Skip to content

Latest commit

 

History

History
41 lines (30 loc) · 3.4 KB

Audio.md

File metadata and controls

41 lines (30 loc) · 3.4 KB
Raw

sound Audio

Unless you disable audio forwarding, you can start and stop it from the system tray at any time.

The client and server will negotiate which codec to use. The most widely tested and supported codecs are opus, vorbis, flac and mp3.

Unlike screen updates which are sent as discrete events, audio compression processes the operating system's audio stream and so this is a continuous process which will take up a little bit of CPU and bandwidth.

If you want to turn off speaker forwarding, use the option speaker=off in your system wide xpra.conf (to disable it globally) or in the per-user configuration file, or on the command line

Screenshots

  • Audio information displayed on session info (with speaker enabled and running and microphone disabled): session-info-audio screenshot

  • A Linux client's pavucontrol showing the Xpra application connected to the local pulseaudio server: pavucontrol-client screenshot

  • pavucontrol running within the xpra session ("on the server"), showing xpra recording the session's audio: pavucontrol-server screenshot

Options

Main options

The main controls can be specified in the configuration file or on the command line, and they are documented in the manual:

  • speaker=on|off|disabled / microphone=on|off|disabled: audio input and output forwarding control: on will start the forwarding as soon as the connection is established, off will require the user to enable it via the menu, disabled will prevent it from being used and the menu entry will be disabled
  • speaker-codec=CODEC / microphone-codec=CODEC: Specify the codec(s) to use for audio output (speaker) or input (microphone). This parameter can be specified multiple times and the order in which the codecs are specified defines the preferred cod ec order. Use the special value ’help’ to get a list of options. When unspecified, all the available codecs are allowed and the first one is used.
  • sound-source=PLUGIN[:OPTIONS]: Specifies the GStreamer sound plugin used for capturing the sound stream. This affects "speaker forwarding" on the server, and "microphone" forwarding on the client. To get a list of options use the special value h elp. It is also possible to specify plugin options using the form "--sound-source=SOURCE:name1=value1,name2=value2,etc", ie: "--sound-source=pulse:device=device.alsa_input.pci-0000_00_14.2.analog-stereo"
Advanced options

Other options are only available through environment variables for fine tuning - which should rarely be needed:

  • XPRA_PULSEAUDIO_DEVICE_NAME to use a specific device if there is more than one device to choose from (can happen when using an existing pulseaudio server with more than one output device attached)
  • XPRA_SOUND_QUEUE_TIME can be used to control the default amount of buffering by the receiver
  • XPRA_SOUND_GRACE_PERIOD (defaults to 2000, in milliseconds) errors will be ignored during this grace period after starting audio forwarding, to allow the audio forwarding buffer to settle down
  • XPRA_SOUND_SINK: the default sink to use (normally auto-detected)