We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Need to figure out hardware to interface with a generic weather station:
https://www.argentdata.com/catalog/product_info.php?products_id=145 https://www.argentdata.com/files/80422_datasheet.pdf
The rain guage and anemometer have momentary switches that need to be read.
The wind vane has a resistor network that outputs a voltage, so we'll need a A/D input.
Should also add a temp, humidity, and barometric pressure sensor.
Sensors are attached to cables with RJ11 connectors on them.
Seems we'll need some type of enclosure for electronics that will have:
The text was updated successfully, but these errors were encountered:
No branches or pull requests
Need to figure out hardware to interface with a generic weather station:
https://www.argentdata.com/catalog/product_info.php?products_id=145
https://www.argentdata.com/files/80422_datasheet.pdf
The rain guage and anemometer have momentary switches that need to be read.
The wind vane has a resistor network that outputs a voltage, so we'll need a A/D input.
Should also add a temp, humidity, and barometric pressure sensor.
Sensors are attached to cables with RJ11 connectors on them.
Seems we'll need some type of enclosure for electronics that will have:
The text was updated successfully, but these errors were encountered: