diff --git a/docs/add-contracts.md b/docs/add-contracts.md
index 7908b03..7b2a159 100644
--- a/docs/add-contracts.md
+++ b/docs/add-contracts.md
@@ -2,7 +2,7 @@
 Once you have successfully created your project, you can add contract templates. You first need to navigate to your project's directory and run the following command:
 
 ```
-jenesis add contract <TEMPLATE> <CONTRACT NAME>
+jenesis add contract <template> <contract_name>
 ```
 You can find all the contract templates available in [Jenesis Templates](https://github.com/fetchai/jenesis-templates).
 An example of how to add the template **cw20-base** with the name `my_token` is given below:
@@ -11,9 +11,9 @@ An example of how to add the template **cw20-base** with the name `my_token` is
 jenesis add contract cw20-base my_token
 ```
 
-If you need multiple deployments of the same contract, you can use the `-d` flag to specify multiple deployments and name them. 
+If you need multiple deployments of the same contract, you can use the `--deployments` or `-d` flag to specify multiple deployments and name them. 
 ```
-jenesis add contract <TEMPLATE> <CONTRACT NAME> -d <DEPLOYMENTS>
+jenesis add contract <template> <contract_name> [--deployments <deployments>]
 ```
 Jenesis will add the deployments to all profiles for the specified contract. 
 In the example below, `token_1` and `token_2` deployments have been added. This will allow you to deploy `my_token` contract with two different configurations. You can add as many deployments as you wish.
@@ -112,4 +112,4 @@ To attach the contract, you will need to specify the deployment's name and addre
 jenesis attach token_1 fetch18xs97q6h9zgh4sz730a42pp0dqa9sh4eef7eutfkv69q3v2y3x8s72pkua
 ```
 
-This will add the relevant deployment information into a `jenesis.lock` file and you will now be able to interact with `token_1` using [contract interactions](use-contracts.md) 
+This will add the relevant deployment information into a `jenesis.lock` file and you will now be able to interact with `token_1` using [contract interactions](use-contracts.md).
diff --git a/docs/compile-contracts.md b/docs/compile-contracts.md
index 2cfd58d..5642028 100644
--- a/docs/compile-contracts.md
+++ b/docs/compile-contracts.md
@@ -4,10 +4,10 @@ Compile your contracts by running the following command inside your
 project directory:
 
 ```
-jenesis compile
+jenesis compile [--optimize] [--rebuild] [--no-log]
 ```
 This will compile all packages in your project's contracts directory and output the wasm code under the artifacts directory. If using a cargo workspace, jenesis will automatically detect this and the compiled contracts will appear in the `contracts/artifacts/`. Otherwise, they will go to the `artifacts` directory under the individual contracts.
 
-By default, the contracts are simply compiled and not optimized. For an optimized build, use the flag `--optimize` or `-o`. To force a rebuild, use the flag `--rebuild` or `-r`. To show contract compilation logs, use the flag `--log` or `-l`. In case of compilation failure, the logs will show by default.
+By default, the contracts are simply compiled and not optimized. For an optimized build, use the flag `--optimize` or `-o`. To force a rebuild, use the flag `--rebuild` or `-r`. To suppress contract compilation logs, use the flag `--no-log`. In case of compilation failure, the logs will show by default.
 
 > *Note: ```jenesis compile``` requires that docker is running and configured with permissions for your user.*
\ No newline at end of file
diff --git a/docs/deploy-contracts.md b/docs/deploy-contracts.md
index bdda96f..b0e20a1 100644
--- a/docs/deploy-contracts.md
+++ b/docs/deploy-contracts.md
@@ -9,14 +9,14 @@ To deploy all the contracts inside a profile you have two options:
 1. Fill the `deployer_key` field for each contract inside the `jenesis.toml` file (keys can be different for each contract) and run the following command:
 
 ```
-jenesis deploy --profile profile_name
+jenesis deploy [--profile profile_name]
 ```
 Each contract inside the specified profile will be deployed with the specified key.
 
 2. Simply specify a certain key as an argument of the deploy command:
 
 ```
-jenesis deploy key_name --profile profile_name 
+jenesis deploy key_name [--profile profile_name]
 ```
 
 The `deployer_key` field will be ignored in this case and all contracts inside the specified profile will be deployed using the key `key_name`.
diff --git a/docs/index.md b/docs/index.md
index 395df5a..928107a 100644
--- a/docs/index.md
+++ b/docs/index.md
@@ -1,14 +1,24 @@
+# Introduction
+
 Jenesis is a command line tool for rapid contract and service development for the Fetch.ai blockchain ecosystem and other CosmWasm-enabled blockchains.
 
+# System Requirements
+
+Jenesis currently requires:
+- OS: Linux, MacOS
+- Python: 3.8 to 3.10
+- Docker: 20.10.22 or higher recommended
+- git: Any
+
 # Installation
 
-Install jenesis for Python 3.7 or newer via PyPI:
+Install via PyPI:
 
 ```
 pip install jenesis
 ```
 
-# Getting Started
+# Getting started
 There are multiple commands integrated into jenesis that allow you to perform a variety of tasks these commands are:
 
 - `new` 
@@ -26,10 +36,10 @@ There are multiple commands integrated into jenesis that allow you to perform a
 ## Create a new project
 Create a project using the ```new``` command
 ```
-jenesis new my_project --profile my_profile
+jenesis new my_project [--profile my_profile] [--network network_name]
 ```
 
-This will create a new directory called `my_project`. You can use `--profile` and `--network` optional arguments, when they aren't used, profile and network will be set to `testing` and `fetchai-testnet` respectively. Inside this directory a `jenesis.toml` file will be created containing the following information:
+This will create a new directory called `my_project`. You can use `--profile` and `--network` optional arguments; when they aren't used, profile and network will be set to `testing` and `fetchai-testnet` respectively. Inside this directory a `jenesis.toml` file will be created containing the following information:
 
 ```toml
 [project]
@@ -60,7 +70,7 @@ An empty `contracts` folder will also be created inside `my_project` directory t
 The ```init``` command is similar to the ```new``` command, but in this case, you won't need a project name argument since this command is intended to run inside an existing project directory.
 
 ```
-jenesis init
+jenesis init [--profile my_profile] [--network network_name]
 ```
 
 This command will create the same files and folders inside your project directory as the ones described for the ```new``` command.
@@ -98,6 +108,8 @@ mnemonic = "gap bomb bulk border original scare assault pelican resemble found l
 password = "12345678"
 moniker = "test-node"
 genesis_accounts = [ "fetch1vas6cc9650z0s08230ytqjphgzl5tcq9crqhhu",]
+timeout_commit = "5s"
+debug_trace = true
 ```
 In particular, to fund some accounts for testing, replace the `genesis_accounts`
 field with the addresses to be funded.
@@ -106,4 +118,16 @@ When running any of the commands `deploy`, `run`, `shell`, and `attach`,
 jenesis will check for a currently running local node, and if there is none, a new one will be created in a docker container.
 If you wish to keep a local node running, you need to set the `keep_running` parameter to `true`. Otherwise, nodes will be stopped after any of the command mentioned above finish running.
 
-At any time, you can start or stop a local node by running `jenesis network start/stop --profile <PROFILE>`
\ No newline at end of file
+At any time, you can start or stop a local node by running:
+```
+jenesis network start [--profile my_profile]
+```
+or
+```
+jenesis network stop [--profile my_profile]
+```
+
+To view the logs from the local node, run:
+```
+jenesis network logs [--profile my_profile]
+```
\ No newline at end of file
diff --git a/docs/use-contracts.md b/docs/use-contracts.md
index 7296fd7..685ebb9 100644
--- a/docs/use-contracts.md
+++ b/docs/use-contracts.md
@@ -147,4 +147,9 @@ jenesis run script.py
 
 And you will observe the same output as before. You can also specify the profile as an optional argument using `--profile`.
 
+Finally, you can pass arguments to the script just as you would to a standard python script by placing all the arguments to the script after the `--` delimiter:
+```
+jenesis run script.py [--profile profile_name] -- arg1 arg2 --key1 value1 --key2 value2
+```
+
 You can visit [CosmPy](https://docs.fetch.ai/CosmPy/) for more contract interaction examples.