engineyard-serverside is the serverside component of the Engine Yard Cloud CLI. This gem is invoked either by the Cloud dashboard or by the engineyard gem through helper gem engineyard-serverside-adapter.
The ey.yml file allows options to be saved for each environment to which an
application is deployed.
A typical Rails application will have a config/ey.yml like this:
---
# This is all you need for a typical rails application.
defaults:
migrate: true
migration_command: rake db:migrate
precompile_assets: true
The following ey.yml file shows other things that can be customized.
A typical application will not need most of these options.
---
# 'defaults' applies to all environments running this application.
# Only set these options if needed. The defaults are correct for most applications.
defaults:
bundler: detect # By default, bundler is detected via Gemfile. Options: true: always run bundler; false: never run bundler
composer: detect # By default, composer is detected via composer.lock. Options: true: always run composer; false: never run composer
npm: detect # By default, npm is detected via package.json. Options: true: always run npm; false: never run npm
bundle_without: GROUP1 GROUP2 # exclude groups on bundle install (default: test development)
bundle_options: --OPTION # extra bundle install options (--local, --quiet, etc; does not override bundle_without)
copy_exclude: # don't rsync the following dirs (some people like to skip .git)
- SOME_LARGE_DIR
maintenance_on_restart: false # show maintenance page during app restart (default: false except for glassfish and mongrel)
maintenance_on_migrate: true # show maintenance page during migrations (default: true)
precompile_assets: true # ensure rails assets precompilation (default: assets will be compiled if they are detected)
precomplie_assets_task: assets:precompile # override the assets:precompile rake task
precompile_assets_command: rake assets:precompile # override the entire precompile command (ignores precompile_assets_task)
precompile_unchanged_assets: false # if true, does not check git for changes before precompiling assets.
asset_dependencies: # a list of relative paths to search for asset changes during each deploy.
- app/assets # default
- lib/assets # default
- vendor/assets # default
- Gemfile.lock # default
- config/routes.rb # default
- config/application.rb # default
- config/requirejs.yml # custom option (be sure to include defaults if you specify this option)
asset_strategy: shifting # choose an alternet asset management strategy. See rails_assets/strategy.rb for more info.
asset_roles: :all # specify on which roles to compile assets (default: [:app, :app_master, :solo])
ignore_database_adapter_warning: true # hide database adapter warning if you don't use MySQL or PostgreSQL (default: false)
ignore_ey_config_warning: true # hide ey_config warning if you don't use it (default: false)
ignore_gemfile_lock_warning: true # hide warning when Gemfile is present but Gemfile.lock is missing. (default: false)
keep_releases: 3 # keep more or less releases (default: 3; Recommended: >= 2; MUST BE >= 1, with 1 being experimental)
keep_failed_releases: 3 # keep more or less failed releases (default: 3)
gc: false # if true, run repository garbage collection every deploy. (default: git will run gc as needed)
# Environment specific options apply only to a single environment and override settings in defaults.
environments:
env_production:
precompile_unchanged_assets: true # precompiles assets even if no changes would be detected (does not check for changes at all).
asset_strategy: shifting # choose an alternet asset management strategy (shifting, cleaning, private, shared)
asset_roles: :all # specify on which roles to compile assets (default: [:app, :app_master, :solo] - must be an Array)
env_staging
asset_strategy: private # Use an asset management that always refreshes, so staging enviroments don't get conflicts
These options in ey.yml will only work if the file is committed to your
application repository. Make sure to commit this file. Different branches
may also have different versions of this file if necessary. The ey.yml file
found in the deploying commit will be used for the current deploy.
If precompile_assets is not set, asset compilation will be detected and
failures may be ignored. Set precompile_assets to true or false to ensure
proper behavior.
When precopmile_assets is true, git diff will be used to detect changes to
the path names specified in asset_dependencies since the revision of the
last successful release. If precompile\_assets is true, be sure to git
ignore public/assets to avoid conflicts.
When precompile_unchanged_assets is true, assets will always be compiled
and the git diff detection will not run.
A number of asset persistence strategies are supported by default. Choose one and then customize using deploy hooks if necessary.
private - Precompile assets fresh every time. Shared assets are not symlinked
and assets stay with the release that compiled them. The assets of the previous
deploy are symlinked as into the current deploy to prevent errors during deploy.
When no assets changes are detected, the deploy uses rsync to copy the previous
release's assets into the current assets directory.
shared - Basic shared assets. Precompiled assets go into a single shared
assets directory. The assets directory is never cleaned, so a deploy hook should
be used to clean assets appropriately. When no assets changes are detected,
shared directory is only symlinked and precompile task is not run.
cleaning - Precompiled assets are shared across all deploys. Before compiling
the active deploying assets, all assets not referenced by the manifest.yml from
the previous deploy are removed. After cleaning, the new assets are compiled
over the top. The result is an assets dir that contains the last assets and the
current assets. When no assets changes are detected, shared directory is only
symlinked and cleaning and precompile tasks are not run.
shifting - The default behavior and the one used since the beginning of asset
support in engineyard-serverside. Assets are compiled into a fresh shared
directory. Previous shared assets are shifted to a last_assets directory to
prevent errors during deploy. When no assets changes are detected, the two
shared directories are symlinked into the active release without any changes.
All information that this gem needs to perform a deploy of an application is passed in on the command line. Command line interaction is performed through engineyard-serverside-adapter. Refer to the adapter gem or the source code here for details on the command line options.
The easiest way to run a serverside command manually is to run a normal deploy with the verbose option from the command line, then copy the engineyard-serverside command from the log and paste it into a terminal on the remote machine. Running manually should usually be unnecessary, but could be used to debug problems.
Install required gems:
which bundle >/dev/null || gem install bundler
bundle install
Running tests:
bundle exec rake
Bundler will take care of installing and running proper (older versions) of gems.
Bundler doesn't work on ruby 1.8.6-p287, which is what ey_resin provided
to older instances. To test engineyard-serverside under the same ruby, run:
gem build engineyard-serverside.gemspec
gem install --local --development --conservative ./engineyard-serverside-<VERSION>.gem
rake
Due to the nature of --development, that gem install command can take a VERY long time. If you get tired of waiting, you can manually install the indicated versions of rake and rspec. Check the gemspec for current requirements. At the time of this writing, rspec 1.3.0 was the last version known to work on 1.8.6.
Set the 'VERBOSE' environment variable to something to get full output from failing commands.
To release the engineyard-serverside gem, use the command below and then follow the instructions it outputs.
bundle exec rake release
This will remove the .pre from the current version, then bump the patch level and add .pre after. A git tag for the version will also be added.
New versions of engineyard-serverside will not be used by Cloud or the engineyard gem until upgraded gems have been pushed. Refer to the engineyard gem release instructions for more details.
The following 2 commands will install the current working copy on an instance:
bundle exec rake install_on[account/envname]
ey deploy --serverside-version VERSION -e envname -a appname -r branch-to-checkout --no-migrate -v
If you don't have an environment running on Engine Yard Cloud, you'll need to do a bit of hacking of both commands. You can look at the Rakefile to see how install_on works. It is simple to adapt it to installing on specified servers.
Next you'll have to run the deploy command manually on the instance. The easiest way to do that is to take an existing serverside command and modify it. An engineyard-serverside command can be extracted from a verbose log for another application's deploy, and then modified. The command looks like this:
bash -lc '/usr/local/ey_resin/ruby/bin/engineyard-serverside _2.1.0.rc1_ deploy --account-name account --app appname --config '\''{"input_ref":"testing","deployed_by":"Märtîn ☃ Èmdé"}'\'' --environment-name envname --framework-env production --instance-names ec2-255-255-255-255.compute-1.amazonaws.com:util --instance-roles ec2-255-255-255-255.compute-1.amazonaws.com:util localhost:solo --instances ec2-255-255-255-255.compute-1.amazonaws.com localhost --no-migrate --ref 5a6de57ca3ce3c51df18cfff0cbea87f2f07872a --repo git://github.com/engineyard/todo.git --stack nginx_passenger3 --verbose'
Run that from any primary web server instance and be sure to use "localhost" for the instance you're running on instead of its public address.
Obligatory Edit