  action :detach_instance
end

Contributors

This project exists thanks to all the people who contribute.

Backers

Thank you to all our backers!

Files

README.md

Latest commit

History

README.md

File metadata and controls

aws Cookbook

Overview

Important - Security Implications

Maintainers

Requirements

Platforms

Chef

Cookbooks

Credentials

Using resource parameters

Using local credentials

Using IAM instance role

Assuming roles via STS and using MFA

Running outside of an AWS instance

Resources

aws_cloudformation_stack

Actions

Properties

Examples

aws_cloudwatch

Actions

Properties

Examples

aws_dynamodb_table

Actions

Properties

Examples

aws_ebs_volume

Actions

Properties

Examples

aws_elastic_ip

Actions

Properties

Examples

aws_elastic_lb

Actions

Properties

Examples

aws_iam_user

Actions

Properties

Examples

aws_iam_group

Actions

Properties

Examples

aws_iam_policy

Actions

Properties

Examples

aws_iam_role

Actions

Properties

Examples

aws_instance_monitoring

Actions

Properties

Examples

aws_instance_role

Actions

Properties

Requirements

Examples

aws_instance_term_protection

Actions

Properties

Examples

aws_kinesis_stream

Actions

Properties

Examples

aws_resource_tag

Actions