Cityflow Installationn

[mandharepa]

Hello all,
I am trying to install cityflow on Oracle Virtual box but getting the following error on windows 10...

$ sudo pip install .
Processing /media/sf_PhD_data/execution/colight-master/CityFlow
Building wheels for collected packages: CityFlow
Building wheel for CityFlow (setup.py) ... error
ERROR: Command errored out with exit status 1:
command: /usr/bin/python3 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-req-build-graxh3bh/setup.py'"'"'; file='"'"'/tmp/pip-req-build-graxh3bh/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(file);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, file, '"'"'exec'"'"'))' bdist_wheel -d /tmp/pip-wheel-k710sfqb
cwd: /tmp/pip-req-build-graxh3bh/
Complete output (35 lines):
running bdist_wheel
running build
running build_ext
CMake Error: The current CMakeCache.txt directory /tmp/pip-req-build-graxh3bh/CMakeCache.txt is different than the directory /media/sf_PhD_data/execution/colight-master/CityFlow where CMakeCache.txt was created. This may result in binaries being created in the wrong place. If you are not sure, reedit the CMakeCache.txt
Traceback (most recent call last):
File "", line 1, in
File "/tmp/pip-req-build-graxh3bh/setup.py", line 60, in
setup(
File "/usr/lib/python3/dist-packages/setuptools/init.py", line 144, in setup
return distutils.core.setup(**attrs)
File "/usr/lib/python3.8/distutils/core.py", line 148, in setup
dist.run_commands()
File "/usr/lib/python3.8/distutils/dist.py", line 966, in run_commands
self.run_command(cmd)
File "/usr/lib/python3.8/distutils/dist.py", line 985, in run_command
cmd_obj.run()
File "/usr/lib/python3/dist-packages/wheel/bdist_wheel.py", line 223, in run
self.run_command('build')
File "/usr/lib/python3.8/distutils/cmd.py", line 313, in run_command
self.distribution.run_command(command)
File "/usr/lib/python3.8/distutils/dist.py", line 985, in run_command
cmd_obj.run()
File "/usr/lib/python3.8/distutils/command/build.py", line 135, in run
self.run_command(cmd_name)
File "/usr/lib/python3.8/distutils/cmd.py", line 313, in run_command
self.distribution.run_command(command)
File "/usr/lib/python3.8/distutils/dist.py", line 985, in run_command
cmd_obj.run()
File "/tmp/pip-req-build-graxh3bh/setup.py", line 32, in run
self.build_extension(ext)
File "/tmp/pip-req-build-graxh3bh/setup.py", line 56, in build_extension
subprocess.check_call(['cmake', ext.sourcedir] + cmake_args, cwd=self.build_temp, env=env)
File "/usr/lib/python3.8/subprocess.py", line 364, in check_call
raise CalledProcessError(retcode, cmd)
subprocess.CalledProcessError: Command '['cmake', '/tmp/pip-req-build-graxh3bh', '-DCMAKE_LIBRARY_OUTPUT_DIRECTORY=/tmp/pip-req-build-graxh3bh/build/lib.linux-x86_64-3.8', '-DPYTHON_EXECUTABLE=/usr/bin/python3', '-DVERSION="0.1"', '-DCMAKE_BUILD_TYPE=Release']' returned non-zero exit status 1.

ERROR: Failed building wheel for CityFlow
Running setup.py clean for CityFlow
Failed to build CityFlow
Installing collected packages: CityFlow
Running setup.py install for CityFlow ... error
ERROR: Command errored out with exit status 1:
command: /usr/bin/python3 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-req-build-graxh3bh/setup.py'"'"'; file='"'"'/tmp/pip-req-build-graxh3bh/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(file);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, file, '"'"'exec'"'"'))' install --record /tmp/pip-record-oi9cw0zl/install-record.txt --single-version-externally-managed --compile --install-headers /usr/local/include/python3.8/CityFlow
cwd: /tmp/pip-req-build-graxh3bh/
Complete output (37 lines):
running install
running build
running build_ext
CMake Error: The current CMakeCache.txt directory /tmp/pip-req-build-graxh3bh/CMakeCache.txt is different than the directory /media/sf_PhD_data/execution/colight-master/CityFlow where CMakeCache.txt was created. This may result in binaries being created in the wrong place. If you are not sure, reedit the CMakeCache.txt
Traceback (most recent call last):
File "", line 1, in
File "/tmp/pip-req-build-graxh3bh/setup.py", line 60, in
setup(
File "/usr/lib/python3/dist-packages/setuptools/init.py", line 144, in setup
return distutils.core.setup(**attrs)
File "/usr/lib/python3.8/distutils/core.py", line 148, in setup
dist.run_commands()
File "/usr/lib/python3.8/distutils/dist.py", line 966, in run_commands
self.run_command(cmd)
File "/usr/lib/python3.8/distutils/dist.py", line 985, in run_command
cmd_obj.run()
File "/usr/lib/python3/dist-packages/setuptools/command/install.py", line 61, in run
return orig.install.run(self)
File "/usr/lib/python3.8/distutils/command/install.py", line 589, in run
self.run_command('build')
File "/usr/lib/python3.8/distutils/cmd.py", line 313, in run_command
self.distribution.run_command(command)
File "/usr/lib/python3.8/distutils/dist.py", line 985, in run_command
cmd_obj.run()
File "/usr/lib/python3.8/distutils/command/build.py", line 135, in run
self.run_command(cmd_name)
File "/usr/lib/python3.8/distutils/cmd.py", line 313, in run_command
self.distribution.run_command(command)
File "/usr/lib/python3.8/distutils/dist.py", line 985, in run_command
cmd_obj.run()
File "/tmp/pip-req-build-graxh3bh/setup.py", line 32, in run
self.build_extension(ext)
File "/tmp/pip-req-build-graxh3bh/setup.py", line 56, in build_extension
subprocess.check_call(['cmake', ext.sourcedir] + cmake_args, cwd=self.build_temp, env=env)
File "/usr/lib/python3.8/subprocess.py", line 364, in check_call
raise CalledProcessError(retcode, cmd)
subprocess.CalledProcessError: Command '['cmake', '/tmp/pip-req-build-graxh3bh', '-DCMAKE_LIBRARY_OUTPUT_DIRECTORY=/tmp/pip-req-build-graxh3bh/build/lib.linux-x86_64-3.8', '-DPYTHON_EXECUTABLE=/usr/bin/python3', '-DVERSION="0.1"', '-DCMAKE_BUILD_TYPE=Release']' returned non-zero exit status 1.
----------------------------------------
ERROR: Command errored out with exit status 1: /usr/bin/python3 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-req-build-graxh3bh/setup.py'"'"'; file='"'"'/tmp/pip-req-build-graxh3bh/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(file);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, file, '"'"'exec'"'"'))' install --record /tmp/pip-record-oi9cw0zl/install-record.txt --single-version-externally-managed --compile --install-headers /usr/local/include/python3.8/CityFlow Check the logs for full command output.

how to resolve it?
thanks in advanced.... :)

[Sheagu]

I'm stuck with a similar issue. Have you fix it?

[zhc134]

Did you run pip install . at CityFlow root directory?