Skip to content

Latest commit

 

History

History
167 lines (121 loc) · 5.97 KB

power-consumption-tests.md

File metadata and controls

167 lines (121 loc) · 5.97 KB

PC Engines apu3 power consumption tests

We have started research and measurements of power consumption on apu platforms. Our goal is to optimize (if possible) power management on coreboot level. First stage of work is to collect data from various tests and create reports. For that purpose we have used RTE with power monitor sensor. RTE stands for Remote Testing Environment and it is a tool which helps debugging and testing devices. RTE gathers all necessary interfaces and ports in one device. Therefore, it is very versatile and convenient to use. More information can be found on 3mdeb official website. It is also place where you can buy it.

This document gathers all already carried out tests, their results and our conclusions. Over time, we will conduct next tests and hence extend this document with further reports.

Tests

apu3 stress-test cpu

Test case is following:

  1. Power on RTE and power on apu3.
  2. Boot to Debian 10 (buster) with kernel 4.19 on apu3.
  3. Start measurements on RTE: constantly measure bus voltage, current and input power in 0.5 seconds time intervals and save them to text file.
  4. After 10 seconds from starting measurements, invoke sysbench command on apu3.
  5. When sysbench finished, wait ~25 seconds and invoke command again.
  6. When sysbench command was invoked 10 times, finish entire test.

Results with coreboot v4.11.0.4

Above test was performed with coreboot v4.11.0.4 which doesn't have ASPM (Active State Power Management) enabled. This feature was introduced in v4.11.0.5 release.

$ sysbench cpu run --threads=4 --events=10000 --cpu-max-prime=20000 --time=0 --validate
sysbench 1.0.19 (using bundled LuaJIT 2.1.0-beta2)

Running the test with following options:
Number of threads: 4
Validation checks: on.

Initializing random number generator from current time


Prime numbers limit: 20000

Initializing worker threads...

Threads started!

CPU speed:
    events per second:   539.76

General statistics:
    total time:                          18.5220s
    total number of events:              10000

Latency (ms):
         min:                                    6.40
         avg:                                    7.41
         max:                                    8.13
         95th percentile:                        7.70
         sum:                                74064.78

Threads fairness:
    events (avg/stddev):           2500.0000/18.61
    execution time (avg/stddev):   18.5162/0.00

sysbench-voltage

sysbench-current

sysbench-power

Conclusions

In idle state, when only Debian is running without any commands and applications, power consumption oscillates around 4W. It increases to almost 6W (~5.8W) when sysbench is running. That change is mainly caused by current rise. However, simultaneously there is a little voltage drop on the bus. As you can see it drops from about 12.18 V to 12.12 V. That behavior is normal - the greater the load, the greater voltage decrease can be observed. It is rather related to quality of power supply and wires than to end device. Moreover, as this voltage drop is slight, it can be omitted in analysis.

Results with coreboot v4.11.0.5

Above test was repeated with coreboot v4.11.0.5 which has ASPM (Active State Power Management) enabled. Exactly same test case was carried out and same measurements were taken.

$ sysbench cpu run --threads=4 --events=10000 --cpu-max-prime=20000 --time=0 --validate
sysbench 1.0.19 (using bundled LuaJIT 2.1.0-beta2)

Running the test with following options:
Number of threads: 4
Validation checks: on.

Initializing random number generator from current time


Prime numbers limit: 20000

Initializing worker threads...

Threads started!

CPU speed:
    events per second:   539.80

General statistics:
    total time:                          18.5200s
    total number of events:              10000

Latency (ms):
         min:                                    6.36
         avg:                                    7.41
         max:                                    8.17
         95th percentile:                        7.70
         sum:                                74053.97

Threads fairness:
    events (avg/stddev):           2500.0000/18.79
    execution time (avg/stddev):   18.5135/0.00

sysbench-voltage-2

sysbench-current-2

sysbench-power-2

coreboot v4.11.0.4 vs v4.11.0.5

Comparing those results to previous one (with coreboot v4.11.0.4), following differences can be noticed:

  • average bus voltage level in idle state and during stress-test is slightly larger with coreboot v4.11.0.5 than coreboot v4.11.0.4; however, those differences are only about 0,01/0,02 V, which makes 0,17% measurement error. As power monitor sensor accuracy is up to 1%, obtained error is within the norm;
  • in idle state, power consumption oscillates around 3.5W and when sysbench is running it increases to 5.3W top; it is improvement by approximately 0.5W in each state against coreboot v4.11.0.4;

Remarks

Carried out tests are definitely insufficient to draw far-reaching conclusions. There must be done more tests which involve another hardware components and operations. It is already on our roadmap and we should successively introduce more. Although it is beginning of research, we already have some remarks and leads:

  • power monitor sensor seems to work fine, the more there are estimated differences in power consumption with different coreboot versions;
  • before moving to optimization stage, we need to collect large enough and diverse database - so far we have carried out only one test;
  • we should setup exact same test suite (with the same apu platform, firmware, operating system and power monitor sensor) to confirm that results are repeatable;