Pasbery Pi Zero 2W with ILI9341

[Victuar98]

I apologize for the annoying intrusiveness in my questions, but I am completely confused...((( TFT 3.5" ILI9488 display (320x480) is successfully connected to the Raspberry Pi Zero W2 and displays an image. However, the text, or rather part of the text (!!!) displayed mirrored. The -DDISPLAY_ROTATE_180_DEGREES=ON parameter does not solve the problem. The origin of coordinates is located correctly, in the upper left corner, the lines are filled from left to right and top to bottom, but the text itself is mirrored! In this case, the image [OK] is displayed correctly! ?????

[Victuar98]

Hi! I just saw your message in the mail, I'm sorry. In the end, I managed to solve the problem with the display, although I still did not understand the source of this error and the display itself had to be turned 180 degrees. In the file ILI9486_SPI.cpp I had to change some bits: #define ILI9486_SPI_CASET 0x2A #define ILI9486_SPI_PASET 0x2B #define ILI9486_SPI_RAMWR 0x2C #define ILI9486_SPI_RAMRD 0x2E #define ILI9486_SPI_MADCTL 0x36 #define MADCTL_MY 0x80 #define MADCTL_MX 0x40 #define MADCTL_MV 0x60 #define MADCTL_ML 0x10 #define MADCTL_BGR 0x00 #define MADCTL_MH 0x04 Now to answer your question, I regret that I did not really understand your problem. Can't you connect the ILI9486/9341 display to the Raspberry Pi Zero 2W? If you describe everything in a little more detail, then I will try to help you within my capabilities.))) If you need configuration and other files, then please, I will give them to you. For the display driver to work successfully, you only need (!) a 32-bit OS. It is set as standard - via Rasperry Imager, the rest of the settings are standard for linux. Something like that... ср, 7 февр. 2024 г. в 21:48, Nicolas Bruno ***@***.***>:

…

Hi, I can't even install the drivers on the Raspberry Pi Zero 2, the process stops with this error: "vc_dispmanx_display_open failed! Make sure to have hdmi_force_hotplug=1 setting in /boot/config.txt" even though I've edited the config.txt file and restarted, I can't solve the problem. Can you tell me how you managed to make it work? What version of the operating system did you install? — Reply to this email directly, view it on GitHub <#323 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/A4UFCFJRN7DVUYOXAWLZEA3YSPD7ZAVCNFSM6AAAAABBBVYQACVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMZSGY3DIMJZG4> . You are receiving this because you authored the thread.Message ID: ***@***.***>

[Victuar98]

Hi! I just saw your message in the mail, I'm sorry. In the end, I managed to solve the problem with the display, although I still did not understand the source of this error and the display itself had to be turned 180 degrees. In the file ILI9486_SPI.cpp I had to change some bits: #define ILI9486_SPI_CASET 0x2A #define ILI9486_SPI_PASET 0x2B #define ILI9486_SPI_RAMWR 0x2C #define ILI9486_SPI_RAMRD 0x2E #define ILI9486_SPI_MADCTL 0x36 #define MADCTL_MY 0x80 #define MADCTL_MX 0x40 #define MADCTL_MV 0x60 #define MADCTL_ML 0x10 #define MADCTL_BGR 0x00 #define MADCTL_MH 0x04 Now to answer your question, I regret that I did not really understand your problem. Can't you connect the ILI9486/9341 display to the Raspberry Pi Zero 2W? If you describe everything in a little more detail, then I will try to help you within my capabilities.))) If you need configuration and other files, then please, I will give them to you. For the display driver to work successfully, you only need (!) a 32-bit OS. It is set as standard - via Rasperry Imager, the rest of the settings are standard for linux. Something like that... ср, 28 февр. 2024 г. в 13:25, Burbycian Burbycianovich ***@***.***

…

: Hi! I just saw your message in the mail, I'm sorry. In the end, I managed to solve the problem with the display, although I still did not understand the source of this error and the display itself had to be turned 180 degrees. In the file ILI9486_SPI.cpp I had to change some bits: #define ILI9486_SPI_CASET 0x2A #define ILI9486_SPI_PASET 0x2B #define ILI9486_SPI_RAMWR 0x2C #define ILI9486_SPI_RAMRD 0x2E #define ILI9486_SPI_MADCTL 0x36 #define MADCTL_MY 0x80 #define MADCTL_MX 0x40 #define MADCTL_MV 0x60 #define MADCTL_ML 0x10 #define MADCTL_BGR 0x00 #define MADCTL_MH 0x04 Now to answer your question, I regret that I did not really understand your problem. Can't you connect the ILI9486/9341 display to the Raspberry Pi Zero 2W? If you describe everything in a little more detail, then I will try to help you within my capabilities.))) If you need configuration and other files, then please, I will give them to you. For the display driver to work successfully, you only need (!) a 32-bit OS. It is set as standard - via Rasperry Imager, the rest of the settings are standard for linux. Something like that... ср, 7 февр. 2024 г. в 21:48, Nicolas Bruno ***@***.***>: > Hi, I can't even install the drivers on the Raspberry Pi Zero 2, the > process stops with this error: "vc_dispmanx_display_open failed! Make sure > to have hdmi_force_hotplug=1 setting in /boot/config.txt" even though I've > edited the config.txt file and restarted, I can't solve the problem. Can > you tell me how you managed to make it work? What version of the operating > system did you install? > > — > Reply to this email directly, view it on GitHub > <#323 (comment)>, > or unsubscribe > <https://github.com/notifications/unsubscribe-auth/A4UFCFJRN7DVUYOXAWLZEA3YSPD7ZAVCNFSM6AAAAABBBVYQACVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMZSGY3DIMJZG4> > . > You are receiving this because you authored the thread.Message ID: > ***@***.***> >