Mounten eines Fritz!Nas Volumes nicht möglich #2372
-
Describe the issue you are experiencingDer Testversuch des Einhängens eines Fritz!Nas-Ordners mittels der bekannten, dokumentierten & angepassten Methode mount -t cifs -o noserverino,vers=3.11,username=USER,password=PASS //192.168.1.1/fritz.nas/test/RM_B /mnt schlägt fehl. Auch mittels angepasstem Pfad unter aktuellem Fritz!OS 7.52 mount -t cifs -o noserverino,vers=3.11,username=USER,password=PASS //192.168.1.1/nas#/files//RM_B /mnt schlägt der Versuch mittels Fehlermeldung "No such file or directory" fehl. Scheinbar wird der Pfad bei der Kommandoausführung nicht komplett übernommen bzw. ausgewertet. Offensichtlich wird das Rautezeichen im übergebenen Pfad nicht erkannt. Auch ein setzen des Zeichens, oder auch Auf Sonderzeichen in Benutzernamen und Passwort wurde bewusst verzichtet. Describe the behavior you expectedDas Mounten von Fritz!Nas-Verzeichnissen sollte funktionieren. Steps to reproduce the issue
What is the version this bug report is based on?3.69.7-20230506 Which base platform are you running?rpi3 (RaspberryPi3) Which HomeMatic/homematicIP radio module are you using?RPI-RF-MOD Anything in the logs that might be useful for us?Da Kommandozeileneingabe, kein Log. Additional informationNo response |
Beta Was this translation helpful? Give feedback.
Replies: 2 comments 4 replies
-
Funktioniert bei meiner 6490 mit FW: 7.51 Letztlich musste Ist aber kein RaspberryMatic-Problem. |
Beta Was this translation helpful? Give feedback.
-
Bei mir ebenfalls fehlerfrei an der 6660 mit FW 7.56
+1 |
Beta Was this translation helpful? Give feedback.
/bin/mount -t cifs -o noserverino,vers=3.11,username=USER,password=PASS //192.168.1.1/FRITZ.NAS/test/RM_B /mnt
Funktioniert bei meiner 6490 mit FW: 7.51
Letztlich musste
fritz.nas
nur inFRITZ.NAS
geändert werden.Ist aber kein RaspberryMatic-Problem.