Skip to content

Latest commit

 

History

History
541 lines (398 loc) · 19 KB

README.md

File metadata and controls

541 lines (398 loc) · 19 KB

Chamber

Chamber is a tool for managing secrets. Currently it does so by storing secrets in SSM Parameter Store, an AWS service for storing secrets.

For detailed info about using chamber, please read The Right Way To Manage Secrets

v3.0 Breaking Changes

  • Use of the SSM Parameter Store's path-based API is now required. Support added in v2.0 to avoid it has been removed. The CHAMBER_NO_PATHS environment variable no longer has any effect. You must migrate to the new storage format using the instructions below, using a 2.x version of chamber.
  • The --min-throttle-delay option no longer has any effect. Support for specifying a minimum throttle delay has been removed from the underlying AWS SDK with no direct replacement. Instead, set the new --retry-mode option to "adaptive" to use an experimental model that accounts for throttling errors.
  • Context arguments are required for Store methods. This is a consequence of migrating to a new AWS SDK. This change has no effect for CLI users, but those using chamber as a library must update their code to pass contexts.
  • The deprecated NewS3Store constructor has been removed. Use NewS3StoreWithBucket instead.

v2.0 Breaking Changes

Starting with version 2.0, chamber uses parameter store's path based API by default. Chamber pre-2.0 supported this API using the CHAMBER_USE_PATHS environment variable. The paths based API has performance benefits and is the recommended best practice by AWS.

As a side effect of this change, if you didn't use path based secrets before 2.0, you will need to set CHAMBER_NO_PATHS to enable the old behavior. This option is deprecated, and We recommend only using this setting for supporting existing applications.

To migrate to the new format, you can take advantage of the export and import commands. For example, if you wanted to convert secrets for service foo to the new format using chamber 2.0, you can do:

CHAMBER_NO_PATHS=1 chamber export foo | chamber import foo -

v2.13.0 Breaking Changes

Support for very old versions of Go has been dropped, and chamber will only test against versions of Go covered by the Go Release Policy, e.g. the two most recent major versions. This will ensure that we can reliably update dependencies as needed. Additionally, chamber binaries will be built with the latest stable version of Go at the time of release.

Installing

If you have a functional go environment, you can install with:

go install github.com/segmentio/chamber/v3@latest

Caveat About chamber version and go install

Note that installing with go install will not produce an executable containing any versioning information. This information is passed at compilation time when the Makefile is used for compilation. Without this information, chamber version outputs the following:

$ chamber version
chamber dev

See the wiki for more installation options like Docker images, Linux packages, and precompiled binaries.

Authenticating

Using chamber requires you to be running in an environment with an authenticated AWS user which has the appropriate permission to read/write values to SSM Parameter Store.

This is going to vary based on your organization but chamber needs AWS credentials to run.

One of the easiest ways to do so is by using aws-vault. To adjust these instructions for your needs, examine the env output of Aws-Vault: How It Works and use your organization's secrets tool accordingly with chamber.

An aws-vault Usage Example With Chamber

aws-vault exec prod -- chamber

For this reason, it is recommended that you create an alias in your shell of choice to save yourself some typing, for example (from my .zshrc):

alias chamberprod='aws-vault exec production -- chamber'

Setting Up KMS

Chamber expects to find a KMS key with alias parameter_store_key in the account that you are writing/reading secrets. You can follow the AWS KMS documentation to create your key, and follow this guide to set up your alias.

If you are a Terraform user, you can create your key with the following:

resource "aws_kms_key" "parameter_store" {
  description             = "Parameter store kms master key"
  deletion_window_in_days = 10
  enable_key_rotation     = true
}

resource "aws_kms_alias" "parameter_store_alias" {
  name          = "alias/parameter_store_key"
  target_key_id = "${aws_kms_key.parameter_store.id}"
}

If you'd like to use an alternate KMS key to encrypt your secrets, you can set the environment variable CHAMBER_KMS_KEY_ALIAS. As an example, the following will use your account's default SSM alias: CHAMBER_KMS_KEY_ALIAS=aws/ssm

Usage

Writing Secrets

$ chamber write <service> <key> <value|->

This operation will write a secret into the secret store. If a secret with that key already exists, it will increment the version and store a new value.

If - is provided as the value argument, the value will be read from standard input.

Secret keys are normalized automatically. The - will be _ and the letters will be converted to upper case (for example a secret with key secret_key and secret-key will become SECRET_KEY).

Reserved Service Names

Starting with version 3.0, the service name "_chamber" is reserved for chamber's internal use. You will be warned when using the service for any chamber operation.

Tagging on Write

$ chamber write <service> <key> <value> --tags key1=value1,key2=value2

This operation will write a secret into the secret store with the specified tags. Tagging on write is only available for new secrets.

Tagging Secrets

$ chamber tag write <service> <key> tag1=value1 tag2=value2
Key Value
tag1  value1
tag2  value2
$ chamber tag read <service> <key>
Key Value
tag1  value1
tag2  value2
$ chamber tag delete <service> <key> tag1
$ chamber tag read <service> <key>
Key Value
tag2  value2

Writing tags normally leaves other tags intact. If you want to replace all tags with the new ones, use --delete-other-tags flag. Note: The option may change before the next major release.

$ chamber tag write --delete-other-tags <service> <key> tag1=value1
Key Value
tag1  value1

Listing Secrets

$ chamber list service
Key         Version                  LastModified      User
apikey      2                        06-09 17:30:56    daniel-fuentes
other       1                        06-09 17:30:34    daniel-fuentes

Listing secrets should show the key names for a given service, along with other useful metadata including when the secret was last modified, who modified it, and what the current version is.

$ chamber list -e service
Key         Version                  LastModified      User             Value
apikey      2                        06-09 17:30:56    daniel-fuentes   apikeyvalue
other       1                        06-09 17:30:34    daniel-fuentes   othervalue

Listing secrets with expand parameter should show the key names and values for a given service, along with other useful metadata including when the secret was last modified, who modified it, and what the current version is.

Historic view

$ chamber history service key
Event       Version     Date            User
Created     1           06-09 17:30:19  daniel-fuentes
Updated     2           06-09 17:30:56  daniel-fuentes

The history command gives a historical view of a given secret. This view is useful for auditing changes, and can point you toward the user who made the change so it's easier to find out why changes were made.

Exec

$ chamber exec <service...> -- <your executable>

exec populates the environment with the secrets from the specified services and executes the given command. Secret keys are converted to upper case (for example a secret with key secret_key will become SECRET_KEY).

Secrets from services are loaded in the order specified in the command. For example, if you do chamber exec app apptwo -- ... and both apps have a secret named api_key, the api_key from apptwo will be the one set in your environment.

Reading

$ chamber read service key
Key             Value                           Version         LastModified    User
key             secret                          1               06-09 17:30:56  daniel-fuentes

read provides the ability to print out the value of a single secret, as well as the secret's additional metadata. It does not provide the ability to print out multiple secrets in order to discourage accessing extra secret material that is unneeded. Parameter store automatically versions secrets and passing the --version/-v flag to read can print older versions of the secret. Default version (-1) is the latest secret.

Exporting

$ chamber export [--format <format>] [--output-file <file>]  <service...>
{"key":"secret"}

export provides ability to export secrets in various file formats. The following file formats are supported:

  • json (default)
  • yaml
  • java-properties
  • csv
  • tsv
  • dotenv
  • tfvars

File is written to standard output by default but you may specify an output file.

Caveat About Environment Variables

chamber can emit environment variables in both dotenv format and exported shell environment variables. As chamber allows creating key names that are themselves not valid shell variable names, secrets emitted in this format will have their keys modified to confirm to POSIX shell environment variable naming rules:

  • variable names must begin with a letter or an underscore
    • variable names must not begin with a number
  • variable names must only contain letters, numbers, or underscores

Notes About Dotenv Format

As there is no formal dotenv spec, chamber attempts to adhere to compliance with joho/godotenv (which is itself a port of the Ruby library bkeepers/dotenv). The output should be generally cross-compatible with alternative parsers, but without a formal spec compatibility is not guaranteed.

Of note:

  • all key names will be sanitized according the the POSIX shell rules above, and cast to uppercase
  • all values will be rendered using special characters instead of string literals, e.g. newlines replaced with the character \n, tabstops replaced with the character \t, etc.
    • no whitespace trimming will be performed on any values

Notes About Exported Environment Variables

Alternatively, chamber may be used to set local environment variables directly with the chamber env command. For example,

source <(chamber env service)`
printf "%s" "$SERVICE_VAR"

Note that all secrets printed this way will be prefixed with export, so if sourced inline as in the above example, then any and all secrets will then be available to any process run after sourcing.

the env subcommand supports output formatting in two specific ways:

chamber env -h
Print the secrets from the parameter store in a format to export as environment variables

Usage:
  chamber env <service> [flags]

Flags:
  -p, --preserve-case    preserve variable name case
  -e, --escape-strings   escape special characters in values

As chamber allows creation of keys with mixed case, --preserve-case will ensure that the original key case is preserved. Note that this will not prevent the key name from being sanitized according to the above POSIX shell rules. By default, values will be rendered using string literals, e.g. newlines will be printed as literal newlines, tabstops as literal tabstops. Output may be emitted using escaped special characters instead (identical to chamber export -o dotenv)) by using the flag --escape-strings.

Importing

$ chamber import [--normalize-keys] <service> <filepath>

import provides the ability to import secrets from a json or yaml file (like the kind you get from chamber export).

Note By default, import will not normalize key inputs, meaning that keys will be written to the secrets backend in the format they exist in the source file. In order to normalize keys on import, provide the --normalize-keys flag

When normalizing keys, before write, the key will be be first converted to lowercase to match how chamber write handles keys.

Example: DB_HOST will be converted to db_host.

You can set filepath to - to instead read input from stdin.

Deleting

$ chamber delete [--exact-key] service key

delete provides the ability to remove a secret from chamber permanently, including the secret's additional metadata. There is no way to recover a secret once it has been deleted so care should be taken with this command.

Note By default, delete will normalize any provided keys. To change that behavior, provide the --exact-key flag to attempt to delete the raw provided key.

Example: Given the following setup,

$ chamber list service
Key         Version                  LastModified      User
apikey      2                        06-09 17:30:56    daniel-fuentes
APIKEY      1                        06-09 17:30:34    daniel-fuentes

Calling

$ chamber delete --exact-key service APIKEY

will delete only APIKEY from the service and leave only

$ chamber list service
Key         Version                  LastModified      User
apikey      2                        06-09 17:30:56    daniel-fuentes

Finding

$ chamber find key

find provides the ability to locate which services use the same key names.

$ chamber find value --by-value

Passing --by-value or -v will search the values of all secrets and return the services and keys which match.

Listing Services

$ chamber list-services [<prefix>]

list-services lists the available services. You can provide a prefix to limit the results.

AWS Region

Chamber uses AWS SDK for Go. To use a region other than what is specified in $HOME/.aws/config, set the environment variable "AWS_REGION".

$ AWS_REGION=us-west-2 chamber list service
Key         Version                  LastModified      User
apikey      3                        07-10 09:30:41    daniel-fuentes
other       1                        07-10 09:30:35    daniel-fuentes

Chamber does not currently read the value of "AWS_DEFAULT_REGION". See https://github.com/aws/aws-sdk-go#configuring-aws-region for more details.

If you'd like to use a different region for chamber without changing AWS_REGION, you can use CHAMBER_AWS_REGION to override just for chamber.

Custom SSM Endpoint

If you'd like to use a custom SSM endpoint for chamber, you can use CHAMBER_AWS_SSM_ENDPOINT to override the default URL.

AWS Secrets Manager

Chamber supports AWS Secrets Manager as an optional backend. For example:

chamber -b secretsmanager write myservice foo fah
chamber -b secretsmanager write myservice foo2 fah2

Custom Secrets Manager Endpoint

If you'd like to use a custom Secrets Manager endpoint for chamber, you can use CHAMBER_AWS_SECRETS_MANAGER_ENDPOINT to override the default URL.

Warning

Prior to v3.0.0, the endpoint could also be overridden with CHAMBER_AWS_SSM_ENDPOINT. This has been deprecated and will stop working in a future chamber release. Please use CHAMBER_AWS_SECRETS_MANAGER_ENDPOINT instead.

S3 Backend (Experimental)

By default, chamber store secrets in AWS Parameter Store. We now also provide an experimental S3 backend for storing secrets in S3 instead.

To configure chamber to use the S3 backend, use chamber -b s3 --backend-s3-bucket=mybucket. Preferably, this bucket should reject uploads that do not set the server side encryption header (see this doc for details how)

This feature is experimental, and not currently meant for production work.

S3 Backend using KMS Key Encryption (Experimental)

This backend is similar to the S3 Backend but uses KMS Key Encryption to encrypt your documents at rest, similar to the SSM Backend which encrypts your secrets at rest. You can read how S3 Encrypts documents with KMS here.

The highlights of SSE-KMS are:

  • You can choose to create and manage encryption keys yourself, or you can choose to use your default service key uniquely generated on a customer by service by region level.
  • The ETag in the response is not the MD5 of the object data.
  • The data keys used to encrypt your data are also encrypted and stored alongside the data they protect.
  • Auditable master keys can be created, rotated, and disabled from the AWS KMS console.
  • The security controls in AWS KMS can help you meet encryption-related compliance requirements.

Source: Protecting data using server-side encryption with AWS Key Management Service keys (SSE-KMS)

To configure chamber to use the S3 KMS backend, use chamber -b s3-kms --backend-s3-bucket=mybucket --kms-key-alias=alias/keyname. You must also supply an environment variable of the KMS Key Alias to use CHAMBER_KMS_KEY_ALIAS, by default "alias/parameter_store_key" will be used.

Preferably, this bucket should reject uploads that do not set the server side encryption header (see this doc for details how)

When changing secrets between KMS Keys, you must first delete the Chamber secret with the existing KMS Key, then write it again with new KMS Key.

If services contain multiple KMS Keys, chamber list and chamber exec will only show Chamber secrets encrypted with KMS Keys you have access to.

This feature is experimental, and not currently meant for production work.

Null Backend (Experimental)

If it's preferred to not use any backend at all, use chamber -b null. Doing so will forward existing ENV variables as if Chamber is not in between.

This feature is experimental, and not currently meant for production work.

Analytics

chamber includes some usage analytics code which Segment uses internally for tracking usage of internal tools. This analytics code is turned off by default, and can only be enabled via a linker flag at build time, which we do not set for public github releases.

Releasing

To cut a new release, just push a tag named v<semver> where <semver> is a valid semver version. This tag will be used by Github Actions to automatically publish a github release.


THE CHAMBER OF SECRETS HAS BEEN OPENED