Skip to content

Latest commit

 

History

History
262 lines (186 loc) · 12.7 KB

CONTRIBUTING.md

File metadata and controls

262 lines (186 loc) · 12.7 KB
Raw

Contributing

Introduction

Welcome! Thank you for contributing to SchemaStore!

There are various ways you can contribute:

  • Add a new JSON Schema
    • Local schema
    • Remote schema
  • Enhance existing JSON schemas:
    • Fix typos
    • Fix bugs
    • Improve constraints
    • Add positive/negative tests
    • Refactor to pass under strict mode

Most people want to add a new schema. For steps on how to do this, read the How to add a new JSON Schema section below.

If you want to contribute, but not sure what needs fixing, see the help wanted and good first issue labels on GitHub.

Overview

Schema files are located in src/schemas/json. Each schema file has a corresponding entry in the Schema Catalog. Each catalog entry has a fileMatch field. IDEs use this field to know which files the schema should be used for (in autocompletion).

Some schema files have associated positive and negative tests, located at src/test and src/negative_test, respectively. This repository has Grunt tasks that automatically load these files and use a validator (either AJV or SchemaSafe) to ensure that they either pass or fail validation.

There are three types of schema validation modes:

  • AJV strict mode: The default validation mode that is most stringent
  • AJV non-strict mode: Some rules are relaxed for the sake of brevity. To validate under non-strict mode, add your schema to the ajvNotStrictMode field in schema-validation.json
  • SchemaSafe: Helps catch errors within schemas that would otherwise be missed. This is a WIP.

Recommended Extensions

We highly recommend installing the following extensions for your IDE:

  • EditorConfig to automatically configure editor settings
  • Prettier to automatically configure file formatting

If you are modifying JavaScript files, we also recommend:

  • ESLint to automatically show JavaScript issues

Troubleshooting

  • There may be git merge conflicts in catalog.json because you added the item to the end of the list instead of alphabetically
  • The pre-commit build server failed because the PR was created/push from an organization and not from your own account

Best practices

✔️ Use the most recent JSON Schema version (specified by $schema) that's widely supported by editors and IDEs. Currently, the best supported version is draft-07. Later versions of JSON Schema are not recommended for use in SchemaStore until editor/IDE support improves for those versions.

✔️ Use base.json schema for draft-07 and base-04.json for draft-04 with some common types for all schemas.

You can also prefer our own unofficial draft-07 schema with more extensive validation capabilities like:

  • type, title, description properties are required
  • empty arrays are forbidden in most cases, for instance, it's impossible to write less than 2 sub-schemas for allOf
  • type can't be an array, which is intentional, anyOf/oneOf should be used in this case
  • links to https://json-schema.org/understanding-json-schema/index.html available for almost all hints

❌ Don't forget add test files.

  • Always be consistent across your schema: order properties and describe in the one style.
  • Always use $comment to note about something to developers. You can refer to some issues here.
  • Always use title when property type is an object to enhance editor experience which use this property to show errors (like VS Code). Why?
  • Always use description, type, additionalProperties.
    • Always set additionalProperties to false until documentation permits additional properties explicitly. That tool the JSON schema is created for can be changed in the future to allow wrong extra properties.
  • Always use minLength/maxLength/pattern/etc for property values.
  • Don't end title/description values with colon.
  • Always omit leading articles for title-s and trailing punctuation to make expected object values look more like types in programming languages. Also start title-s with a lowercase letter and try use nouns for titles instead of sentences.
  • Always explicitly state whether some setting is global for some tool or local for a project created with this tool. For instance if some settings is local then add for the current <project-type> at the end of the description like Whether to ignore a theme configuration for the current site for Jekyll.
  • Always add documentation url to descriptions when available in the following format: <description>\n<url> like "Whether to ignore a theme configuration for the current site\nhttps://jekyllrb.com/docs/configuration/options/#global-configuration".
  • Don't add undocumented properties or features to the schema.

How-to

How to add a JSON Schema that's local to this repository

Follow these instructions if you want to add the JSON schema file directly to this repository. If you want to keep the JSON schema hosted elsewhere, see How to add a JSON Schema that's self-hosted/remote/external.

When uploading a new schema file, make sure it targets a file that is commonly used or has potential for broad uptake.

First, clone the repository:

git clone https://github.com/SchemaStore/schemastore
cd schemastore

Be sure that NodeJS is installed. The minimum required NodeJS version is defined by the engines key in package.json. Now, install dependencies and run the new_schema Grunt task:

cd src
npm install
npm run grunt new_schema

You will be prompted for the name of the schema. Once you enter your schema name, the task will:

  • Create a new schema file at src/schemas/json/<schemaName>.json
  • Create a positive test file at src/test/<schemaName>/<schemaName>.json
  • Print a string for you to add to the Schema Catalog

If you do not wish to use the new_schema Grunt task, the manual steps are listed below 👇

Manual Steps

  1. Create a schema file in src/schemas/json/<name>.json:

    {
  "$id": "https://json.schemastore.org/<schemaName>.json",
  "$schema": "http://json-schema.org/draft-07/schema#",
  "additionalProperties": true,
  "properties": {},
  "type": "object"
}

  2. Add positive test files at src/test/<schemaName>/<testFile>: (optional, but strongly recommended)

    File extensions .json, .toml, .yml, and .yaml are supported.

  3. Add negative test files at src/negative_test/<schemaName>/<testFile> (optional)

  4. Register your schema (in alphabetical order) in the schema catalog:

    {
  "description": "Schema description",
  "fileMatch": ["list of well-known filenames matching schema"],
  "name": "Friendly schema name",
  "url": "https://json.schemastore.org/<schemaName>.json"
}

Once you have created the schema and its associated testing files, you can run the Grunt task that validates that your schema is correct:

cd src
npm run grunt

To test a single schema, execute npm run grunt -- --SchemaName=<schemaName.json>.

Note that <schemaName.json> refers to the filename that the schema has under src/schemas/json. If the task succeeds, your changes are valid and you can safely create a PR.

How to add a JSON Schema that's self-hosted/remote/external

You may wish to serve a schema from https://json.schemastore.org/<schemaName>.json, but keep the content of the schema file at a place you control (not this repository).

See this PR as an example. Simply register your schema in the schema catalog, with the url field pointing to your schema file:

{
  "name": "hydra.yml",
  "description": "ORY Hydra configuration file",
  "fileMatch": [
    "hydra.json",
    "hydra.yml",
    "hydra.yaml",
    "hydra.toml"
  ],
  "url": "https://raw.githubusercontent.com/ory/hydra/master/.schema/version.schema.json"
},

How to add a schema with multiple versions

Refer to this agripparc PR as an example. First, your schema names should be postfixed with the version number.

  • src/schemas/json/agripparc-1.2.json
  • src/schemas/json/agripparc-1.3.json
  • src/schemas/json/agripparc-1.4.json

Then, use the versions field to list each of them. Add the latest version to the url field:

{
  "description": "JSON schema for the Agrippa config file",
  "fileMatch": [".agripparc.json", "agripparc.json"],
  "name": ".agripparc.json",
  "url": "https://json.schemastore.org/agripparc-1.4.json",
  "versions": {
    "1.2": "https://json.schemastore.org/agripparc-1.2.json",
    "1.3": "https://json.schemastore.org/agripparc-1.3.json",
    "1.4": "https://json.schemastore.org/agripparc-1.4.json"
  }
}

How to move a schema from SchemaStore to somewhere that's self-hosted

Simply changing the url field in the schema catalog (as described here) is not enough. You must also:

  • Keep the original schema files in the repository and point to your schema with $ref
  • Add an entry under skiptest so the remaining schema file isn't tested

See this PR for a full example.

How to include a $ref to a SchemaStore schema

$ref from schema_x.json to schema_y.json

  • Both schemas must exist locally in SchemaStore.
  • Both schemas must have the same draft (ex. draft-07)
  • schema_y.json must have id or $id with this value "https://json.schemastore.org/schema_y.json"
  • In schema_x.json, add ref to schema_y.json: "$ref": "https://json.schemastore.org/schema_y.json#..."
  • Within schema-validation.json, in "options": [], add an entry: { "schema_x.json": {"externalSchema": ["schema_y.json"] } }

How to include a $ref to an external schema

This currently isn't possible. This is tracked by issue #2731.

How to validate schema in non-strict mode

Info > Please only do this if you must. Validating in strict mode catches many common errors by schema authors and improves schema quality.

When validating your schema, you may encounter errors like:

>> compile              | schemas/json/prefect-deploy.json (draft-07)(FullStrictMode)
>> Error: strict mode: use allowUnionTypes to allow union type keyword at "#/definitions/prefect_docker.deployments.steps.push_docker_image/properties/credentials" (strictTypes)

A full list is available at the avj documentation. To disable any of the strict validation errors, please add your schema file to the ajvNotStrictMode field in src/schema-validation.json.