Replies: 7 comments 2 replies
-
I've made a start with the page. Hopefully others can add and improve. |
Beta Was this translation helpful? Give feedback.
-
how is GP850 explicitly not supported and potentially supported? |
Beta Was this translation helpful? Give feedback.
-
Also, what branch do we need to build to try those? 2.0.0-rc1 seem to not support the i2c source addr option |
Beta Was this translation helpful? Give feedback.
-
2.0.0-dev |
Beta Was this translation helpful? Give feedback.
-
Hello, I did try switching monitor on LG 34UM88C-P on Pop!_OS 22.04 LTS and unlike other LG display it seems to work pretty well without the last version. I wanted to share this information. I did try this on both PBP and standard mode.
In fact the correct value are:
❯ ddcutil --display 1 getvcp 60
VCP code 0x60 (Input Source ): Invalid value (sl=0x00)
The value is incorrect, but the switch does work as expected: ❯ ddcutil setvcp 60 0x10 |
Beta Was this translation helpful? Give feedback.
-
Reporting my findings on my 27UL600:
|
Beta Was this translation helpful? Give feedback.
-
For 38WR85QC-W Works with 0xF4 on the 0x50 address: x00D0 = Display Port I think 0x0090 and 91 are HDMI1/2 as they respond, but I don't have anything hooked up there. |
Beta Was this translation helpful? Give feedback.
-
This page is a continuation of the extensive discussion on issue #100, LG29UM69G fails switching input.
Beta Was this translation helpful? Give feedback.
All reactions