ReleaseNotes.md

Release Notes

v2.8.6 (20230727)

[Bug Fixes]

• Ensure IRCoolixAC::toCommon() returns kNoTempValue when no sensor temp is detected. (#2015 #2012)
• Fix compilation dependency of LG on Samsung send protocol (#2011 #2010)
• Fix missing parameter in call to IRac::gree() (#2008 #2007)

[Features]

• IRac: Ensure the sleep parameter is used for the FUJITSU_AC protocol. (#1992 #1991)

[Misc]

• Allow the BlynkIRRemote.ino code to compile again. (#2016)
• do not list WHIRLPOOL_AC unconditionally as supported protocol (#2003)
• IRUtils:typeToString() — simplify (#2002)
• Fix brand Green -> Gree (#1994)
• Fix undefined std::round compilation error (#1989)

v2.8.5 (20230508)

[Bug Fixes]

• Fix a bug where we never detached the timer interrupt on ESP32s. (#1984 #1983)
• Missing argument in use of midea function (#1959 #1958)
• IRMQTTServer: Improve HA MQTT climate handling. (#1911)
• SEND_SANYO_AC88: Fix poor cut-n-paste error (#1905 #1897)

[Features]

• Add support for a 40bit variant of the standard Panasonic protocol (#1977 @1976)
• Initial support for York AC protocol (#1889)
• IRMQTTServer: SHT-3x Temperature Sensor Support (#1951)
• IRMQTTServer: HA multi output discovery (#1947)
• IRMQTTServer: extended with new A/C common fields (#1940)
• IRMQTTServer: Sync the on state to power from mode for HA (#1946)
• Experimental basic support for Carrier 84-bit protocol. (#1945 #1943)
• Add support the WowWee 11-Bit RoboRaptor-X protocol. (#1939 #1938)
• Added 'sensorTemperature' and 'iFeel' to IRac (common) (#1928)
• Added extra 'mid' option for Fan & SwingV to IRac (#1929)
• Added "commandType" to IRAc (#1921)
• Added support for Argo WREM-3 A/C remote protocol [part1] (#1920)
• Added Dutch (nl-NL) translation (#1907)
• ARGO: Improve code & add support for decoding 32bit sensor msgs. (#1906 #1859)
• Added support for Gorenje cooker hood IR protocol (#1888 #1887)

[Misc]

• Add Electrolux YKR-H/531E as a supported device (#1981 #1980)
• Update XMP status to Stable (#1944)
• upgrade to a later version of googletest (#1936)
• MITSUBISHI128: Added model to supported protocol (#1924)
• Added Dutch (nl-NL) README (#1908)
• Added GMock to UT Makefile (#1902)
• Update HA example config for HA 2022.6+ (#1901 #1900)
• Add a d1_mini_noMDNS build option to IRMQTTServer. (#1985)

v2.8.4 (20220918)

[Bug Fixes]

• [Bugfix] Handle gcc unsupported VA_OPT_ macro (#1880 #1881)

v2.8.3 (20220915)

[Bug Fixes]

• Fix #if for DECODE_COOLIX48 (#1796)
• Add missing prevs to decodeToState() (#1783)

[Features]

• Add pause() function to ESP32 when receiving. (#1871)
• ARGO: Argo add sendSensorTemp() (#1858 #1859)
• HAIER_AC160: Experimental detail support. (#1852 #1804)
• BOSCH144: Add IRac class support (#1841)
• Mitsubishi_AC: update left vane in IRac class (#1837)
• Basic support for Daikin 312bit/39byte A/C protocol. (#1836 #1829)
• Experimental basic support for Sanyo AC 152 bit protocol. (#1828 #1826)
• GREE: Add model support for YX1FSF/Soleus Air Windown A/C (#1823 #1821)
• Experimental basic support for Bosch 144bit protocol. (#1822 #1787)
• Experimental basic support for TCL AC 96 bit protocol. (#1820 #1810)
• Add basic support for clima-butler (52bit) RCS-SD43UWI (#1815 #1812)
• TOTO: An experimental (s)wipe at support for Toto Toilets. (#1811 #1806)
• CARRIER_AC128: Experimental Basic support for Carrier AC 128bit protocol. (#1798 #1797)
• HAIER_AC160: Add basic support for Haier 160bit protocol. (#1805 #1804)
• DAIKIN: Add basic support for 200-bit Daikin protocol. (#1803 #1802)
• FUJITSU: Improve handling of 10C Heat mode. (#1788 #1780)
• FUJITSU: Improve handling of short (command only) messages. (#1784 #1780)

[Misc]

• Improve the _IRREMOTEESP8266_VERSION_VAL macro (#1875 #1870)
• SONY: Update supported devices. (#1872)
• SAMSUNG: Update supported devices (#1873)
• NEC: Update supported devices (#1874)
• Give IRmacros.h smaller scope to avoid impacting projects using IRremoteESP8266 (#1857 #1853 #1851)
• Inhibit protocol names for not-included protocols (#1853 #1851)
• Test out codeql static analysis (#1842)
• Remove pylint disable=no-self-use (#1817)
• Fujitsu General: update supported devices (#1813)
• DAIKIN: Update supported devices (#1808 #1807)
• Fujitsu: Update supported remote info. (#1801 #1794)
• DAIKIN128: Update supported devices (#1754)
• Voltas: Add link to manual for 122LZF A/C. (#1800 #1799 #1238)
• Daikin128: Additional unit test. (#1795 #1754)
• MIDEA: Update supported devices (#1791 #1790)

v2.8.2 (20220314)

[Bug Fixes]

• ESP32-C3: Fix reboot/crashes on ESP32-C3s when receiving. (#1768 #1751)

[Features]

• HITACHI_AC296: Add IRac class support & tests. (#1776 #1758 #1757)
• Support for Hitachi RAS-70YHA3 (remote RAR-3U3) (#1758 #1757)
• LG: Add Swing Toggle support for Model LG6711A20083V (#1771 #1770)
• IRMQTTServer: add MQTT_SERVER_AUTODETECT_ENABLE via mqtt mDNS (#1769)
• Experimental basic support for Kelon 168 bit / 21 byte protocol. (#1747 #1745 #1744)
• MitsubishiAC: Tweak repeat gap timing. (#1760 #1759)
• Gree YAP0F8 (Detected as Kelvinator) vertical position set support (#1756)
• Make KELON (48 bit) protocol decoding stricter. (#1746 #1744)
• IRMQTTServer V1.6.1 (#1740 #1739 #1729)
• HITACHI_AC264: Add minimal detailed support. (#1735 #1729)
• LG2: Improve Light toggle msg handling. (#1738 #1737)
• MIDEA: Add support for Quiet, Clean & Freeze Protect controls. (#1734 #1733)
• Add basic support for HITACHI_AC264 264bit protocol. (#1730 #1729)
• ESP32-C3: Work around for some C3 specific compiler issues again. (#1732 #1695)

[Misc]

• MIDEA: Update supported devices (#1774 #1773 #1716)
• Update devices supported by ELECTRA_AC (#1766 #1765)
• Improve documentation for encodePioneer() (#1761 #1749)
• Update (un)supported DAIKIN128 devices. (#1752)
• Refactor decodeCOOLIX() code & add another test case. (#1750 #1748)
• Simplify code based on state_t being initialised by default. (#1736 #1699)
• Add comments to help Teknopoint users. (#1731 #1728)
• Fix library version string calculation. (#1727 #1725)
• Confirm we can reproduce TurnOnFujitsuAC.ino via IRac/IRMQTTServer. (#1726 #1701)

v2.8.1 (20220101)

[Bug Fixes]

• Arduino ESP32 Core v2.0.2+ crashes due to our timer hack. (#1715 #1713)
• SONY: Fix old Sony CD-Player Remote (12 Bit) (#1714)

[Features]

• Add tool to convert protocol & code to raw timing info. (#1708 #1707 #1703)
• Add basic support for COOLIX48 protocol. (#1697 #1694)
• MITSUBISHI_AC: Added support for i-SAVE mode. (#1666)
• TOSHIBA_AC: Add Filter setting support. aka. Pure. (#1693 #1692)
• Airton: Add detailed A/C support. (#1688 #1670)

[Misc]

• Add a structured library version number. (#1717)
• Workflows Split UnitTests (#1712)
• Reduce time for workflow/Build (#1709)
• Fix some compiler & linter warnings (#1699 #1700)
• Fujitsu: Update supported A/C models (#1690 #1689 #1702 #1701)
• Remove extra const qualifier for char pointer (#1704)
• TCL: Update supported devices. (#1698)
• ESP32-C3: Work around for some C3 specific compiler issues. (#1696 #1695)

v2.8.0 (20211119)

[Bug Fixes]

• Fix compilation issue when using old 8266 Arduino Frameworks. (#1639 #1640)
• Fix potential security issue with scrape_supported_devices.py (#1616 #1619)

[Features]

• SAMSUNG_AC
  • Change clean setting to a toggle. (#1676 #1677)
  • Highest fan speed is available without Powerful setting. (#1675 #1678)
  • Change beep setting to a toggle. (#1669 #1671)
  • Fix Beep for AR12TXEAAWKNEU (#1668 #1669)
  • Add support for Horizontal Swing & Econo (#1277 #1667)
  • Add support for On, Off, & Sleep Timers (#1277 #1662)
  • Fix power control. Clean-up code & bitmaps from Checksum changes. (#1277 #1648 #1650)
• HAIER_AC176/HAIER_AC_YRW02
  • Add support A/B unit setting (#1672)
  • Add support degree Fahrenheit (#1659)
  • Add support Lock function (#1652)
  • Implement horizontal swing feature (#1641)
  • Implement Quiet setting. (#1634 #1635)
• Basic support for Airton Protocol (#1670 #1681)
• HAIER_AC176: Add Turbo and Quiet settings (#1634)
• Gree: Add SwingH & Econo control. (#1587 #1653)
• MIRAGE
  • Add experimental detailed support. (#1573 #1615)
  • Experimental detailed support for KKG29A-C1 remote. (#1573 #1660)
• ELECTRA_AC: Add support for "IFeel" & Sensor settings. (#1644 #1645)
• Add Russian translation (#1649)
• Add Swedish translation (#1627)
• Reduce flash space used. (#1633)
• Strings finally in Flash! (#1493 #1614 #1623)
• Add support for Rhoss Idrowall MPCV 20-30-35-40 A/C protocol (#1630)
• Make IRAc::opmodeToString() output nicer for humans. (#1613)
• TCL112AC/TEKNOPOINT: Add support for GZ055BE1 model (#1486 #1602)
• Support for Arris protocol. (#1598)
• SharpAc: Allow position control of SwingV (#1590 #1594)

[Misc]

• HAIER_AC176/HAIER_AC_YRW02
  • Replace some magic numbers with constants (#1679)
  • Small fix Quiet and Turbo test (#1674)
  • Fix IRHaierAC176::getTemp() return value description (#1663)
• Security Policy creation and changes. (#1616 #1617 #1618 #1621 #1680)
• IRrecvDumpV2/3: Update PlatformIO envs for missing languages (#1661)
• IRMQTTServer
  • Use the correct string for Fan mode in Home Assistant. (#1610 #1657)
  • Move a lot of the strings/text to flash. (#1638)
• Minor code style improvements. (#1656)
• Update Supported Devices
  • HAIER_AC176 (#1673)
  • LG A/C (#1651 #1655)
  • Symphony (#1603 #1605)
  • Epson (#1574 #1601)
  • GREE (#1587 #1588)
  • SharpAc (#1590 #1591)
• Add extra tests for LG2 protocol (#1654)
• Fix parameter expansion in several macros.
• Move some strings to IRtext.cpp & locale/default.h (#1637)
• RHOSS: Move include and defines to their correct places (#1636)
• Make makefile only build required files when running run-% target (#1632)
• Update Portuguese translation (#1628)
• Add possibility to run specific test case (#1625)
• Change googletest library ignore (#1626)
• Re-work "Fan Only" strings & matching. (#1610)
• Address C0209 pylint warnings. (#1608)

v2.7.20 (20210828)

[Bug Fixes]

• Make strToSwingH() match "Right Max" (#1550 #1551)

[Features]

• Experimental Bose remote support (#1579)
• Added MitsubishiAC VaneLeft (#1572 #1576)
• HAIER_AC176: Add experimental detailed support (#1480 #1571)
• Detailed support for Tornado/Sanyo 88-bit A/C protocol (#1503 #1568)
• Add support for new TROTEC_3550 A/C protocol (#1563 #1566 #1507)
• SamsungAc: Use sendExtended() going forward. (#1484 #1562)
• SamsungAc: Redo/fix checksum calculations. (#1538 #1554)
• LG: Add support for AKB73757604 model (#1531 #1545)
• Daikin176: Add support for Unit Id. (#1543 #1544)
• Daikin2: Add support for Humidity setting/operation. (#1535 #1540)
• TCL112AC: Add support for quiet/mute setting. (#1528 #1529)
• LG2: Add Fan speed, Swing, & Light support for new AKB74955603 model (#1513 #1530)
• Add Mitsubishi AC "fan only" mode (#1527)

[Misc]

• Change when some github workflows run (#1583)
• Add/update supported device info (#1580 #1581 #1585)
• Fix pylint issues due to pylint update. (#1569 #1570)
• DAIKIN216: Update supported models. (#1552 #1567)
• IRMQTTServer: Build a minimal OTA image via PlatformIO. (#1513 #1541)
• Reduce memory fragmentation cause by String usage. (#1493 #1536)
• Refactor decodeMitsubishiAC() (#1523 #1532)
• Fix incorrect comment.
• Migrate from Travis to GitHub Actions (#1522 #1526)
• Documentation update with additional supported Panasonic AC models (#1525)

v2.7.19 (20210706)

[Bug Fixes]

• Illegal Heap write in rawbuf when the capture has overflowed. (#1516 #1517)
• PANASONIC_AC: Fix Low and High fan speeds (#1515)
• Fix MDNS in IRServer and IRMQTTServer example code (#1498 #1499)
• IRac: Fix off-by-one error in Coolix's sleep setting. (#1500)
• Fix undefined constant (#1490)

[Features]

• Add detailed support for Kelon ACs (#1494)
• Experimental basic support for Teknopoint A/C protocol (#1486 #1504)
• Daikin64: Add support for Heat mode (#1492)
• Basic support for HAIER_AC176 176 bit protocol. (#1480 #1481)

[Misc]

• GREE: Update inter-message gap timing (#1508 #1509)
• IRac: Change Coolix to send special messages after a normal message. (#1501 #1502)
• Fix compiler warnings causing Travis failures. (#1491)
• Update supported model info (#1477 #1485 #1488 #1489)
• Add HTML viewport meta tag to IRServer and IRMQTTServer examples (#1467 #1469)

v2.7.18 (20210420)

[Misc]

• Attempt to fix issues with installing the library under the Arduino IDE on Win10 & OSX (#1451 #1464)
• Reduce the library's github zip download size. (#1451 #1463)
• An experiment in using Github Actions to do some of the CI work. (#1462)

v2.7.17 (20210418)

[News]

• The library now supports 100 IR protocols! \o/

[Bug Fixes]

• Fix IRAcUtils::decodeToState() for different length Samsung msgs (#1447 #1448)

[Features]

• Fujitsu: Add support for ARREW4E model. (#1455 #1456)
• Experimental detailed support for Truma A/Cs. (#1440 #1449)

[Misc]

• Fix Arduino library linter issues. (#1451 #1452 #1453 #1460)
• Reduce the library's zip download size. (#1451 #1463)
• An experiment in using Github Actions to do some of the CI work. (#1462)

v2.7.16 (20210324)

[Features]

• ToshibaAC: Swing handling and setRaw() improvements. (#1423 #1424 #1425)
• Support for XMP (Xfinity) protocol. (#1414 #1422)
• ToshibaAC: Adjust inter-message gap timing to improve matching. (#1420 #1421)
• Ecoclim: Add detailed A/C support (#1397 #1415)

[Misc]

• [ESP32] Fix addApbChangeCallback(): duplicate func kernel msgs (#1434 #1435)
• refactor ir_Fujitsu (#1419)
• refactor ir_Whirlpool (#1416)
• refactor ir_Vestel (#1413)
• refactor ir_Trotec (#1412)

v2.7.15 (20210213)

[BREAKING CHANGES]

• Some Daikin2 constants have been changed. (#1393)

[Features]

• Experimental basic support for EcoClim 56 & 15 bit protocols. (#1397 #1410)
• MITSUBISHI_AC: Add support for enabling Weekly Timer. (#1403 #1404)
• Mitsubishi ACs: Improve handling swing/vane settings. (#1399 #1401)
• MITSUBISHI_AC: Add support for half degrees. (#1398 #1400)
• Add irutils::addSwing[V|H]ToString() and adjust some constants (#1365 #1393)
• SharpAc: Add support for model A903, and improve IRac fan & power control. (#1387 #1390)
• Experimental support for Milestag2 (#1360 #1380)

[Misc]

• Improve IRac::sendAc() documentation. (#1408 #1409)
• refactor ir_Transcold (#1407)
• refactor ir_Toshiba (#1395)
• Fix Travis-CI build issues. (#1396)
• refactor ir_Teco (#1392)
• Fujitsu A/C: Add warning/suggestions for AR-RAH1U devices (#1376 #1386)
• refactor ir_Technibel (#1385)
• Add the new logo and banner 🎉 (#1371 #1372)
• Update references to sbprojects website. (#1381 #1383)
• refactor ir_Tcl (#1379)

v2.7.14 (20210103)

[Bug Fixes]

• SanyoAc: Fix Sensor Location error (#1359)
• IRMQTTServer: Compiler error under PlatformIO on Windows. (#1353 #1354)
• Workaround for ESP32 hw timer library calls not in IRAM. (#1350 #1351)

[Features]

• PANASONIC_AC32: Add limited detailed support. (#1364 #1366)
• Move global vars in IRrecv into a namespace. (#1350 #1352)
• Fujitsu: Handle toggles of Econo & Turbo when IRac interface is used. (#1334 #1345)

[Misc]

• Elitescreens: Update supported brands/models (#1375)
• refactor ir_Sharp (#1374)
• refactor ir_Sanyo (#1359)
• Gree: List Amana as supported. (#1361 #1363)
• Lasertag: Increase matching tolerance. (#1360 #1362)
• refactor ir_Samsung (#1358)
• refactor ir_Neoclima (#1349)
• Update issue templates (#1348 #1355)
• Midea: Update supported devices & add notes for an odd Pioneer System. (#1342 #1344)
• Kelvinator: Update supported models. (#1335 #1346)

v2.7.13 (20201125)

[Bug Fixes]

• Fix crash when IRac::sendAc(state_t, *state_t) called with SAMSUNG_AC & NULL (#1341 #1339)
• Mitsubishi112 & 136: setSwingV() incorrectly sets mode. (#1337)
• Typo preventing RC6 from compiling when other protocols disabled. (#1332 #1331)

[Features]

• Coolix: Improve Sensor(ZoneFollow) and add Vane Step support. (#1340 #1318)

[Misc]

• refactor ir_Coolix (#1340)
• refactor ir_Mitsubishi (#1336)
• refactor ir_MitsubishiHeavy (#1333)

v2.7.12 (20201113)

[Bug Fixes]

• defaultBits() returned incorrect result for PANASONIC_AC (#1307 #1314)
• Fix LG2 timings and refactor decodeLG() (#1298 #1304)

[Features]

• Midea: Add support for "Follow Me"/Sensor, Turbo, Light, & Timers (#1318 #1327)
• SharpAc: Add model support for A705 (#1309 #1313)
• Add basic support for Panasonic A/C 32bit/16bit protocol. (#1307 #1316)
• Add support for Elite Screens protocol. (#1306 #1310)
• IRrecvDumpV2+: Add tolerance setting. (#1292)
• Add basic support for the Mirage Protocol. (#1289 #1291)
• Internationalisation Support
  • pt-BR: Add Portuguese/Brazilian support. (#1303)
  • de-DE: Backfill missing strings (#1294)
  • de-DE: update for recent addition of 'tolerance' (#1293)
  • de-DE: Translate root README.md into German (#1297)

[Misc]

• refactor ir_LG (#1325)
• refactor ir_Kelvinator (#1317)
• refactor ir_Hitachi (#1308)
• refactor ir_Goodweather (#1295)
• refactor ir_Electra (#1290)
• refactor ir_Daikin (#1288)
• Update Kaysun supported models. (#1322)
• fix typos/spelling mistakes (#1301)
• Add some missing Doxygen class/data-type descriptions. (#1287)

v2.7.11 (20201002)

[Features]

• Transcold: Add detailed support. (#1256 #1278)
• Airwell/Whirlpool: Add handling of previous state to .toCommon() (#1275 #1276)
• IRMQTTServer: Change how MQTT packet/buffer size is set. (#1271)
• Fujitsu: Add support for timers. (#1255 #1261 #1262)
• Neoclima: Add Economy & Fahrenheit support (#1260 #1265)
• Technibel: Cleanup and code fixes/improvements. (#1259 #1266)
• Technibel: Add detailed A/C support (#1259)
• Transcold: Add basic support. (#1256 #1258)

[Misc]

• refactor ir_Delonghi (#1285)
• Whirlpool: Change default mode in convertMode() (#1283 #1284)
• SamsungAC: Unit tests to help debug poor signal (#1277 #1280)
• Add question & note about VS1838b use to issue template. (#1281)
• rewrite ir_Corona (#1274)
• tools/mkkeywords: Fix minor parsing issue. (#1272)
• Add Zhongxian Li to Contributers.md (#1270)
• rewrite Carrier (#1269)
• rewrite ir_Argo by using bit field (#1264)
• rewrite ir_Amcor by using bit field (#1263)
• Update Fujitsu supported model info.
• Clarify the scope of the LittleFS breaking change.

v2.7.10 (20200831)

[BREAKING CHANGES]

• IRMQTTServer & Web-AC-Control: move SPIFFS to LittleFS for ESP8266 (#1182 #1226)
• Daikin176: Change & increase operating mode values. (#1233 #1235)

[Bug Fixes]

• TOSHIBA_AC: not turning off when using IRac class. (#1250 #1251)
• Haier: change position of Fan speed bits. (#1246 #1247)

[Features]

• Voltas: Add detailed support for Voltas A/Cs (#1238 #1248)
• Add support for Metz protocol. (#1241 #1242)
• Basic support for Voltas A/C protocol (#1238 #1243)
• Add low level bit formatting sanity checks. (#1232)

[Misc]

• Rewrite Airwell by using bit fields (#1254)
• Rewrite Haier YRW02 using bit fields (#1253)
• rewrite Haier HSU07-HEA03 (#1246 #1247)
• rewrite ir_Gree & ir_Midea by using bit field (#1240)
• Incorrect usage of assert() (#1244 #1245 #1232)
• rewrite Gree (#1210)

v2.7.9 (20200730)

[Bug Fixes]

• Fix mistake in IRLGAc::convertFan(). (#1214 #1215)

[Features]

• Add Sanyo A/C (72 bit) protocol with detailed support. (#1211 #1218)
• Added modification to Midea unit to support Danby DAC AC units. (#1213)
• ToshibaAc: Rework to support Carrier models and add more settings. (#1205 #1212)
• Add detailed support for Airwell A/C protocol. (#1202 #1204)

[Misc]

• Pioneer: Update timings based on user collected data. (#1220 #1222)
• Samsung36: Adjust timings & update unit tests. (#1220 #1221)
• Consolidate common code: Inverted byte pairs (#1219)
• Remove duplicate code from IRToshibaAC::calcChecksum() (#1207)
• Update missing/incorrect doxygen comments (#1203)

v2.7.8 (20200622)

[BREAKING CHANGES]

• Fix Manchester code handling; Increase Airwell to 34 bits. (#1200)

[Bug Fixes]

• Carrier40: Use correct gap value. (#1193)

[Features]

• CarrierAc64: Add detailed support. (#1133)
• Add experimental support for Hitachi A/C 344 bit protocol (#1139)
• Automatic & full library code/API documentation via Doxygen (#1150 #1154 #1155 #1156 #1158 #1165 #1167 #1169 #1180 #1184 #1189 #1191 #1194 #1195 #1197 #1198)
• Hitachi344: Add detailed support and change bit ordering. (#1147)
• Add Corona AC Protocol (#1152)
• Hitachi344: Add Swing(H) and improve Swing(V) (#1148)
• Update auto_analyse_raw_data.py with better code comment sections (#1164)
• Add support for Midea24 protocol. (#1171)
• Add basic Zepeal protocol support (#1178)

[Misc]

• scrape_supported_devices.py: avoid changes to SupportedProtocols.md (#1140)
• auto_analyze nice exit on empty rawdata input (#1141)
• Comments update + cleanup (#1143)
• Update D_STR_IRRECVDUMP_STARTUP text and comments. (#1144)
• Minor code cleanups (#1149)
• Update README.md's to point to new API docs. (#1151)
• Update "Supports" sections (#1160)
• Add a doxygen check to CI/Travis. (#1161)
• scrape_supported_devices: warn about misplaced or legacy supports sections (#1159)
• Add Supports sections to some files (#1163 #1166)
• Fix compile error when DEBUG is enabled.
• Add no-output option and return code on error to scrape_supported_devices
• Travis: Add scrape_supported_devices error check
• Update auto_analyse_raw_data.py to have a default Supports: section
• Treat compiler warnings as errors. (#1174)
• Remove calcLGChecksum() and use new generic sumNibbles() (#1175)
• Suppress more potential compiler warnings. (#1179)
• Load balance travis tasks to reduce wall clock time. (#1183)
• Set PlatformIO's default baudrate to 115200 (#1188)
• Some fixes to Doshisha protocol handler
• Minor cleanups of Corona and Zepeal
• Enable Doxygen warning when the parameters for a function/method/procedure are wrong/missing. (#1196)

v2.7.7 (20200519)

[BREAKING CHANGES]

• Fix Symphony protocol. (#1107, #1105)
  • Now 12 bits and bits are inverted. All previous codes will no longer work.
• IRMQTTServer: Better handle power & mode operations for Home Assistant. (#1099, #1092)
  • When MQTT_CLIMATE_HA_MODE is enabled (default) this will break previous operation mode resumption when power is changed.

[Bug Fixes]

• Set correct return type for .calibrate() (#1095, #1093)

[Features]

• Add basic support for Carrier 40 & 64 bit protocols. (#1125, #1112, #1127)
• Gree: Enable native support for Fahrenheit (#1124, #1121)
• Gree: Add option to control display temp source. (#1120, #1118)
• Add support for Multibrackets protocol. (#1106, #1103)
• Add RawToPronto.py tool & improve sendPronto() precision (#1104, #1103)
• Add support for Doshisha LED light protocol (#1115)
• Introduce IRrecvDumpV3 with basic OTA update support (#1111)
• Add detailed support for Delonghi A/C (#1098, #1096)
• Improved support for SharpAc. (#1094, #1091)
• Update auto_analyse to use new decode call structure. (#1102, #1097)
• Added Blynk app example (#1090)

[Misc]

• update auto_analyse script to use new param documentation (#1126)
• Improve raw_to_pronto_code.py (#1122, #1103)
• Use pattern rules in Makefiles to reduce specific rule (#1110)
• Update list of supported Daikin models. (#1101)

v2.7.6 (20200425)

[Features]

• IRMQTTServer: Use more i18n text. (#1086)
• Convert Protocol names to shared text. Saves ~3k of flash. (#1078)
• Add Chinese translation (zh-CN) & add utf-8 support. (#1080, #1085)

[Misc]

• IRMQTTServer: Ensure MQTT_MAX_PACKET_SIZE is correctly set. (#1084)
• Add Italian locale to IRrecvDumpV2 platformio file.

v2.7.5 (20200409)

[Features]

• Detailed support for HITACHI_AC1 protocol. (#1056, #1061, #1072)
• update sharp to match Sharp AH-A5SAY (#1074)
• Experimental support for AIRWELL protocol. (#1069, #1070)
• SamsungAC: Add Breeze (Aka WindFree) control (#1062, #1071)
• Support for Daikin FFN-C A/C (#1064, #1065)
• Add basic support for HITACHI_AC3 protocol. (#1060, #1063)
• Add support for SYMPHONY 11 bit protocol. (#1057, #1058)
• IRMQTTServer: Improve Home-Assistant discovery by sending a 'device' with the discovery packet (#1055)

[Misc]

• Clean up support status of various protocols.
• Add decodeToState() unit tests to all supported protocols (#1067, #1068)
• Add Gree AC example code. (#1066)

v2.7.4 (20200226)

[Bug Fixes]

• IRMQTTServer: Fix bug when receiving an IR A/C message and not re-transmitting it. (#1035, #1038)
• Coolix: setRaw() doesn't update power state. (#1040, #1041)

[Features]

• Electra: Add improved feature support. (#1033, #1051)
• Add support for Epson protocol. (#1034, #1050)
• Add options to decode() to aid detection. Improve NEC detection. (#1042, #1046)
• SamsungAc: Add support for Light & Ion (VirusDoctor). (#1045, #1048, #1049)
• Add Italian (it-IT) locale/language support. (#1047) (kudos @egueli)
• gc_decode: Add repeat support for pronto codes. (#1034, #1043)

[Misc]

• Update supported SamsungAc devices (#1045)
• Coolix: Subtle protocol timing adjustments (#1036, #1037)
• Add supported Electra device model info (#1033)

v2.7.3 (20200130)

[Features]

• Allow protocols to be enabled or disabled with compiler flags. (#1013, #1012)
• Panasonic AC: Add Ion Filter support for DKE models. (#1025, #1024)
• Add support for sending Sony at 38Khz (#1029, #1018, #1019)
• auto_analyse_raw_data.py: Handle analysing messages with no headers. (#1017)

[Misc]

• Fix Coolix unit test errors when using Apple c++ compiler. (#1030, #1028)
• Fix Apple clang c++ compiler error in unit tests. (#1027, #1026)
• Improve/fix scraping of supported devices (#1022)
• Panasonic PKR series A/C uses DKE protocol. (#1020, #1021)
• Update NEC supported devices. (#1018)
• Add note to avoid GPIO16 on the ESP8266 for receiving. (#1016, #1015)

v2.7.2 (20200106)

[Bug Fixes]

• Common AC api: Better handle protocols with power toggles. (#1002)

[Features]

• Experimental detailed support for LG a/c. (#1008 #1009)

[Misc]

• Add remote codes for Aloka LED lamp. (#1005)
• Improve Supported Devices scraping. (#1006)

v2.7.1 (20191125)

[Bug Fixes]

• Hitachi424Ac: Fix Incorrect Power Byte Values (#987)
• Coolix: Fix setPower(false) issue. (#990)

[Features]

• Use char* instead of String for common text. Saves ~1-3k. (#992, #989)
• Hitachi424Ac: Add Vertical Swing ability (#986)

[Misc]

• IRMQTTServer: Update HA example/discovery message. (#995)
• Move newly added common text to a better location. (#993)

v2.7.0 (20191030)

[Bug Fixes]

• auto_analyse: Fix > 64 bit send code generation. (#976)
• auto_analyse: Fix missing arguments in generated code for send64+ (#972)
• IRsendProntoDemo: Fix compile issue on ESP32 platform. (#938)
• IRMQTTServer: Fix compile error when MQTT_ENABLE is false. (#933)

[Features]

• Add Hitachi 424 bit A/C support. (#975, #980, #981)
• Experimental detailed support for DAIKIN152 (#971)
• Mitsubishi 112bit A/C support (#947, #968)
• gc_decode: Adding Support for Decoding codes in raw code format (#963)
• Refactor to use common routines/macros to handle bit manipulation. (#934)
• Use centralised common strings. Saves ~1.5k of program space. (#946)
• Add Internationalisation (i18n) / Locale support. (#946, #955, #966)
  • de-CH: Swiss German. (#949, #954)
  • de-DE: German. (#946, #950, #952)
  • en-AU: English/Australia (Default locale) (#946)
  • en-IE: English/Ireland (#946)
  • en-UK: English/United Kingdom (#946)
  • en-US: English/United States (#946)
  • es-ES: Spanish. (#953)
  • fr-FR: French. (#962)
• Port CI pipeline to PlatformIO (#936)

[Misc]

• Add DAIKIN128 & DAIKIN152 to decodeToState() (#982)
• auto_analyse: Produce better code when leader is detected. (#977)
• Coolix A/C improvements (#944)
• A/C setRaw/getRaw/stateReset() cleanup. (#967)
• Add documentation on how to use & support the i18n aspects of the library.
• Make travis checks faster. (#957)
• Translate README.md to french (#959)
• Fixed Coolix kCoolixDefaultState (#941)
• Improve generation of list of pio projects. (#940)

v2.6.6 (20190923)

[Bug Fixes]

• Ensure begin() is called for every supported common a/c. (#905, #899)
• IRMQTTServer: Fix JSON state parsing. (#896)
• IRMQTTServer: Fix compilation error when MQTT_CLIMATE_JSON is true. (#893)

[Features]

• Mitsubishi136: Full A/C support. (#898, #890)
• Fujitsu: Add support for ARRY4 remote. (#895)
• Web-AC-control: Add new WebUI example sketch. (#880, #886)
• Improve Common A/C API (#913)
• IRMQTTServer: Support for multiple climates. (#903)
• IRMQTTServer: Add TX channel support for HTTP interface. (#929)
• IRMQTTServer: Add option to clear retained settings. (#917)
• auto_analyse_raw_data.py: Add decode code generation. (#909)
• auto_analyse_raw_data.py: General improvements (#906)

[Misc]

• IRMQTTServer: Use latest API for common A/C. (#928)
• IRMQTTServer: Add flag & documentation for Home Assistant mode. (#919)
• IRMQTTServer: Move from ArduinoJson v5 to v6. (#878)
• IRMQTTServer: Use retain for discovery message. (#881)
• Goodweather: Adjust timings & minor fixes. (#924)
• PanasonicAc: Add better SwingV support for common a/c framework. (#923)
• Daikin2: Corrections for common A/C interface. (#910)
• MitsubishiAC: Improve decoding. (#914)
• Fujitsu: Disable horiz swing for ARRY4. (#907)
• SamsungAc: Only send power on/off code if it's needed. (#884)
• Teco: Add timer support. (#883)
• More consistent A/C ::toString() output. (#920)

v2.6.5 (20190828)

[Bug Fixes]

• IRMQTTServer: Remove duplicate MQTT_CLIMATE from HA discovery (#869)
• Fujitsu: Ensure on() is called in common a/c framework. (#862)
• Update strToModel() (#861)
• IRMQTTServer: Add missing header file. (#858)
• IRMQTTServer: Fix a compile error when HTML_PASSWORD_ENABLE is enabled. (#856)

[Features]

• IRrecv: Allow tolerance percentage to be set at run-time. (#865)
• Basic support for Daikin152 A/C protocol. (#874)
• Teco: Add light, humid, & save support. (#871)
• Detailed support for Amcor A/C protocol. (#836, #854)
• IRMQTTServer: Add ability to report Vcc at the ESP chip. (#845)
• Gree: Add timer support. (#849)
• IRac/Mitsubishi A/C: Support wide swingh_t mode (#844)
• IRMQTTServer: Generate protocol and bit size html selects (#838)

[Misc]

• New example code to show how to use the IRac class to control A/Cs (#839)
• Improve/fix swingh_t::kWide support (#846)
• Kelvinator: Optimise code a little to save space. (#843)

v2.6.4 (20190726)

[Bug Fixes]

• Fix some swing problems with the Mitsubishi HAVC protocol (#831)
• Fix parameter ordering for Gree in common a/c code. (#815)
• Fix parameters for Coolix in IRac::sendAc() (#829)
• IRMQTTServer: Fix sending >64 bit codes. (#811)

[Features]

• Daikin128: Full detailed support & common a/c support. (#832)
• Midea: Support native temp units of Celsius & SwingV. (#823)
• Gree: Support YBOFB models and bug fix. (#815)
• Pioneer: Fix sendPioneer with Pioneer specific timings (#830)
• Daikin128: Initial support for Daikin 17 Series/BRC52B63 (#828)
• Coolix: Better toCommon() support. (#825)
• Experimental detailed support for Daikin 176 bits (#816)
• Add setting of output options to A/C classes. (#808)
• Add invert flag support to Samsung AC (#807)

[Misc]

• Daikin176: making some change on Daikin176 to work with IRMQTTServer (#826)
• Reduce duplicate code to save (3K+) space. (#813)
• Daikin176: Experiment Daikin176bits with IRMQTTServer (#824)
• Update platformio.ini files for PlatformIO v4.0.0 (#812)
• Change repo URLs to new location. (#806)
• Move htmlEscape() to the IRutils namespace (#801)

v2.6.3 (20190704)

[Bug Fixes]

• IRMQTTServer: REPLAY_DECODED_AC_MESSAGE not working. (#784, #797)
• ESP32: Ensure IRrecv's GPIO is set to input mode. (#774)

[Features]

• IRMQTTServer: Show available sketch space for OTA uploads. (#795)
• Experimental detailed support for Electra/AUX protocol (#788)
• IRMQTTServer: Ability to resend existing climate state via MQTT & HTTP (#784)
• Daikin160: Add detailed & common a/c support. (#777)
• Experimental detailed support for Neoclima protocol. (#767)
• Gree: add WiFi and IFeel bits (#770)
• Handle A/Cs with toggles better. (#758)
• IRMQTTServer: Allow sending/receiving climate via JSON over MQTT. (#763)

[Misc]

• Move converting of IR A/C messages out of example code. (#798)
• Reduce example code size and complexity (#790)
• Change ControlSamsungAC example to not use sendExtended() (#792)
• IRMQTTServer: Add MQTT_CLIMATE_IR_SEND_ON_RESTART compile-time flag. (#784)
• Refactor A/C's toString()'s to reduce code size. Saves ~3.5k (#782)
• Add sanity tests for unexpected conditions in IRrecv. (#773)
• IRMQTTServer: Fixed the HA config documentation (missing '-') (#776)
• Improve mkkeywords tool. (#766)
• Refactor with generic decode routines in IRrecv class. Saves ~7k. (#765)

v2.6.2 (20190616)

[Features]

• Initial support for the ESP32 architecture & boards. (#742)
• Add changable GPIO settings to IRMQTTServer. (#730)
• IRMQTTServer: Enforce a repeat for all Coolix calls (#752)
• Basic DAIKIN 160bit send and decode. (#754)
• Add example code for a Smart(er) IR Repeater. (#740)
• Enforce Samsung A/C Quiet & Powerful mutual exclusivity.

[Misc]

• IRMQTTServer: Add some memory alloc safety checks. (#749)
• Move some ToString() functions to IRac.cpp (#748)
• Increase tolerance value for TCL112AC protocol. (#745)
• Fix compiler warning in IRutils_test.cpp (#756)
• Scrape Supported Protocols and generate SupportedProtocols.md (#755)
• Make supported device info more organised. (#753)

v2.6.1 (20190609)

[Breaking Changes]

• Major rework/breaking changes to Argo A/C support. (#705)

[Bug Fixes]

• Correct set/getQuiet for Samsung A/C (#736)
• Add missing on/off() to IRCoolixAC class. (#725)
• Daikin set/getEye() uses wrong bit. (#711)
• IRMQTTServer: Continue to use same Temperature units. (#710)
• Fixed a bug with setMode()/getMode() for HAIER_AC. (#705)

[Features]

• Add set/getPowerful for Samsung A/C (#736)
• Add calibrate() to all the A/C classes. (#735)
• IRMQTTServer: Add sequencing for sending MQTT IR commands. (#723)
• Add support for Fujitsu AR-REB1E & AR-JW2 remotes. (#718)
• Add Beta decodeTrotec() support. (#719)
• Add experimental decodeArgo() support. (#717)
• Support for Goodweather A/Cs. (#715)
• Add DISABLE_CAPTURE_WHILE_TRANSMITTING feature to IRMQTTServer. (#713)
• Support for Lixil Inax Toilet protocol. (#712)
• Add set/getWeeklyTimerEnable() to Daikin (#711)
• IRMQTTServer: Update Common A/C settings based on received IR messages. (#705)
• Add day of week to DAIKIN protocol (#699)
• Add limited support for Sharp A/C (#696)
• SAMSUNG_AC: Make sure special power mode messages are sent. (#695)
• Add set/getPowerful() (turbo) to DAIKIN216 (#693)

[Misc]

• Add kPeriodOffset for CPU Freq of 160MHz. (#729)
• Example code for a Dumb IR repeater. (#737)
• Update swing handling for Fujitsu A/Cs. (#724)
• Add function to convert decode_results to sendRaw() array. (#721)
• Attempt to reduce heap fragmentation from strings. (#707)
• Update Fujitsu A/C example code to safer settings (#716)
• Enforce better const usage in IRUtils. (#708)
• Attempt to reduce heap fragmentation by A/C toString()s. (#694)
• Minor changes to DAIKIN216 timings and features. (#693)

v2.6.0 (20190430)

[Bug Fixes]

• Fixed problem where LG protocol used wrong duty cycle for repeat. (#687)
• Fix checksum calculation for Daikin protocols. (#678)
• Fix the byte array version of sendGree() (#684, #685)
• Fix artificial vs. real state creation on HaierAC. (#668, #671)
• Fix issues caused by having MQTT_ENABLE set to false. (#677)
• Fix compile problem when DEBUG is defined. (#673, #674)
• Fix Minor bug with MQTT_ENABLE False condition (#654)

[Features]

• Experimental support for DAIKIN216 (ARC433B69) (#690)
• Experimental support for Mitsubishi Heavy Industries A/Cs. (#660, #665, #667)
• Support more features of TCL A/C (#656)
• Add LEGO(TM) Power Functions IR protocol. (#655)
• Add Panasonic AC RKR model & Example (#649)
• DAIKIN/IRDaikinESP overhaul and add Comfort mode support. (#678) WARNING: Previous sendDaikin() calls may not work. Please recapture codes or use kDaikinStateLengthShort for nbytes in those calls.
• IRMQTTServer: Move MQTT server and other parameters to WifiManager. (#680) WARNING: Previous users may need to fully wipe/reset the SPIFFS/WifiManager settings by visiting http://<your_esp8266's_ip_address>/reset prior to or after update.
• Add Wifi filtering options to IRMQTTServer. (#679)
• Add advanced aircon/climate functionality to IRMQTTServer (#677)
• Initial prototype of a common interface for all A/Cs. (#664)
• Improve MQTT topic usage for feedback messages. (#663)
• Add multiple independent GPIO sending support via MQTT. (#661)

[Misc]

• Adjust kGreeHdrSpace to 4500 (#684, #686)
• Add Home Assistant mqtt climate instructions. (#682)
• Implement htmlEscape() to prevent XSS etc. (#681)
• Add F() Macros (#670)
• Update Daikin2's Cool mode min temp to 18C (#658)
• Change per byte bit-order in Electra protocol. (#648)
• Improve Daikin2 power on/off. (#647)

v2.5.6 (20190316)

[Bug Fixes]

• Fix Coolix A/C Class to handle special states better. (#633, #624)

[Features]

• Fix case style for recent A/C protocols. (#631)
• Update IRsend::send() to include all simple protocols. (#629, #628)
• Experimental basic support for 112 bit TCL AC messages (#627, #619)
• Add support for TECO AC (#622)
• Experimental support for Samsung 36 bit protocol (#625, #621)

[Misc]

• Set Coolix to default to 1 repeat. (#637, #636, #624, #439)
• Set Daikin2 modulation to 36.7kHz. (#635)
• Refactor IRVestelAC class to use portable code. (#617)
• Adjust Daikin2 timings and tolerance. (#616, #582)

v2.5.5 (20190207)

[Bug Fixes]

• Fix decoding of Samsung A/C Extended messages. (#610)
• Fix IRMQTTServer example to work with GPIO0 as IR_RX (#608)
• Fix incorrect #define usage. (#597, #596)

[Features]

• Add deep decoding/construction of Daikin2 messages (#600)
• Added Old Vestel A/C support (56 Bits) with full functions. (#607)

[Misc]

• Add ControlSamsungAC example code. (#599)
• Add how to send a state/air-con to IRsendDemo.ino (#594)

v2.5.4 (20190102)

[Features]

• Experimental basic support for 39 Byte Daikin A/C (#583)
• Handle send() repeats in A/C classes. Improve Coolix support. (#580)
• Add optional RX pin pullup and dump raw messages in IRMQTTServer.ino (#589)

[Misc]

• Make auto_analyse_raw_data.py work with Python3 (#581)
• Update CI/travis config due to esp8266 core 2.5.0 changes (#591)

v2.5.3 (20181123)

[Features]

• Add deep support for the Hitachi 28-Byte A/C Protocol (#563)
• Deep decoding for Whirlpool A/C (#572)
• Improve security options for IRMQTTServer example. (#575)
• Require a changed firmware password before upload. (#576)

[Misc]

• Add missing '}' in output of Auto analyse. (#562)
• Make A/C example code a bit more simple. (#571)

v2.5.2 (20181021)

[Bug Fixes]

• Add missing send() method to IRPanasonicAC class. (#545)
• Add missing sendWhirlpoolAC() to IRMQTTServer.ino (#558)

[Features]

• Add IR receiving support to IRMQTTServer. (#543)
• Pioneer support (#547)
• Add support for a second LG protocol variant. (#552)
• Support for short Panasonic A/C messages. (#553)
• Add support for Panasonic CKP series A/Cs. (#554)
• Experimental timer/clock support for Panasonic A/Cs. (#546)
• Add Made With Magic (MWM) support (#557)

[Misc]

• Grammar and typo fixes (#541, #549)
• Increase Panasonic A/C message tolerances. (#542)
• Added command mode2_decode in tools/ (#557)
• General code style cleanup (#560)

v2.5.1 (20181002)

[Bug Fixes]

• Correct the byte used for Samsung AC Swing. (#529)
• Fix not sending Samsung A/C messages in IRMQTTServer. (#529)

[Features]

• Experimental support for Electra A/C messages. (#528)
• Experimental support for Panasonic A/C messages. (#535)
• Samsung A/C fixes & improvements (#529)
• IRMQTTServer v0.6.0 (#530)

[Misc]

• Change required WifiManager lib version to v0.14
• Add alias for RAWTICK to kRawTick. (#535)
• Update sendLutron() status. (#515)
• Remove leftover debug message in IRrecvDumpV2 (#526)

v2.5.0 (20180919)

[Bug Fixes]

• Fix HTML menu error for GICABLE in IRMQTTServer. (#516)
• Fix Mitsubishi A/C mode setting. (#514)
• Add missing ',' in auto analyse tool generated code. (#513)
• Fix Fujitsu checksum validation. (#501)
• Remove errant Repeat debug statement in IRMQTTServer. (#507)

[Features]

• Mitsubishi A/C decode improvements. (#514)
• Basic support for Whirlpool A/C messages. (#511)
• Basic support for Samsung A/C messages. (#512)
• Experimental support for detailed Samsung A/C messages. (#521)
• Experimental support for detailed Coolix A/C messages. (#518)
• Experimental support for Lutron protocol. (#516)
• Calculate and use average values for timings in analysing tool. (#513)

[Misc]

• Style change from using #define's for constants to const kConstantName.
• Improve the JVC example code.

v2.4.3 (20180727)

[Bug Fixes]

• Handle Space Gaps better in auto analyse tool. (#482)
• Correct min repeat for GICABLE in IRMQTTServer. (#494)

[Features]

• Add static IP config option to IRMQTTServer (#480)
• Full decoding/encoding support for the Haier YRW02 A/C. (#485 #486 #487)

[Misc]

• Update LG (28-bit) HDR mark and space timings. (#492)
• Spelling and grammar fixes (#491)

v2.4.2 (20180601)

[Bug Fixes]

• Timing Fix: Update the period offset compensation.

[Features]

• Improvements for IRMQTTServer example (#466)

v2.4.1 (20180520)

[Bug Fixes]

• Fix crash in IRMQTTServer when compiled under Arduino IDE. (#455)
• Default bit length not set for RCMM in IRMQTTServer example. (#456)
• Bad acknowledgements for some A/C protocols in IRMQTTServer example. (#460)

[Features]

• Allow disabling the use of delay() calls. (#450)
• Initial support for G.I. Cable protocol. (#458)
• Support of Hitachi A/C 13 & 53 byte messages. (#461)

[Misc]

• Auto Analyse Raw Data script converted to Python. (#454)

v2.4.0 (20180407)

[Bug Fixes]

• Add missing WiFi.begin() call to IRGCTCPServer example. (#433)
• Add missing sendHaierAC() to IRMQTTServer example. (#434 & #444)
• Make mqtt clientid unique in IRMQTTServer example. (#444)

[Features]

• Initial Mitsubishi projector protocol support. (#442)
• Experimental support of Hitachi A/C messages. (#445)
• Improve transmission pulse modulation support. Allow disabling of transmission frequency modulation.(#439)

[Misc]

• IRMQTTServer example improvements. (#444)

v2.3.3 (20180302)

[Bug Fixes]

• Ensure the IR LED is off before we start. (#405)

[Features]

• Experimental decode support for Gree HVAC units (#397)
• Initial support for Haier A/Cs. (#409)
• Improve timing accuracy of unit tests. (#403)
• Rework matchData() to handle equal total data bit time protocols. (#408)

[Misc]

• Add startup text to IRrecvDumpV2 and IRrecvDemo (#412)
• Tweak timings on Fujitsu A/C header (#418)
• AutoAnalyseRawData.sh: Add some support for handling larger than 64 bit codes. (#419)
• Use better comments for send GPIO in examples. (#425)

v2.3.2 (20180126)

[Bug Fixes]

• Integer underflow caused device not to respond in sendJVC() (#401)

[Features]

• Initial support for sending & receiving Carrier HVAC codes. (#387)
• Add Pronto HEX code support to gc_decode tool. (#388)

[Misc]

• Make mDNS independent of MQTT in IRMQTTServer example code. (#390 #391)

v2.3.1 (20171229)

[Bug Fixes]

• Setting #define SEND_FUJITSU_AC false caused a compilation error (#375)
• Integer underflow caused huge space() in sendGeneric() (#381)

[Features]

• Support sending & receiving Lasertag codes. (#374)
• Reduce the library footprint by using a new sendGeneric() routine. (#373)

[Misc]

• Lots of grammar & typo fixes. (#378)
• Update keywords.txt for Arduino IDE users (#371)
• Update pins in examples so they are compatible with Adafruit boards. (#383)

v2.3.0 (20171208)

[Bug Fixes]

• Panasonic-based protocols had incorrect message gap. (#358)
• Formatting error for large rawData values in example code. (#355)
• Off-by-one error in payload_copy malloc. (#337)
• Off-by-one error in unit test helper routines (#363)

[Features]

• Support sending and receiving Midea A/C codes.
• Support for receiving Kelvinator A/C codes. (#332)
• Support more operation features for Daikin A/Cs.
• Support for decoding Daikin A/Cs.
• Support sending and receiving Toshiba A/Cs. (#333)
• Support sending and receiving AR-DB1 Fujitsu A/C codes. (#367)
• Add new AutoAnalyseRawData.sh & RawToGlobalCache.sh tools (#345) (#343)
• Support for MagiQuest wands. (#365)

[Misc]

• Add checksum verification to Kelvinator A/C decodes. (#348)
• Changes to the threshold reporting of UNKNOWN messages (#347)
• Major re-work of Daikin A/C support.
• Sending for all A/Cs added to MQTT example code.
• MQTT example code improvements. (#334)
• IRrecvDumpV2 significant output improvements. (#363)
• Improved unit test coverage for the library.

v2.2.1 (20171025)

[Features]

• Support for sending and decoding Nikai TV messages. (#311, #313)
• gc_decode: External utility to decode Global Cache codes. (#308, #312)
• IRMQTTServer: Example code to send IR messages via HTTP & MQTT. (#316, #323)
• Improve converting 64bit values to hexadecimal. (#318)

[Misc]

• IRrecvDump.ino code is now deprecated. Use IRrecvDumpV2.ino instead. (#314)

v2.2.0 (20170922)

[Bug Fixes]

• Add printing output of RC-MM and RC-5X protocols in example code. (#284)
• LG timing improvements based on observations (#291)

[Features]

• Automatic capture timing calibration for some protocols. (#268)
• Support for creating & sending Trotec AC codes. (#279)
• Support for creating & sending Argo Ulisse 13 DCI codes. (#280 #300)
• Move to 2 microsecond timing resolution for capture of codes. (#287)
• Capture buffer changes:
• Size at runtime. (#276)
• Message timeout at runtime. (#294)
• Simplify creating & using a second buffer (#303)
• New example code:
  • Trotec A/C (#279)
  • LG A/C units (#289)
  • Argo Ulisse 13 DCI codes. (#300)

v2.1.1 (20170711)

[Bug Fixes]

• GlobalCache incorrectly using hardware offset for period calc. (#267)

[Features]

• Support reporting of 'NEC'-like 32-bit protocols. e.g. Apple TV remote (#265)
• Add an example of sendRaw() to IRsendDemo.ino (#270)

v2.1.0 (20170704)

[Features]

• Support for sending Pronto IR codes. (#248)
• Support for sending Fujitsu A/C codes. (#88)
• Minor improvements to examples.

v2.0.3 (20170618)

[Bug fixes]

• Capture buffer could become corrupt after large message, breaking subsequent decodes. (#253)

v2.0.2 (20170615)

[Bug fixes]

• Correct decode issue introduced in v2.0.1 affecting multiple protocol decoders (#243)
• Correct post-message gap for the Panasonic protocol(s) (#245)
• Incorrect display of the decoded uint64_t value in the example code. (#245)

v2.0.1 (20170614)

[Bug fixes]

• Decoding protocols when it doesn't detect a post-command gap, and there is no more data. (#243)
• Incorrect minimum size calculation when there is no post-command gap. (#243)

v2.0.0 - 64 bit support and major improvements (20170612)

[Misc]

• This is almost a complete re-write of the library.

[Features]

• All suitable protocols now handle 64-bit data messages and are repeatable via an optional argument.
• Unit tests for all protocols.
• Far better and stricter decoding for most protocols.
• Address & command decoding for protocols where that information is available.
• Much more precise timing for generation of signals sent.
• Lower duty-cycles for some protocols.
• Several new protocols added, and some new sending and decoding routines for existing ones.
• Ability to optionally chose which protocols are included, enabling faster decoding and smaller code footprints if desired.
• Support for far larger capture buffers. (e.g. RAWLEN > 256)

[Bug fixes]

• Numerous bug fixes.

v1.2.0 (20170429)

[Features]

• Add ability to copy IR capture buffer, and continue capturing. Means faster and better IR command decoding.
• Reduce IRAM usage by 28 bytes.
• Improve capture of RC-MM & Panasonic protocols.
• Upgrade IRrecvDumpV2 to new IR capture buffer. Much fewer corrupted/truncated IR messages.

v1.1.1 (20170413)

[Bug fixes]

• Fix a reported problem when sending the LG protocol. Preemptive fix for possible similar cases.
• Fix minor issues in examples.

[Features]

• Add documentation to some examples to aid new people.
• Add ALPHA support for RC-MM protocol. (Known to be currently not 100% working.)